Abstract:In this technical note, an innovative thorium-uranium-fueled fusion-fission hybrid reactor (FFHR) design that employs a dual-coolant system to enhance U-233 breeding and is based on a three-dimensional engineering model is presented. The reactor consists of two kinds of modules: a water-cooled, thermal spectrum power generation natural uranium-fueled module and helium-cooled, fast spectrum fissile-breeding natural thorium-fueled modules, which are arranged alternately in the poloidal direction of the blanket. An interesting and important neutronic characteristic of the FFHR is found in this technical note: Energy multiplication is primarily determined by the uranium module parameters and is almost independent of the thorium module parameter. Uranium module design should first consider improving energy production. The Th-232 neutron capture rate is primarily determined by the thorium module parameters. The uranium module parameter has almost no influence on the Th-232 neutron capture rate in the thorium module. The uranium and thorium modules have weak coupling in neutronic behavior. However, with the fixed design parameters of the uranium and thorium modules, the most important influencing factor on energy multiplication factor M (the ratio of total blanket energy output and the fusion energy) and the U-233 breeding rate is the fraction of the external fusion neutron source irradiated on the uranium or thorium module or the blanket coverage rate of the uranium or thorium modules. Based on this characteristic, an innovative hybrid reactor design that employs a dual-coolant system is proposed in this technical note. Uranium modules still use water as the coolant to maintain a high energy multiplication factor, whereas helium is used as the coolant for the thorium module to obtain a fast neutron spectrum to enhance the U-233 breeding. The simulation results show that the helium-cooled thorium module is 2.5 times more efficient in U-233 breeding compared to the original water-cooled thorium module design. Approximately 10 tons of U-233 is produced after 20 years of operation for the helium-cooled thorium module design.

Comparative Evaluations of Nuclear Fuel Breeding Rate in Hybrid Fission-Fusion Reactor with U and Th

Neutronic Analysis of a Thorium-Uranium Fueled Water Cooled Fusion-Fission Hybrid Blanket

Possibility assessment for production of non-traditional nuclear fuel in thorium blanket of hybrid thermonuclear reactor

High Breeding Core of a Supercritical-Pressure Light Water Cooled Fast Reactor

Neutronic Study of an Innovative Thorium-Uranium–Based Fusion-Fission Hybrid Energy Reactor with 233U Breeding Enhancement by Using Dual-Coolant System

Physical aspects for involvement of thermonuclear reactors into nuclear power systems

Neutronics Analyzation of Helium Cooled Solid Breeder Blanket in a Fusion Reactor

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Burn Up Study of an Innovative Natural Uranium-Thorium Fueled Reprocessing Free Fusion-Fission Hybrid Reactor Blanket with Closed Thorium-Uranium Fuel Cycle

Study on Fission Blanket Fuel Cycling of a Fusion–fission Hybrid Energy Generation System

Neutronic Study of a Combined Fast Fission FFHR and Thermal Fission FFHR System Using Thorium Bearing Molten Salt Fuel

233 U Breeding in Accelerator Sub-Critical Fast Reactor

Neutron Physical Characteristics of Light Water Cooled Blanket of Fusion-Fission Hybrid Reactor

Neutronics Calculations of Performance Enhancement of the Lithium-Uranium Blanket of a Tokamak Reactor

Neutronics Comparison Analysis of the Water Cooled Ceramics Breeding Blanket for CFETR

Production of Pa-U Fuel with Proliferation Resistance by 14 MeV Neutron for Long-life Core

Neutronic study of an innovative natural uranium–thorium based fusion–fission hybrid energy system

Study of Thorium–uranium Based Molten Salt Blanket in a Fusion–fission Hybrid Reactor

Feasibility of Converting NuScale SMRs from UO2 to Mixed (Pu,Th)O2 and (U,Th)O2 Cores: A Parametric Study of the Seed-Blanket Fuel Assembly

Neutronics Design Optimization on Cross Cooled Solid Blanket of Fusion Reactor

An Approach to Increase the Fusion Tritium Breeding Ratio Using Temperature Field Balance Based on Water-Cooled Ceramic Blanket