Abstract:Abstract In deep underground mining, achieving stable support for roadways along with long service life is critical and the complex geological environment at such depths frequently presents a major challenge. Owing to the coupling action of multiple factors such as deep high stress, adjacent faults, cross-layer design, weak lithology, broken surrounding rock, variable cross-sections, wide sections up to 9.9 m, and clusters of nearby chambers, there was severe deformation and breakdown in the No. 10 intersection of the roadway of large-scale variable cross-section at the − 760 m level in the Nanfeng working area of the Wuyang Coal Mine. As there are insufficient examples in engineering methods pertaining to the geological environment described above, the numerical calculation model was oversimplified and support theory underdeveloped; therefore, it is imperative to develop an effective support system for the stability and sustenance of deep roadways. In this study, a quantitative analysis of the geological environment of the roadway through field observations, borehole peeking, and ground stress testing is carried out to establish the FLAC 3D variable cross-section crossing roadway model. This model is combined with the strain softening constitutive (surrounding rock) and Mohr-Coulomb constitutive (other deep rock formations) models to construct a compression arch mechanical model for deep soft rock, based on the quadratic parabolic Mohr criterion. An integrated control technology of bolting and grouting that is mainly composed of a high-strength hollow grouting cable bolt equipped with modified cement grouting materials and a high-elongation cable bolt is developed by analyzing the strengthening properties of the surrounding rock before and after bolting, based on the Heok-Brown criterion. As a result of on-site practice, the following conclusions are drawn: (1) The plastic zone of the roof of the cross roadway is approximately 6 m deep in this environment, the tectonic stress is nearly 30 MPa, and the surrounding rock is severely fractured. (2) The deformation of the roadway progressively increases from small to large cross-sections, almost doubling at the largest cross-section. The plastic zone is concentrated at the top plate and shoulder and decreases progressively from the two sides to the bottom corner. The range of stress concentration at the sides of the intersection roadway close to the passageway is wider and higher. (3) The 7 m-thick reinforced compression arch constructed under the strengthening support scheme has a bearing capacity enhanced by 1.8 to 2.3 times and increase in thickness of the bearing structure by 1.76 times as compared to the original scheme. (4) The increase in the mechanical parameters c and φ of the surrounding rock after anchoring causes a significant increase in σ c and σ t ; the pulling force of the cable bolt beneath the new grouting material is more than twice that of ordinary cement grout, and according to the test, the supporting stress field shows that the 7.24 m surrounding rock is compacted and strengthened in addition to providing a strong foundation for the bolt (cable). On-site monitoring shows that the 60-day convergence is less than 30 mm, indicating that the stability control of the roadway is successful.

Study on the failure mechanism of deep roadways considering gradient stress and the control technology of CFST supports

Gradient Failure Mechanism and Control Technology of Deep Roadways under the Action of Deviatoric Stress Field

Deformation failure mechanism and concrete-filled steel tubular support control technology of deep high-stress fractured roadway

Research on application of annular concrete-filled steel tube support in deep roadway

Study on failure mechanism of deep soft rock roadway and high prestress compensation support countermeasure

Model test on failure mechanisms of deep high-stress soft rock roadways based on excavation compensation method

Deformation Mechanism and Support Technology of Deep and High-Stress Soft Rock Roadway

Failure and stability analysis of deep soft rock roadways based on true triaxial geomechanical model tests

Failure analysis and control technology of intersections of large-scale variable cross-section roadways in deep soft rock

Study on the Evolution Law of Deep Rock Cracks and the Mechanism of Graded Gradient Support

Failure Analysis of Intersections of Large-Scale Variable Cross-Section Roadways in Deep Soft Rock and Study of Integrated Control Technology of Bolting and Grouting

Study on Mechanical Properties and Control Technology of Surrounding Rock in the Fracture Zone of a Roadway

Application of concrete-filled steel tubular support in unified strength-bearing ring theory

Failure mechanisms and reinforcement support of roadway in deep coal seam: A case study

Study on Safety Control of Large-Section Roadway with High Stress and Broken Surrounding Rock

Study on failure mechanism and control of surrounding rock of inclined strata crossing roadway in deep coal mine

Failure Mechanisms and Reinforcement Support of Soft Rock Roadway in Deep Extra-Thick Coal Seam: A Case Study

Study on Failure Mechanism and Control Technology of Roadway Surrounding Rock under Complex Occurrence Coal Seam

Failure Mechanism Analysis and Support Technology for Roadway Tunnel in Fault Fracture Zone: A Case Study

Deformation characteristics and failure evolution in deep high-stress roadways under creep action

3D Geomechanical Model Tests on Asymmetric Reinforcement and Overall Stability Relating to the Jinping I Super-High Arch Dam