Abstract:Abstract A stable and reliable pump-turbine operation under continuously expanding operating range requirement often imposes challenges on the hydraulic design of the pump-turbines and requires new developments. During a previous study carried out at the HSLU (Lucerne University of Applied Sciences, Switzerland), the flow instabilities of a low specific speed (i.e., nq = 25) pump-turbine were analyzed while a CFD methodology was developed through taking different numerical approaches and applying several turbulence models. The goal was to predict the turbine-mode characteristics of the reversible pump-turbines in the S-shaped region (at speed no load conditions) accurately as well as analyzing the flow features especially at off-design conditions. This CFD model was validated against the experimental data at different guide vane openings in turbine operating mode. Based on the analysis of the experimental data, flow visualization, and CFD results focusing especially on the flow features in the vaneless space and at the runner inlet, the onset and development of the flow instabilities were explored. Furthermore, a flow control technology that entailed injecting air and water in the vaneless space of a model pump-turbine was implemented for suppressing the flow instabilities and thus extending the operating range of the pump-turbine. Both air- and water-injection were applied by using an external energy source (compressor and pump) and discrete nozzles that are distributed in the vaneless space circumferentially. The S-shaped pump-turbine characteristics in turbine operating mode were modified so that the slope at speed no load conditions was no more positive indicating an improvement in the stability behavior. The analysis of the unsteady pressure data indicates the suppression of flow instability such as rotating stall with fluid injection in the vaneless space. The positive effect of fluid injection on the pump-turbine characteristics was also demonstrated in the CFD calculations. CFD was able to predict the pump-turbine dimensionless discharge, Kcm1, - speed, Ku1, characteristic curve with water injection correctly. After the CFD tool is validated for the prediction of the pump-turbine characteristics with fluid injection, further CFD simulations were carried out in order to improve the effectiveness of flow control and if possible, using less amount of injected fluid in the vaneless space. The goal was to optimize the fluid injection so that the instabilities can be suppressed with the lowest possible water/energy consumption. Parameters such as number of injection nozzles, nozzle position, nozzle diameter, and injection direction are varied. Several configurations of water injection system i.e., changing the number, location, and distribution of injection nozzles circumferentially and radially, direction of flow injection with respect to the main flow in the vaneless space, symmetrical and asymmetrical circumferential distribution of the nozzles in the vaneless space were analyzed using the CFD simulations. In addition to the flow injection in the vaneless space from the hub wall, fluid injection through the guide vanes was also investigated. The results of the fluid injection modifications were compared with the results of the baseline flow injection case. Using a parameter study, optimal nozzle configurations were found, that resulted in stable pump-turbine behavior in turbine operating mode with fewer injection nozzles and lower injected flow rate in comparison to the baseline case.

Mitigating surface vortex formation in pump sump intakes through anti-vortex devices: a comprehensive CFD study

Suppressing submerged vortices in a closed pump sump: A novel approach using joint anti-vortex devices

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Energy Contribution Study of Blade Cavitation Control by Obstacles in A Waterjet Pump Based on Mpod and EEMD

Optimization of a Centrifugal Impeller on Blade Thickness Distribution to Reduce Hydro-Induced Vibration

Optimization of the Outlet Unloading Structure to Prevent Gaseous Cavitation in a High-Pressure Axial Piston Pump

Computational Fluid Dynamics-Based Pump Redesign to Improve Efficiency and Decrease Unsteady Radial Forces

A Performance Test and Internal Flow Field Simulation of a Vortex Pump

Blade Redesign Based on Secondary Flow Suppression to Improve Energy Efficiency of a Centrifugal Pump

Investigation of the impact of splitter blades on a low specific speed pump for fluid-induced vibration

Enhancing the Performance of Centrifugal Pump by Adding Cylindrical Disks at Inlet Suction

Improvements of Flow Control With Fluid Injection for the Suppression of Flow Instabilities in Pump-Turbines

Study of the Cavitation Phenomenon Inside Roller Vane Pump

STUDY ON THE REDUCTION OF PRESSURE FLUCTUATION FOR A DOUBLE-SUCTION CENTRIFUGAL PUMP WITH STAGGERED BLADES

Design Method of Water Jet Pump Towards High Cavitation Performances

Quantitative Analysis of Energy Loss and Vibration Performance in a Circulating Axial Pump

High Efficiency and Low Pressure Fluctuation Redesign of A Centrifugal Pump Based on Unsteady Cfd Analyses

Numerical Simulation and Experimental Study on an Innovative Vortex Eliminator Using a Modified SST Turbulence Model for Gas-Liquid Two-Phase Flow

Improving the Modeling of Pressure Pulsation and Cavitation Prediction in a Double-Volute Double-Suction Pump Using Mosaic Meshing Technology

Numerical prediction of the influence of free surface vortex air-entrainment on pump unit performance

Study on the Cavitation Suppression Mechanism of Axial Piston Pump