Abstract:Abstract Steam turbines are applied in production plants characterized by very large injections of steam. For this reason, the design and optimization of the admission are fundamentals to obtain an adequate level of turbine efficiency and ensure uniform flow at the inlet of the low pressure stages downstream the injection. In conjunction with a flexible operation and partial load conditions, it is important to estimate the losses appearing at those admissions sufficiently. The aerodynamic performance and flow field of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes were experimentally measured and numerically simulated in this paper. The total pressure loss, outlet flow angle and mass flow rate of the individual tangential admission volute at three different outlet Mach numbers and tangential admission volute coupled with the downstream vanes at four different inlet total pressures were measured. The flow field of the experimental tangential admission volute for the steam turbine was numerically investigated using threedimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulence model. The numerical aerodynamic parameters of the tangential admission volute were in good agreement with the experimental data. The accuracy of the presented numerical method was validated. The flow field and aerodynamic parameters of tangential admission volute coupled with the downstream vanes were discussed under different inlet total pressure flow conditions. Then, three volute cases with different transverse distance were designed to investigate the influence of different outlet airflow angles on the aerodynamic performance of the downstream vanes. Results show that the outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes usually keep constants when the inlet total pressure is increases. The averaged outlet airflow angle of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes equal 152.0° and 166.6°, respectively. Comparing with the individual tangential admission volute, the outlet airflow angle of the tangential admission volute coupled with the downstream vanes is more uniform. The total pressure loss and mass flow rate of the individual tangential admission volute and tangential admission volute coupled with the downstream vanes increase with the inlet total pressure. With the increase of the inlet total pressure, the total pressure loss coefficient of the individual tangential admission volute increases from 0.73% to 1.64%. In the same case, the total pressure loss of the tangential admission volute coupled with the downstream stator vane increases from 0.82% to 2.66%. The average airflow angle of the volute increases with the increase of the transverse distance. With the increase of the transverse distance, the total pressure loss coefficient of the volute increases and the total pressure loss coefficient of the vanes decreases. At the same time, the total pressure loss coefficient of the whole model decreases at first and then increases. The present work provides the reference for the design and performance analysis of the tangential admission volute for the steam turbines.

Numerical Simulation and Experimental Study on an Innovative Vortex Eliminator Using a Modified SST Turbulence Model for Gas-Liquid Two-Phase Flow

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

A Performance Test and Internal Flow Field Simulation of a Vortex Pump

Multi-objective optimization of a novel vortex finder for performance improvement of cyclone separator

Efficient Design Method for Applying Vortex Generators in Turbomachinery

Study on Flow Characteristics of a Turbulent Boundary Layer and Vortex Structure of High Pressure Guide Vanes in SCO 2 Turbines

Numerical Simulation of Radial Duel-Stage Nozzle Vortex Cooling at the Leading Edge of a Gas Turbine Blade

Parametric optimization of vortex generator configuration for flow control in an intake duct for waterjet propulsion

Experimental and Numerical Investigation of a Novel Vortex Reducer in a Co-Rotating Cavity of Aeroengines

Numerical and Experimental Study of Vortex Structure and Energy Loss in a Novel Self-Priming Pump

Numerical analysis of vortex and cavitation dynamics of an axial-flow pump

Numerical Analysis of the Effect of Misaligned Guide Vanes on Improving S-Shaped Characteristics for a Pump-Turbine

Numerical Investigations Of Flow Separation Control For A Low Pressure Turbine Blade Using Steady And Pulsed Vortex Generator Jets

Vortex Patterns Investigation and Enstrophy Analysis in a Small Scale S-CO2 Axial Turbine

Numerical Study On Effects Of Jet Nozzle Angle And Number On Vortex Cooling Behavior For Gas Turbine Blade Leading Edge

Efficient Optimization Design of Vortex Generators in a Highly Loaded Compressor Stator

Suppressing submerged vortices in a closed pump sump: A novel approach using joint anti-vortex devices

Effects of the Swirling Coolant Jet from the Upstream Slot on the Vane Endwall Cooling and the Vane Suction Side Phantom Cooling

Experimental Measurements and Numerical Investigations on the Aerodynamic Performance and Internal Flow Fields of Tangential Admission Volutes for Steam Turbines

Numerical Study of Combining Steady Vortex Generator Jets and Deflected Trailing Edge to Reduce the Blade Numbers of Low Pressure Turbine Stage

Numerical Analysis of Misaligned Guide Vanes Effect Pressure Oscillations in a Prototype Pump Turbine