Abstract:This paper presents an analytical investigation of the impact response and failure mechanisms of reinforced concrete (RC) beams—including both bending- and shear-type beams reinforced with carbon fiber-reinforced polymer (CFRP) grids and polymer cement mortar (PCM)—under single and repeated impact loads. A simplified smoothed particle hydrodynamics (SPH) method was used for the simulation, incorporating a virtual particle concept to model the debonding of the strengthening layers. Compared to the experimental results, the simulation method accurately predicted the response of the bending-failure-type beams with an average error margin of 7%. However, concerning shear failure beams, the simulation accuracy is significantly influenced by the adhesion model between the concrete and steel bars. The findings indicate that different impact velocities alter the crack propagation under repeated impact conditions, with two distinct failure modes observed: CFRP rupture in the high-flexibility grids and debonding in the low-flexibility grids. Nonetheless, if no debonding occurred, the strengthening layer reduced the displacement and crack development in bending-failure beams by 20% while having no effect on shear-failure beams. A parametric study conducted to assess the key parameters affecting strengthening effectiveness, emphasizing the importance of optimizing the PCM layer to enhance reinforcement while minimizing debonding risks, revealed that an excessively high PCM strength and thickness did not yield significant improvements and increased the risk of debonding. Additionally, lower-flexibility CFRP grids increased the occurrence of debonding, particularly in thicker grid layers, whereas thinner grids provided a more effective strengthening solution, highlighting the influence of grid flexibility on failure mechanisms.

Investigation on the shear behavior of RC beams strengthened with BFRP grids and PCM

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Investigation on Flexural Performance of RC Beams Flexurally Strengthened by Side-bonded CFRP Laminates

Experimental investigation and numerical analysis of RC beams shear strengthened with FRP/ECC composite layer

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

Fatigue performance of RC beams strengthened with non-prestressed and prestressed BFRP grids

Shear Behaviour of RC Beams Strengthened using CFRP Grid-ECC/PMM Matrix Composites: An Experimental and Numerical Investigation

Numerical analysis of reinforced concrete beams enhanced in shear with external polymer cement mortar‐bonded FRP grid

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Experimental study on flexural shear strengthening effect on low-strength RC beams by using FRP grid and ECC

Study of the Mechanical Performance of Grid-Reinforced Concrete Beams with Basalt Fiber-Reinforced Polymers

Experimental study and analysis of RC beams shear strengthened with FRP/SMA composites

Experimental investigation on shear performance of RC T-beams strengthened with hybrid bonded CFRP strips

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Investigation On Flexural Behavior Of Reinforced Concrete Beams Flexurally Strengthened By Different Methods

Strengthening RC Beams with Mid-Span Supporting Prestressed CFRP Plates: an Experimental Investigation

RESEARCH ON FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED WITH BASALT FIBER REINFORCED POLYMER

Shear Strengthening of Reinforced Concrete Beams Using Geopolymer-Bonded Small-Diameter FRP Bars

Impact Response in Flexural Strengthening of Reinforced Concrete Beams with CFRP Grid and PCM

Experimental investigation of corrosion-damaged RC beams strengthened in flexure with FRP grid-reinforced ECC matrix composites