Abstract:In this paper, the fretting wear behaviour of steel wires working in coal mining technology is studied numerically. In past studies, the fretting process of steel wires was carried out numerically considering that the coefficient of friction (COF) and wear coefficient (WC) are constant parameters. However, it has been noticed experimentally that COF increases up to a certain number of fretting cycles and then becomes constant, i.e. a steady-state stage, depending on the loading conditions. This increase in COF during the fretting process is also known as the running-up stage. The fretting wear model is modified to evaluate the influence of the varying coefficient of friction (VCOF), which is associated with the variable wear coefficient (VWC), so the influence of VWC is also considered. The subroutine UMESHMOTION used to implement the wear law is also modified to study the effect of VCOF and VWC. Therefore, in this study, the numerical results of a three-dimensional finite element (FE) model are compared, with analytical results of contact area and contact stresses, and with experimental results of peak wear depth. After validating the FE model, the wear scar, the increasing wear depth, wear volume, and the decreasing contact stress with increasing fretting cycles are determined numerically considering VCOF and VWC using cycle jump approach. The energy dissipation effect of frictional force and fretting amplitude is also studied for varying interaction properties of fretting wear models. The numerical simulations are performed by considering both elastic and plastic material properties to analyse the influence of varying interaction properties on fretting wear models at the running-up stage. The results indicate that the VWC model exhibits comparable impacts on both the elastic and plastic models. The results also show that the VWC fretting wear model leads to higher wear scar, wear volume, and wear depth values at the running-up stage as well as at the steady state stage, which are close to the experimental data.

Influence of different mineral particles in lubricating grease on the fretting behavior between steel wires under different contact forms

Fretting behavior evolution of steel wires with helical structure after adding ore particles in lubricating grease

Influence of grease containing mineral particles on friction and wear characteristics between spiral wires inside wire rope

Friction and wear behavior of multiple steel wires with different corrosion extents under different lubrication conditions

Friction and wear of multiple steel wires in a wire rope

A Comparative Investigation of the Tribological Behavior and Wear Mechanism of Bronze-graphite Composite under Dry- and Water-lubricated Sliding Against Steel

Fretting tribological behaviors of steel wires under lubricating grease with compound additives of graphene and graphite

Tribological performances of α-Zrp as the additive of the grease used for mine hoisting wire rope

Fretting Behaviors of Steel Wires with Tensile-Torsional Coupling Force Under Different Wire Diameters and Crossing Angles

Influence of different corrosive environments on friction and wear characteristics of lubricated wire ropes in a multi-layer winding system

The Tribological Properties of a Mineral Additive in Lubricating Oil on Steel/Al-Sn Alloy Friction Pair

Fretting Wear Behavior and Strength Degradation of Helical Contact Steel Wire in Wire Rope under Different Corrosive Media and Time-Varying Conditions

Friction and Wear Behavior Between Crane Wire Rope and Pulley under Different Contact Loads

Influence of displacement amplitude on fretting-induced friction and wear of steel in oil-lubricated contact

Influence of Synergistic Effect of Cu Particles and Striated Surface Texture on Tribological Properties

Effect of Natural Attapulgite Powders As Lubrication Additive on the Friction and Wear Performance of A Steel Tribo-Pair

Effect of Texture Parameters on the Tribological Properties of Spheroidal Graphite Cast Iron Groove-Textured Surface under Sand-Containing Oil Lubrication Conditions

Tribological Properties Of Nanometer Al2o3 And Nanometer Zno As Additives In Lithium-Based Grease

Simulation of fretting wear in steel wires under variable coefficient of friction and variable wear coefficient

Friction, wear and residual strength properties of steel wire rope with different corrosion types

Tribological properties and residual strength of wire rope with different strands during the interlayer-transition stage