Abstract:Abstract Conventional manufacturing techniques to fabricate microfluidic chips, such as soft lithography and hot embossing process, have limitations that include difficulty in preparing multiple-layered structures, cost- and labor-consuming fabrication process, and low productivity. Digital light processing (DLP) technology has recently emerged as a cost-efficient microfabrication approach for the 3D printing of microfluidic chips; however, the fabrication resolution for microchannels is still limited to sub-100 microns at best. Here, we developed an innovative DLP printing strategy for high resolution and scalable microchannel fabrication by dosing- and zoning-controlled vat photopolymerization (DZC-VPP). Specifically, we proposed a modified mathematical model to precisely predict the accumulated UV irradiance for resin photopolymerization, thereby providing guidance for the fabrication of microchannels with enhanced resolution. By fine-tuning the printing parameters, including optical irradiance, exposure time, projection region, and step distance, we can precisely tailor the penetration irradiance stemming from the photopolymerization of the neighboring resin layers, thereby preventing channel blockage due to UV overexposure or compromised bonding stability owing to insufficient resin curing. Remarkably, this strategy can allow the preparation of microchannels with cross-sectional dimensions of 20 μm × 20 μm using a commercial printer with a pixel size of 10 μm × 10 μm; this is significantly higher resolution than previous reports. In addition, this method can enable the scalable and biocompatible fabrication of microfluidic drop-maker units that can be used for cell encapsulation. In general, the current DZC-VPP method can enable major advances in precise and scalable microchannel fabrication and represents a significant step forward for widespread applications of microfluidics-based techniques in biomedical fields.

3D printing in microfluidics: experimental optimization of droplet size and generation time through flow focusing, phase, and geometry variation

3D Printing in Microfluidics: Experimental Optimization of Droplet Size and Generation Time through Flow Focusing, Phase, and Geometry Variation

Integration of three-dimensional printing and microfluidics

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

Experimental validation of a simple, low-cost, T-junction droplet generator fabricated through 3D printing

Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review

Immunizations for travelers.

Investigating Mixing Efficiency in Droplets: A Comprehensive Study of Numerical Modeling and Experimental Testing in 3D-Printed Microfluidic Devices

Scalable, Transparent and Micro: 3D Printed Rapid Tooling for Injection Moulded Microfluidics

A 3D printed size-tunable flow-focusing droplet microdevice to produce cell-laden hydrogel microspheres

Three-Dimensional Printed Devices in Droplet Microfluidics

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Emerging 3D printing technologies and methodologies for microfluidic development

[Suitability of spatial pattern of camping sites in Langxiang Natural Reserve, Northeast Chi- na, based on GIS technology].

Characterization and evaluation of 3D printed microfluidic chip for cell processing

Development of a Custom-Made 3D Printing Protocol with Commercial Resins for Manufacturing Microfluidic Devices

Microfluidics-enabled functional 3D printing

Which indicators can public health authorities use to monitor prescription drug abuse and evaluate the impact of regulatory measures? Controlling High Dosage Buprenorphine abuse.

Evaluating Laser‐Based Microfabrication in Microfluidics: An Experimental and Computational Trial

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization