Abstract:Abstract In deep underground mining, achieving stable support for roadways along with long service life is critical and the complex geological environment at such depths frequently presents a major challenge. Owing to the coupling action of multiple factors such as deep high stress, adjacent faults, cross-layer design, weak lithology, broken surrounding rock, variable cross-sections, wide sections up to 9.9 m, and clusters of nearby chambers, there was severe deformation and breakdown in the No. 10 intersection of the roadway of large-scale variable cross-section at the − 760 m level in the Nanfeng working area of the Wuyang Coal Mine. As there are insufficient examples in engineering methods pertaining to the geological environment described above, the numerical calculation model was oversimplified and support theory underdeveloped; therefore, it is imperative to develop an effective support system for the stability and sustenance of deep roadways. In this study, a quantitative analysis of the geological environment of the roadway through field observations, borehole peeking, and ground stress testing is carried out to establish the FLAC 3D variable cross-section crossing roadway model. This model is combined with the strain softening constitutive (surrounding rock) and Mohr-Coulomb constitutive (other deep rock formations) models to construct a compression arch mechanical model for deep soft rock, based on the quadratic parabolic Mohr criterion. An integrated control technology of bolting and grouting that is mainly composed of a high-strength hollow grouting cable bolt equipped with modified cement grouting materials and a high-elongation cable bolt is developed by analyzing the strengthening properties of the surrounding rock before and after bolting, based on the Heok-Brown criterion. As a result of on-site practice, the following conclusions are drawn: (1) The plastic zone of the roof of the cross roadway is approximately 6 m deep in this environment, the tectonic stress is nearly 30 MPa, and the surrounding rock is severely fractured. (2) The deformation of the roadway progressively increases from small to large cross-sections, almost doubling at the largest cross-section. The plastic zone is concentrated at the top plate and shoulder and decreases progressively from the two sides to the bottom corner. The range of stress concentration at the sides of the intersection roadway close to the passageway is wider and higher. (3) The 7 m-thick reinforced compression arch constructed under the strengthening support scheme has a bearing capacity enhanced by 1.8 to 2.3 times and increase in thickness of the bearing structure by 1.76 times as compared to the original scheme. (4) The increase in the mechanical parameters c and φ of the surrounding rock after anchoring causes a significant increase in σ c and σ t ; the pulling force of the cable bolt beneath the new grouting material is more than twice that of ordinary cement grout, and according to the test, the supporting stress field shows that the 7.24 m surrounding rock is compacted and strengthened in addition to providing a strong foundation for the bolt (cable). On-site monitoring shows that the 60-day convergence is less than 30 mm, indicating that the stability control of the roadway is successful.

A New Method for Intuitively Reflecting the Deterioration Characteristics of the Rock Surrounding Roadways and Its Application Based on the Strain Softening Model

Study Of Surrounding Rock Damage Induced By Tunnel Boring Machine Driving Tunnel At West Route Of South To North Water Transfer Project

Study on Failure Mechanism and Control Technology of Roadway Surrounding Rock under Complex Occurrence Coal Seam

True 3D geomechanical model test for research on rheological deformation and failure characteristics of deep soft rock roadways

Elastoplastic analysis on deformation and failure characteristics of surrounding rock of soft-coal roadway based on true triaxial loading and unloading tests

Research on Soft Rock Damage Softening Model and Roadway Deformation and Failure Characteristics

A Strain-Softening Constitutive Model of Heterogeneous Rock Mass Considering Statistical Damage and Its Application in Numerical Modeling of Deep Roadways

Evolution of Surrounding Rock in Pioneering Roadway with Very Weakly Cemented Strata Through Monitoring and Analysising

Stability Analysis and Support Control for a Jointed Soft Rock Roadway Considering Different Lateral Stresses

Physical model test and numerical simulation on the failure mechanism of the roadway in layered soft rocks

Research on Deformation and Failure Mechanism of Surrounding Rock in Inclined Strata with Soft–Hard Interbedded Roadways

Deformation Features of Roadway in Highly Stressed Soft Rock and Design of Supporting Parameters

Failure and stability analysis of deep soft rock roadways based on true triaxial geomechanical model tests

Study on Deformation Failure Mechanism and Control Technology of Surrounding Rock in Soft Rock Roadway

Surrounding Rock Deformation Properties and Determination of Support Parameters of Soft Rock Roadway in Deep Mine

Theoretical analysis and numerical simulation analysis of energy distribution characteristics of surrounding rocks of roadways

Study on Mechanical Properties and Control Technology of Surrounding Rock in the Fracture Zone of a Roadway

Reused roadway failure mechanism and control strategies: a case study of the Shuangliu Coal Mine, China

Failure Analysis of Intersections of Large-Scale Variable Cross-Section Roadways in Deep Soft Rock and Study of Integrated Control Technology of Bolting and Grouting

Investigating the Mechanism of Continuous–Discrete Coupled Destabilization of Roadway-Surrounding Rocks in Weakly Cemented Strata under Varying Levels of Moisture Content

Deformation and Failure Mechanism of Roadway Sensitive to Stress Disturbance and Its Zonal Support Technology