Abstract:All-solid-state-batteries (ASSBs) are considered the future replacements for traditional lithium-ion batteries, thanks to their superior energy density and enhanced safety. The ionic conductivity of solid electrolytes (SEs) could be improved to match that of liquid electrolytes through careful material design and optimization. However, the relatively sluggish kinetics at the interface between at the active material (lithium metal or cathode materials) and the SE interface remain a hurdle for the wider adoption of ASSBs. The SE’s contact with the anode and cathode materials is inferior compared to that of its liquid counterpart, and improper working conditions can easily lead to the formation of many voids and pores. This results in an increased interface resistance and a deteriorated power density of the ASSB cell. The mechanical contact between the anode material and the SE is more significant due to the larger volumetric expansion and contraction during cycling compared to the cathode side. In addition, high stack pressure and plating current density can also induce the penetration of lithium dendrites. Therefore, it is vital to explore the stability envelope for the anode-SE interface, namely determining the operation condition under which void formation and dendrite growth could be suppressed for the effective design and utilization of ASSBs. Pressure and current density are two controllable condition parameters in the operation of ASSBs 1, 2 . High current density can lead to the formation of numerous voids at the Li/SE interface during stripping, as well as the initiation and growth of lithium metal dendrite within the SE. This results in increased polarization and potential battery failure. Applying stack pressure to the ASSB can stabilize the Li/SE interface during manufacturing and operation, as the creep of Li metal is believed to occur once its stress surpasses a certain threshold. The plastic ‘flow’ of Li metal could help to hinder the growth of voids 2 and keep good contact condition. However, at an excessively large pressure 3, 4 , dendrites can penetrate the SE, which cause a short-circuit in the ASSB and lead to failure 5 . Therefore, an electro-chemo-mechanical model that can describe the large-deformation mechanical properties of Li metal and its coupled mechanisms with the reactions at the Li/SE interface is essential for determining the stability envelope for stable stripping and plating of lithium in the ASSBs. In this work, a phase-field electro-chemo-mechanical model is proposed, in which the coupling of void diffusion, lattice annihilation, stripping and plating reactions, and mechanical properties of lithium metal are comprehensively described. The first contribution of this work is a comprehensive summary of the mechanical properties of the lithium metal under different temperatures and deformation rates, generating a unified deformation-mechanism map for the general battery manufacturing and characterizing community. Based on this map, our phase-field electro-chemo-mechanical model is developed to include important features below. The diffusion of vacancies and Li sites in the lithium metal is considered to simulate the lattice annihilation and the void formation during stripping. The flow of lithium metal caused by creeping or plasticity is incorporated in the kinetical equation of the order parameters. The plating and stripping kinetics are described by the modified Butler-Volmer equation in which the effect of vacancies is considered The general theory proposed in this work can simulate the electro-chemo-mechanical effects at different operation conditions for Li metal or other Li alloy anode materials, which is believed to be a powerful tool for the effective design, manufacturing and management of next-generation batteries. References: T. Krauskopf, H. Hartmann, W. G. Zeier, and J. Janek, ACS Appl Mater Interfaces, 11 (15), 14463-14477 (2019). T. Krauskopf, B. Mogwitz, C. Rosenbach, W. G. Zeier, and J. Janek, Advanced Energy Materials, 9 (44), (2019). D. Cao, K. Zhang, W. Li, Y. Zhang, T. Ji, X. Zhao, E. Cakmak, J. Zhu, Y. Cao, and H. Zhu, Advanced Functional Materials, (2023). L. Zhao, W. Li, C. Wu, Q. Ai, L. Guo, Z. Chen, J. Zheng, M. Anderson, H. Guo, J. Lou, Y. Liang, Z. Fan, J. Zhu, and Y. Yao, Advanced Energy Materials, (2023). E. J. Cheng, A. Sharafi, and J. Sakamoto, Electrochimica Acta, 223 85-91 (2017). Figure 1

Electro‐chemo‐mechanical failure of solid electrolyte induced by growth of internal lithium filaments

Mechanical Failure of Solid‐State Electrolyte Rooted in Synergy of Interfacial and Internal Defects

Role of interfacial defect on electro‐chemo‐mechanical failure of solid‐state electrolyte

Internal failure coupled with interfacial disintegration of solid-state electrolyte induced by the electrodeposition of lithium metal under defected interface

Electrochemical–Mechanical Coupling Is Essential to Predict Solid-Electrolyte Fracture during Li-Metal Plating

Modeling the Electro-Chemo-mechanical Failure at the Lithium-Solid Electrolyte Interface: Void Evolution and Lithium Penetration

Mesoscale Interrogation Reveals Mechanistic Origins of Lithium Filaments along Grain Boundaries in Inorganic Solid Electrolytes

Chemomechanical Origins of the Dynamic Evolution of Isolated Li Filaments in Inorganic Solid-State Electrolytes.

Accelerated Li Penetration and Crack Propagation Due to Mechanical Degradation of Sulfide‐Based Solid Electrolyte

Local electronic structure variation resulting in Li ‘filament’ formation within solid electrolytes

Stress-Controlled Three-Dimensional Phase Evolution in Lithium Iron Phosphate

Simulations of dendrite and crack and their interactions in solid electrolyte by phase field method

A Large-Deformation Phase-Field Model for Characterizing Electro-Chemo-Mechanical Failure Mechanisms at Li/Solid Electrolyte Interface

Modeling storage particle delamination and electrolyte cracking in cathodes of solid state batteries

Chemo-mechanical coupling phase-field modeling of lithium dendrite growth within solid electrolyte

Modeling of Void‐Mediated Cracking and Lithium Penetration in All‐Solid‐State Batteries

A continuum electro-chemo-mechanical gradient theory coupled with damage: Application to Li-metal filament growth in all-solid-state batteries

Coupled crack propagation and dendrite growth in solid electrolyte of all-solid-state battery

Electro-chemo-mechanical Failure of Solid-state Electrolyte Caused from Intergranular or Transgranular Damage Propagation in Polycrystalline Aggregates

Modeling of internal mechanical failure of all-solid-state batteries during electrochemical cycling, and implications for battery design