Abstract:Polymer Bonded Explosives (PBX) is a kind of composite materials with highly filled molding explosive particles (normally more than 95%) and a small amount of binders (less than 5%). The effective detection of internal cracks in PBX is of great significance for structural integrity assessment and safety reliability evaluation. Ultrasonic phased array detection and imaging methods show great advantages and potential in the detection of crack defects. But acoustic test results indicate that PBX has unique characteristics with low longitudinal wave velocity (~3000 m·s -1 ) and strong attenuation (attenuation coefficient~400 dB·m -1 for 2.5 MHz ultrasound). When the defect is imaged by traditional ultrasonic TFM method, the structural noises at the boundaries between particles lead to low signal-to-noise ratio (SNR) in the FMC signals and strong background noise in reconstructed image, which will bring in interference for the detect of cracks. To realize the high SNR imaging of crack defects in PBX, an ultrasonic imaging algorithm based on baseband nonlinear synthetic focusing (BB-NSF) is proposed. By utilizing the spatial coherence of the received signals in full matrix capture (FMC) data, the pixel intensity at defect position could be enhanced while the background noise could be drastically weakened. The delay rule of the algorithm is modified according to the characteristics of PBX surface configuration. In this way, the high SNR imaging of crack defects with different orientations of PBX surface configuration is realized, and the quality of the reconstructed images is compared and evaluated quantitatively. Meanwhile, the base band transformation in calculation process optimization could significantly release calculation burden and increase imaging efficiency. Experimental results show that the proposed algorithm could effectively suppress background noises and significantly improve detection capability for PBX cracks. The effective suppression to background noise makes the defect more highlighting and being easily distinguished. For BB-NSF algorithm, spatial coherence coefficient p is the crucial parameter used for dynamic regulation of SNR of reconstructed image. When p value is more than 2.0, the SNR of the ultrasonic reconstructed image of PBX crack defect is improved by more than 10 dB compared with the traditional linear synthetic focusing imaging. With the increase of p value, the SNR is further improved, while the calculation efficiency for a single image is almost kept stable. Moreover, the increase of SNR to some extent improves the far-field detect capability. Besides, with BB-NSF algorithm, flexible transducers inhibits different imaging characteristics of for cracks with different orientations and depths in curved PBX specimens. For defects with large orientation angle and buried depth, the tip, root and shape of cracks can be completely presented. For defects with small orientation angle and buried depth, part of shape and contour features will be missing. In conclusion, BB-NSF algorithm shows the advantage of high SNR and calculation efficiency in imaging PBX cracks, and inhibits great application prospect in imaging internal defects of other strongly attenuated composites.

Deep learning-based online image analysis of the water suspension granulation process for 1,3,5-trinitro-1,3,5-triazacyclohexane-based polymer-bonded explosives

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Direct Detection of Explosives on Solid Surfaces by Mass Spectrometry with an Ambient Ion Source Based on Dielectric Barrier Discharge

Real‐time Droplet Size Analysis Using Laser Micrometer As a Process Analytical Technology Tool for Continuous Dripping Process

Quantitative Analysis of Moisture Content and Particle Size in a Fluidized Bed Granulation Process Using Near Infrared Spectroscopy and Acoustic Emission Combined with Data Fusion Strategies.

Raman spectroscopy combined with machine learning for the quantification of explosives in mixtures

Preparation of HMX/TATB spherical composite explosive by droplet microfluidic technology

Electrostatic spraying synthesis of energetic RDX@NGEC nanocomposites

Role of adhesion molecules in the progression of peritoneal sclerosis.

High SNR ultrasonic imaging of crack defects in particles filled composite explosives

A new insight into the mechanical behavior of high-quality RDX in pressed polymer bonded explosives

Size-Dependent Shock Response Mechanisms in Nanogranular RDX: A Reactive Molecular Dynamics Study

Preparation, High-Density Spherical, and Low Sensitivity of RDX/NC/PMMA Composite Particles

Highly cross-linked polymeric nanoparticles with aggregation-induced emission for sensitive and recyclable explosive detection

Explosives detection using photoneutrons produced by X-rays

Rapid, on-site identification of explosives in nanoliter droplets using a UV reflected fiber optic sensor.

Detection of Trace Explosives Using a Novel Sample Introduction and Ionization Method

Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

European rheumatology. Manpower.

Regulation of gonadotropin-releasing hormone and its receptor gene expression by 17beta-estradiol in cultured human granulosa-luteal cells.

Preparation of agglomeration-free composite energetic microspheres taking PMMA-PVA with honeycomb structure as template via the molecular collaborative self-assembly