Abstract:Drop-on-demand (DOD) microdroplet formation and deposition play an important role in additive manufacturing, particularly in printing of three-dimensional (3D) in vitro biological models for pharmacological and pathological studies, for tissue engineering and regenerative medicine applications, and for building of cell-integrated microfluidic devices. In development of a DOD based microdroplet deposition process for 3D cell printing, the droplet formation, controlled on-demand deposition and at the single-cell level, and most importantly, maintaining the viability and functionality of the cells during and after the printing are all remaining to be challenged. This report presents our recent study on developing a novel DOD based microdroplet deposition process for 3D printing by utilization of an alternating viscous and inertial force jetting (AVIFJ) mechanism. The results include an analysis of droplet formation mechanism, the system configuration, and experimental study of the effects of process parameters on microdroplet formation. Sodium alginate solutions are used for microdroplet formation and deposition. Key process parameters include actuation signal waveforms, nozzle dimensional features, and solution viscosity. Sizes of formed microdroplets are examined by measuring the droplet diameter and velocity. Results show that by utilizing a nozzle at a 45 μm diameter, the size of the formed microdroplets is in the range of 52–72 μm in diameter and 0.4–2.0 m/s in jetting speed, respectively. Reproducibility of the system is also examined and the results show that the deviation of the formed microdroplet diameter and the droplet deposition accuracy is within 6% and 6.2 μm range, respectively. Experimental results demonstrate a high controllability and precision for the developed DOD microdroplet deposition system with a potential for precise cell printing.

Experimental validation of a simple, low-cost, T-junction droplet generator fabricated through 3D printing

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

3D Printing in Microfluidics: Experimental Optimization of Droplet Size and Generation Time through Flow Focusing, Phase, and Geometry Variation

Investigating Mixing Efficiency in Droplets: A Comprehensive Study of Numerical Modeling and Experimental Testing in 3D-Printed Microfluidic Devices

Three-Dimensional Printed Devices in Droplet Microfluidics

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

A Capillary-Assembled Micro-Device for Monodispersed Small Bubble and Droplet Generation

A Monolithic 3D Printed Axisymmetric Co-Flow Single and Compound Emulsion Generator

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Application of a Micro Free-Flow Electrophoresis 3D Printed Lab-on-a-Chip for Micro-Nanoparticles Analysis

A Versatile Microchannel Array Device for Portable and Parallel Droplet Generation

Fabrication and Demonstration of a 3D-printing/PDMS Integrated Microfluidic Device

A Portable, Negative-Pressure Actuated, Dynamically Tunable Microfluidic Droplet Generator

Three-Dimensional Printing Enabled Droplet Microfluidic Device for Real-Time Monitoring of Single-Cell Viability and Blebbing Activity

A novel abrasive water jet machining technique for rapid fabrication of three-dimensional microfluidic components

3D-printed microfluidic-microwave device for droplet network formation and characterisation

Alternating Force Based Drop-on-Demand Microdroplet Formation and Three-Dimensional Deposition

A 3D printed size-tunable flow-focusing droplet microdevice to produce cell-laden hydrogel microspheres