Abstract:Ti2AlNb-based alloys are developed from conventional titanium aluminides (TiAl-based alloys and Ti3Al-based alloys). Comparing with TiAl and Ti3Al-based alloys, Ti2AlNb-based alloys have better mechanical properties of strength density ratio, high temperature fracture toughness and creep resistance. It is expected to replace traditional high temperature materials such as nickel-based alloys for the manufacture of aero-engine components. Laser shock peening (LSP) is an advanced surface modification technology which induces high amplitude, large depth residual compressive stress on the surface of materials. It can effectively enhance mechanical properties of material such as micro-hardness, fatigue resistance, high temperature oxidation performance. Compared to other surface modification technologies such as shot peening and rolling, LSP can not only induce deeper compress residual stress (1-2 mm), which is about five to ten times dwms than that of shot peening, but it can refine the grain or even form nanocrystals which plays a significant role in enhancing properties of material. For these reasons, this surface treatment technology has been widely used in the aircraft and nuclear energy industries. In this paper, the surface modification of Ti2AlNb alloy was carried out by laser shock peening, and the microstructure evolution, residual stress and the performance at high temperature were investigated. The results show that laser shock peening can significantly reduce the grain size of the surface of Ti2AlNb alloy. Dislocation lines, dislocation tangles and dislocation walls were generated after LSP. The micro-hardness is increased from 350 ITV to 395 HV and the effect layer is about 1.2 mm. The residual compressive stress of -337 MPa is generated on the surface of the sample. In addition, residual stress is released obviously at high temperature. The residual stress on the surface of sample reduces to -65 MPa after heat treatment at 720 degrees C for 4 h. The residual stress is almost completely released after heat treatment at 720 degrees C for 10 h. However, the release rate of residual stress is slowed down at 600 degrees C. The effect of laser shock peening is still presence after heat treatment for 100 h.

Laser shock peening of AlCoCrCuFeNi high-entropy alloy fabricated by laser powder bed fusion: An enhanced oxidation-resistance mechanism at high-temperature

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Improvement in Oxidation Resistance of Ti2AlNb Alloys at High Temperatures by Laser Shock Peening

The role of annealing heat treatment in high-temperature oxidation resistance of laser powder bed fused Ti6Al4V alloy subjected to massive laser shock peening treatment

Strengthening CrFeCoNiMn0.75Cu0.25 high entropy alloy via laser shock peening

Gradient structured high-entropy alloy with high hardness and corrosion resistance after laser shock peening

Achieving excellent wear and corrosion properties in laser additive manufactured CrMnFeCoNi high-entropy alloy by laser shock peening

A study on the wear and corrosion resistance of high-entropy alloy treated with laser shock peening and PVD coating

Thermally Controlled Laser Shock Peening of High-Entropy Alloy with Hybrid Nanostructures and Stabilized Mechanical Properties

Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy

Heat Treatment Induced Microstructural Evolution and Strength Enhancement of Al-Cr-Fe-Ni-V High-Entropy Alloy Fabricated by Laser Powder Bed Fusion

Effect of Laser Shock Peening on Corrosion Behaviors of Ultra-High Strength Al-Zn-Mg-Cu Alloys Prepared by Spray Forming and Ingot Metallurgy

Achieving High Strength and Ductility of Al-Zn-Mg-Cu Alloys Via Laser Shock Peening and Spray Forming

Laser additively manufacturing of Al0.5CoCrFeNiTi0.5 high-entropy alloys with increased resistances to corrosion 3.5% NaCl and oxidation at 1000 °C

Effect of Laser Shock Peening on Microstructure and Residual Stress of Ti2AlNb Alloy

Thermal fatigue crack growth behavior of ZCuAl10Fe3Mn2 alloy strengthened by laser shock processing

High temperature oxidation enhanced by laser remelted of CoCrFeNiAlx (x = 0.1, 0.5 and 1) high-entropy alloys

High temperature oxidation resistance of arc ion plating NiCoCrAlY coating modified via laser shock peening

Laser additive manufacturing of CrMnFeCoNi high entropy alloy: Microstructural evolution, high-temperature oxidation behavior and mechanism

Effect of laser shock peening without coating on fretting wear behavior of GH4169 superalloy at high-temperature

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening