Abstract:As an alternative method to the homogeneous minor actinide (MA) recycling in fast breeder reactors, a heterogeneous MA loading core concept using a highly concentrated americium (Am)-containing fuel (Am target) is proposed. By the use of an extraction process for Am and curium (Cm) in the reprocessing of the spent fuel, Am (and a small amount of Cm) can be recovered and then concentrated to produce the target. The Am content in the heavy metal is assumed to range from 10 to 20 wt% in accordance with the target development scope. A mixed oxide fuel that contains uranium, plutonium, and neptunium is chosen as the base material of the target, so that the targets can generate a level of power equivalent to that of the driver fuels. It was found that a ring-shaped arrangement of Am targets between the inner and outer core regions exhibits a favorable MA transmutation performance without any significant deterioration in the core neutronic characteristics, including increases of the burnup reactivity and sodium void reactivity worth, and decreases of the breeding ratio and absolute value of the Doppler coefficient, etc., in comparison with those of a reference homogeneous MA loading case. It should be noted that the Am targets in this loading arrangement can contribute to the suppression of the core power distribution change along with burnup. A series of core designs, including core neutronics, thermal hydraulics, and fuel integrity evaluations, was also carried out for a representative Am target loading case. The results indicate that it is possible to design an Am target subassembly that can cope with the issues presented by highly concentrated Am, i.e., the deterioration of thermophysical properties and the accumulation of helium gas inside the target fuel pins. Therefore, the design feasibility of the heterogeneous target loading core has been enhanced.

Transport of Fresh Mox Fuel Assemblies for the Monju Initial Core

RADIATION SAFETY EVALUATION OF A TRANSPORT CONTAINER DURING CARTING SPENT NITRIDE URANIUM-PLUTONIUM FUEL OF BN-600 USING THE MCU-FR CODE

1 IAEA-CN-245-405 THE BN-800 CORE WITH MOX FUEL

Experiments on Central Reaction Rate Ratios and Fission Distributions in the FCA-XXII-1 Assembly Simulating Highly Enriched MOX–Fueled Tight Lattice LWR Cores

Design and dynamic analysis of transport cask for SMR fresh fuel assembly

Experiments on Criticality and Reactivity Worths in the FCA-XXII-1 Assembly Simulating Highly Enriched MOX Fueled Tight Lattice LWR Cores

Evaluation of Reaction Rate Distribution Measurement in the Prototype Fast Reactor Monju

EBR-II MOX Fuel Characterization Enabling ARES Phase I Testing

Feasibility Study on the Analysis of MOX Particle Behavior

Evaluation of Reaction Rate Distribution for Shielding Region in the Prototype Fast Reactor Monju

Transmutation Study of Minor Actinides in Mixed Oxide Fueled Typical Pressurized Water Reactor Assembly

Pie of the 2 irradiation test (komo-2) for the atomized u- mo dispersion rod fuels at kaeri

Gamma and neutron detector performance in a MOX fuel fabrication plant environment

Transmutation of Minor Actinides and Power Flattening in PWR MOX Fuel

Development of Safety-Enhanced Fast Reactor by Using Minor Actinide Bearing Internal Blanket

Thermo-mechanical Behavior Simulation Coupled with the Hydrostatic-Pressure-dependent Grain-Scale Fission Gas Swelling Calculation for a Monolithic UMo Fuel Plate under Heterogeneous Neutron Irradiation

Study of Minor Actinides Transmutation in PWR MOX fuel

Fast breeder reactor core concept for heterogeneous minor actinide loading

A safety enhanced sodium-cooled MOX fueled fast reactor core concept

Neutronic Design and Evaluation of the Solid Microencapsulated Fuel in LWR

Containment Integrity and Sealing Assessment for HTR-PM600 Fresh Fuel Transport Package Under Impact Loading