Abstract:The importance of initial creep stress is analyzed, and a new constitutive model is constructed based on the existing viscoplastic constitutive model, which takes the initial creep stress into account. The numerical form is developed by using C++ in FLAC3D, and the rationality of the constitutive model is verified by engineering application. With the increasing depth of engineering in rock masses, the issue of significant rheological deformation becomes notably prominent. To accurately characterize the deformation and failure behavior of the surrounding rock near the goaf in deep small coal pillars, we have developed a viscoelastic–plastic constitutive model that takes into account the initial stress associated with creep. This model builds upon an existing viscoelastic–plastic constitutive framework and is implemented numerically using C++ in the FLAC3D. The Oedometer test method is used to check the creep components and the calculated parameter (η/G) ensure convergence of numerical operations. We conducted both pre‐improvement and post‐improvement tests of the constitutive model in a simple numerical analysis of roadways. The enhanced model demonstrates improved accuracy in deviational stress calculations and proves suitable for modeling deep, soft roadways. Furthermore, we applied the improved model to simulate actual working conditions at Zhaozhuang Mine, where mining operations near the working face induce a fracture zone of approximately 3 m in the small coal pillar located at the goaf's edge. The new model closely aligns with the observed results, further validating its suitability for tunneling along the goaf. Tunneling and mining activities result in significant deformation at various locations, including the shoulder socket of the working face, the top angle of the coal pillar, and the bottom angle of the floor. The crushing zone at the working face extends up to 4 m. Rheological effects transform the triangular elastic core, from its original high‐pressure elastic state to a fracture and plastic zone in the deep coal. Stress in deep coal is transmitted along the triangular elastic core. Numerical simulation results closely match the excavation profile of the tunneling, providing valuable insights into the impact of mining activities. This study can provide reference for deformation of similar geological conditions and engineering situation.

Comparative study on the deformation moduli of roadway surrounding rock in coal mines: a case study

Elastoplastic analysis on deformation and failure characteristics of surrounding rock of soft-coal roadway based on true triaxial loading and unloading tests

Experimental and Numerical Study of Water–Rock Coupling Creep under Uniaxial Compression

Case Study of Roadway Deformation Failure Mechanisms: Field Investigation and Numerical Simulation

A New Method for Intuitively Reflecting the Deterioration Characteristics of the Rock Surrounding Roadways and Its Application Based on the Strain Softening Model

Field and Numerical Study on Deformation and Failure Characteristics of Deep High-Stress Main Roadway in Dongpang Coal Mine

True 3D geomechanical model test for research on rheological deformation and failure characteristics of deep soft rock roadways

Study on Failure Mechanism and Control Technology of Roadway Surrounding Rock under Complex Occurrence Coal Seam

Study on the Failure Mechanism for Coal Roadway Stability in Jointed Rock Mass Due to the Excavation Unloading Effect

Experimental research on deformation failure process of roadway tunnel in fractured rock mass induced by mining excavation

Experimental Test on Nonuniform Deformation in the Tilted Strata of a Deep Coal Mine

True Triaxial Test and Research into Bolting Support Compensation Stresses for Coal Roadways at Different Depths

Deformation and Failure Characteristics and Control Technology of Roadway Surrounding Rock in Deep Coal Mines

A Simulation Experimental Study on the Advance Support Mechanism of a Roadway Used with the Longwall Coal Mining Method

Failure mechanisms and reinforcement support of roadway in deep coal seam: A case study

Numerical Simulation of Mechanical Characteristics of Roadway Surrounding Rock under Dynamic and Static Loading

Failure Mechanisms and Reinforcement Support of Soft Rock Roadway in Deep Extra-Thick Coal Seam: A Case Study

A viscoelastic–plastic constitutive model incorporating creep initiation stress for surrounding rock in deep roadways and its practical application

Asymmetric deformation failure mechanism and support technology of roadways under non-uniform pressure from a mining disturbance

Study on failure mechanism and control of surrounding rock of inclined strata crossing roadway in deep coal mine

Research on the evolution of the deviatoric stress and control of a gas extraction roadway under mining influence