Abstract:PP/PA6 alloy was compatibilizing modified by blending with different graft PP of PP-g-MAH and PP-g-GMA separately and together.The morphology of the modified alloy was analysized by means of SEM and the mechanical properties of the alloy were tested.The results showed when only PP-g-MAH was applied to the modification,the mechanical properties of the alloy increased first,and then decreased,and compared to those of the alloy blended with no graft PP,the tensile strength,bending strength and notched impact strength of the modified alloy increased by 20%,54%,and 3.6% respectively.The effect of PP-g-MAH on the mechanical properties of the alloy of different PP/PA6 blending ratio was different.When the mass fraction of PP-g-MAH was fixed to be 4%,and that of PA6 30%,the mechanical properties of the alloy were the best.The modification of the alloy by the mixture of PP-g-MAH and PP-g-GMA was better than that by PP-g-MAH or PP-g-GMA only,the tensile strength,bending strength and notched impact strength of the modified alloy were improved obviously.The SEM micrographs showed the graft PP improved the compatibility of PP/PA6 alloy,the dimension of PA6 minished and even after the addition of graft PP,the contact surface of PP and PA6 turned fuzzy from clear.So the graft PP was an effective compatibilizer for PP/PA6 alloy.

Graft PP Compatibilizing Modification of PP/PA6 Alloy

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

THE STUDY OF APPLIED BEHAVIOR OF PP/PA6 BY USING GRAFTED POLYPROPYLENE AS COMPATILIZER

Study on Compatibilization of New Melt Graft Copolymer on PP／PA6 Blend

Compatibilization Effect of PP-g-(MAH/VAc) on Polypropylene/Polyamide 6 Blends

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Compatibilizing Modification and Mechanism of PP/WF Composites

Morphology, thermal behavior, and mechanical properties of nylon6/multi-monomer grafted polypropylene blends

Effect of Maleic‐anhydride‐grafted Polypropylene As a Compatibilizer on the Properties of Polypropylene/(modified Carbon Black) Composites

Compatibility and Low Temperature Impact Property of PP/PP-g-PA6/PA6 Blends

Functionalization of Polypropylene and Compatibilization of Polypropylene/Nylon 6 Blends with Copolymers Containing Alpha-Methyl Styrene Units

Effect of Different Comonomers Added to Graft Copolymers on the Properties of PLA/PPC/PLA-g-GMA Blends

Reactive Compatibilization of Poly(Phenylene Oxide)/Polyamide 6 Blended with Poly(Phenylene Oxide) Grafted Glycidyl Methacrylate Copolymer

Study on the Microstructures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends

A study on the compatibilization of graft-polypropylene used to polypropylene filled with hydroxyapatite

Preparation and Study on PP/PA6 Composites with High Modulus and Strength

Modification of the Grafting Character to Prepare PA6/ABS-g-MA Blends with Higher Toughness and Stiffness

Synthesis of multifunctional polypropylene via solid phase cografting and its grafting mechanism

Fractal analysis on compatibilization of PP-g-MAH in PP/PA 6 blending system

Effect of Compatibilizer on the Structure and Property of Polycarbonate/polypropylene Alloys

Effect of Co-Monomer on the Adhesive Performance of PP-g-MAH Between Cast Polypropylene Film and Aluminum Foil