Abstract:Abstract In deep underground mining, achieving stable support for roadways along with long service life is critical and the complex geological environment at such depths frequently presents a major challenge. Owing to the coupling action of multiple factors such as deep high stress, adjacent faults, cross-layer design, weak lithology, broken surrounding rock, variable cross-sections, wide sections up to 9.9 m, and clusters of nearby chambers, there was severe deformation and breakdown in the No. 10 intersection of the roadway of large-scale variable cross-section at the − 760 m level in the Nanfeng working area of the Wuyang Coal Mine. As there are insufficient examples in engineering methods pertaining to the geological environment described above, the numerical calculation model was oversimplified and support theory underdeveloped; therefore, it is imperative to develop an effective support system for the stability and sustenance of deep roadways. In this study, a quantitative analysis of the geological environment of the roadway through field observations, borehole peeking, and ground stress testing is carried out to establish the FLAC 3D variable cross-section crossing roadway model. This model is combined with the strain softening constitutive (surrounding rock) and Mohr-Coulomb constitutive (other deep rock formations) models to construct a compression arch mechanical model for deep soft rock, based on the quadratic parabolic Mohr criterion. An integrated control technology of bolting and grouting that is mainly composed of a high-strength hollow grouting cable bolt equipped with modified cement grouting materials and a high-elongation cable bolt is developed by analyzing the strengthening properties of the surrounding rock before and after bolting, based on the Heok-Brown criterion. As a result of on-site practice, the following conclusions are drawn: (1) The plastic zone of the roof of the cross roadway is approximately 6 m deep in this environment, the tectonic stress is nearly 30 MPa, and the surrounding rock is severely fractured. (2) The deformation of the roadway progressively increases from small to large cross-sections, almost doubling at the largest cross-section. The plastic zone is concentrated at the top plate and shoulder and decreases progressively from the two sides to the bottom corner. The range of stress concentration at the sides of the intersection roadway close to the passageway is wider and higher. (3) The 7 m-thick reinforced compression arch constructed under the strengthening support scheme has a bearing capacity enhanced by 1.8 to 2.3 times and increase in thickness of the bearing structure by 1.76 times as compared to the original scheme. (4) The increase in the mechanical parameters c and φ of the surrounding rock after anchoring causes a significant increase in σ c and σ t ; the pulling force of the cable bolt beneath the new grouting material is more than twice that of ordinary cement grout, and according to the test, the supporting stress field shows that the 7.24 m surrounding rock is compacted and strengthened in addition to providing a strong foundation for the bolt (cable). On-site monitoring shows that the 60-day convergence is less than 30 mm, indicating that the stability control of the roadway is successful.

Failure and stability analysis of deep soft rock roadways based on true triaxial geomechanical model tests

True 3D geomechanical model test for research on rheological deformation and failure characteristics of deep soft rock roadways

Study on the Bolt-mesh-anchor Surrounding Mechanism of a Roadway in a Soft and Thick Rock Seam

3D Geomechanical Model Tests on Asymmetric Reinforcement and Overall Stability Relating to the Jinping I Super-High Arch Dam

Research on Soft Rock Damage Softening Model and Roadway Deformation and Failure Characteristics

Physical model test and numerical simulation on the failure mechanism of the roadway in layered soft rocks

Model test on failure mechanisms of deep high-stress soft rock roadways based on excavation compensation method

Physical modeling investigation on deformation characteristic and roof instability mechanism of deep rectangular roadway in layered rock mass

Deformation characteristics and failure evolution in deep high-stress roadways under creep action

A New Method for Intuitively Reflecting the Deterioration Characteristics of the Rock Surrounding Roadways and Its Application Based on the Strain Softening Model

Study on the failure mechanism of deep roadways considering gradient stress and the control technology of CFST supports

Deformation Mechanism and Support Technology of Deep and High-Stress Soft Rock Roadway

Elastoplastic analysis on deformation and failure characteristics of surrounding rock of soft-coal roadway based on true triaxial loading and unloading tests

Research on Deformation and Failure Mechanism of Surrounding Rock in Inclined Strata with Soft–Hard Interbedded Roadways

Asymmetric failure behavior of surrounding rock in the deep roadway: A semi-analytical solution

Study on failure mechanism of deep soft rock roadway and high prestress compensation support countermeasure

Failure analysis and control technology of intersections of large-scale variable cross-section roadways in deep soft rock

Study on Failure Mechanism and Control Technology of Roadway Surrounding Rock under Complex Occurrence Coal Seam

Study on the Failure Mechanism for Coal Roadway Stability in Jointed Rock Mass Due to the Excavation Unloading Effect

Failure Analysis of Intersections of Large-Scale Variable Cross-Section Roadways in Deep Soft Rock and Study of Integrated Control Technology of Bolting and Grouting

Failure mechanism and control technology of soft-rock roadways subjected to high structural stress