Investigation on the heat generation and heat sources of cylindrical NCM811 lithium-ion batteries

Xichao Li,Xiuliang Chang,Yan Feng,Zuoqiang Dai,Lili Zheng

DOI: https://doi.org/10.1016/j.applthermaleng.2024.122403

IF: 6.4

2024-01-15

Applied Thermal Engineering

Abstract:High temperature may cause the degradation of capacity and lifespan for the batteries, and even possibly triggers the thermal runaway. Therefore, in order to safe use of batteries, investigation on the heat generation characteristics of lithium-ion batteries is essential to guard the design of thermal management system (TMS). In this work, the heat generation rate (HGR) and heat sources of the 18650 NCM811 battery is investigated by both the isothermal calorimetry test and calculation using the modified Bernardi model, respectively. It is revealed that during charging or discharging, the irreversible heat increases rapidly at low SOC due to large internal resistance, while the reversible entropic heat becomes more important at about 40–60 % SOC due to high entropy coefficient therein. Moreover, the ratio between heat sources has been revealed. The irreversible heat is dominated among the heat sources during charging/discharging with a proportion of 76.33–96.65 %. Wherein, the ohmic heat contributes the most heat generation. Meanwhile, the reversible heat accounts for the smallest proportion of 3.25–23.67 %. It should be noted that current is the main influence factor to the HGR of the lithium-ion battery. With increasing the current, the irreversible HGR, especially ohmic heat, increases much faster than that of reversible heat, resulting in higher ratio. The calculation data are validated to be well consistent with experimental results, giving insights to the investigation of the heat generation of the lithium ion battery.

energy & fuels,engineering, mechanical,thermodynamics,mechanics

What problem does this paper attempt to address?

The paper primarily explores the thermal generation characteristics and heat source analysis of cylindrical NCM811 lithium-ion batteries during the charge and discharge process. The core issue of the study is to understand the heat characteristics generated by lithium-ion batteries during operation, which is crucial for designing effective thermal management systems (TMS) to ensure the safe use of the batteries.

Through isothermal calorimetry tests and calculation methods based on the improved Bernardi model, the paper comprehensively studies the heat generation rate (HGR) and heat sources of 18650-type NCM811 lithium-ion batteries. The main findings are as follows:

1. **Composition of Heat Sources**:
- Irreversible heat (mainly Ohmic heat) dominates during the charge and discharge process, accounting for 76.33% to 96.65%.
- Reversible heat accounts for a smaller proportion, ranging from 3.25% to 23.67%.
- Ohmic heat contributes the most, while reversible heat (entropy heat) contributes the least.

2. **Effect of Current**:
- As the current increases, the generation rate of irreversible heat (especially Ohmic heat) grows much faster than that of reversible heat, leading to a further increase in the proportion of irreversible heat.
- At low state of charge (SOC), due to higher internal resistance, irreversible heat increases rapidly; whereas at around 40%-60% SOC, due to higher entropy coefficients, reversible entropy heat becomes more significant.

3. **Experimental Validation**:
- The calculated data matches well with the experimental results, confirming the effectiveness of the improved Bernardi model.

In summary, the paper aims to deeply understand the thermal generation mechanisms of lithium-ion batteries under different operating conditions (such as different current intensities and states of charge) and reveals the relative contributions of various heat sources during the charge and discharge process. This is of great significance for developing efficient thermal management systems and ensuring battery safety.