Abstract:An integrated process that includes catalytic co-pyrolysis of biomass/plastic wastes and in-line catalytic upgrading of pyrolysis gas were conducted to simultaneously produce aromatics-rich bio-oil and carbon nanotubes (CNTs). The influences of feedstocks blending ratio on the characteristics of bio-oil and CNTs were established. The reaction mechanism of carbon deposition during the system was also probed. The results showed that co-feeding plastic to biomass siginificantly enhanced the selectivity of monoaromatics (benzene, toluene, and xylene) from 5.6% for pure biomass to the maximum yield of 44.4% for 75.0% plastic ratio, and decreased naphthalene and its derivates from 85.9 to 41.7% correspondingly. The most synergistic effect on BTX selectivity occurred at 25% of plastic ratio. The multi-walled CNTs were successfully synethsized on Ni catalyst by utilizing prolysis gas as feedstocks. For pure biomass, the least CNTs yield with ultrafine diameters of 3.9-8.5 nm was generated via disproportionation reaction of CO which was derived from decarboxylation and decarbonylation of oxygenates on the ZSM-5 acid sites. With the rise of plastic ratio, sufficient hydrocarbons were produced for CNTs growth, endowing CNTs with long and straight tube walls, along with uniform diameters (~16 nm). The CNTs yield increased as high as 139 mg/g-cata. In addition, the decreased CO2 inhibited dry reforming with C1-C4 hydrocarbons and deposited carbon, avoiding excessive etching of CNTs. Thereby, high-purity CNTs with less defects were fabricated when plastic ratio was beyond 50% in the feedstock. The strategy is expected to improve the sustainability and economic viability of biomass pyrolysis.

Catalytic hydrothermal liquefaction of Tetra Pak with Ni-xCe/CNTs

Effect of Ce in Ni10Cex/γ-Al2O3 for the in situ hydrodeoxidation of Tetra Pak bio-oil during hydrothermal liquefaction

Catalytic Dehydrogenation of Cyclohexane over Carbon Nanotubes-Supported Elecroless Nickel-plating Catalysts

Catalytic Hydrothermal Liquefaction for Bio-Oil Production over CNTs Supported Metal Catalysts

Production of catalytic-upgraded pyrolysis products from oiltea camellia shell and polypropylene using NiCe-X/Al2O3 and ZrO2 catalyst (X = Fe, Co)

Maximizing production of high-quality tar from catalytic upgrading of lignite pyrolysis volatiles over Ni-xCe/Y under CH4/CO2 atmosphere

Microwave catalytic co-pyrolysis of Chlorella vulgaris and high density polyethylene over activated carbon supported monometallic: Characteristics and bio-oil analysis

Simultaneous production of aromatics-rich bio-oil and carbon nanomaterials from catalytic co-pyrolysis of biomass/plastic wastes and in-line catalytic upgrading of pyrolysis gas

Co-pyrolysis of Chinese herb residue and polypropylene over Ni, Fe, Co and Cu/AC: Co-production and formation mechanism of carbon nanomaterials, liquid oil and pyrolysis gas

Optimizing Ni–Ce/HZSM-5 Catalysts for Ex-Situ Conversion of Pine Wood Pyrolytic Vapours into Light Aromatics and Phenolic Compounds

Plasma-catalytic benzene steam reforming over Ce doped Ni-HAP catalysts: Insights into enhanced oxygen activity

Catalytic hydroconversion of two lignin-related model compounds over Ni/CeO2

Insights into Influence of CeO2 Crystal Structure Effects on Hydrothermal Hydrogenation for Palmitic Acid over Ni/CeO2 Catalysts

Encapsulation Ni in HZSM-5 for catalytic hydropyrolysis of biomass to light aromatics

Catalytic pyrolysis of toluene as biomass tar model component using Ni/HZSM-5 modified by CeO2 and MgO promoters

Enhancement of Microalgae Bio-Oil Quality Via Hydrothermal Liquefaction Using Functionalized Carbon Nanotubes

Facile Synthesis of Multi-Layered Nanostructured Ni/Ceo2 Catalyst Plus In-Situ Pre-Treatment for Efficient Dry Reforming of Methane

Insights into influence of CeO 2 crystal structure effects on hydrothermal hydrogenation for palmitic acid over Ni/CeO 2 catalysts

Pyrolysis of biomass Tar model compound with various Ni-based catalysts: Influence of promoters characteristics on hydrogen-rich gas formation

Investigating the effect of nano-nickel-based catalyst Ni-Me/HZSM-5 on in situ catalytic pyrolysis of distillers dried grains with solubles

Catalytic deoxygenation of carboxyl compounds in the hydrothermal liquefaction crude bio-oil via in-situ hydrogen supply by CuO-CeO2/ γ -Al2O3 catalyst