Abstract:Oxide dispersion strengthened FeCrAl alloys dispersed high-density nano-oxides in the matrix show outstanding corrosion resistance and mechanical properties. However, ODS FeCrAl alloys achieve the high strength generally at the expense of ductility in some way. Here, a method by introducing a bimodal grain structure was designed to overcome the strength-ductility tradeoff. In this work, ODS FeCrAl alloys were successfully fabricated through various mechanical alloying time, combined with spark plasma sintering under the vacuum of less than 4Pa. Microstructural characterization showed that the average grains size and nano-oxides size decrease gradually, and the density of nano-oxides increases, as the milling time increases. Mechanical properties revealed that both the strength and ductility were significantly synergistic enhanced with increasing milling time. The bimodal grain distribution characterized by electron backscatter diffraction (EBSD) (vacuum degree was less than 5E-5pa) was beneficial for the activation of the back stress strengthening and the annihilation of these microcracks, thus achieving the excellent ductility (27.65%). In addition, transmission electron microscope (TEM) characterization under the vacuum degree of less than 10-6pa illustrated that ultra-high-density nano-oxides (9.61E22/m3) was crucial for enhancing the strength of ODS FeCrAl alloys (993MPa). The strengthening mechanism superposition, based on the model of nano-oxides interrelated with the dislocation, illustrated an excellent agreement with experimental results from yield strength strengthening mechanisms. To our best knowledge, H40 (milled for 40h, and sintered at 1100C) alloy presents the outstanding strength with the exceptional ductility among all studied ODS FeCrAl alloys, which makes it the promising cladding materials for the accident tolerant fuel cladding.

Properties of intragranular-oxide-strengthened Fe alloys fabricated by a versatile facile and scalable route

Oxidation Mechanism of Three Fe-Al Alloys with and Without Addition of 0.1 At% Yttrium at 800 °C

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Effect of oxide nanoparticles on the mechanical properties of novel cobalt-free FeCrNi medium entropy alloys

Effects of rare-earth yttrium on crystallization and magnetic properties of Fe71 .4Si13B9.6Mo2Cr1Cu1P2nanocrystalline alloy

Achieving ultrahigh strength in oxide-dispersion-strengthened CoCrNi alloy via in situ formation of coherent Y-Ti-O nanoprecipitates

Enhanced strength-ductility combination by introducing bimodal grains structures in high-density oxide dispersion strengthened FeCrAl alloys fabricated by spark plasma sintering technology

Fe/amorphous-Al 2 SiO 5 composites fabricated by low-temperature solid-phase reaction densification achieve synergistically enhanced structural and soft magnetic properties

A novel cobalt-free oxide dispersion strengthened medium-entropy alloy with outstanding mechanical properties and irradiation resistance

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

Microstructure and mechanical properties of oxide dispersion strengthened FeNiMnCr high-entropy alloy fabricated by spark plasma sintering

Fe content influence on the microstructure of solution-treated Sm-Co-Fe-Cu-Zr alloys

Microstructure, Mechanical Properties, and Sliding Wear Behavior of Oxide-Dispersion-Strengthened FeMnNi Alloy Fabricated by Spark Plasma Sintering

Development of Y2O3 Dispersion-Strengthened Copper Alloy by Sol-Gel Method

Design of Fe-based nanocrystalline alloys with superior magnetization and manufacturability

Effect of Nano-Y2O3 Content on Microstructure and Mechanical Properties of Fe18Cr Films Fabricated by RF Magnetron Sputtering

High performance Fe-based nanocrystalline alloys with excellent thermal stability

In-situ synthesis of Yttria-based precipitates and their effects on Fe12Cr6Al in laser powder bed fusion

Microstructure and properties of oxide-reinforced FeCrAl matrix alloy manufactured by selective laser melting

Microstructural evolution of a Y2O3 network reinforced Ni–Co based superalloy fabricated by spark plasma sintering

Preparation, Magnetic and Mechanical Properties of Fe/Ni-Based Amorphous Fibers