Abstract:The primary purpose of this study was to evaluate the hydraulic coefficient of coarse aggregate grain size beds and hydraulic parameters under random and perpendicular bed configurations, as well as to explore the discharge coefficient for rectangular weirs. The research objectives were to compare flow resistance coefficients, evaluate the discharge coefficient for rectangular weirs, investigate the relationship between roughness coefficient and hydraulic parameters, and validate the theoretical hydraulic equation for the rectangular weir. This was achieved by analysing different bed configurations, bed slopes, and 20 and 30-mm bed materials. Sieve analysis was conducted on bed materials using American-standard sieves to determine their particle size distribution. The experiment was performed in a rectangular flume measuring 12 m in length, 0.31 m in width, and 0.45 m in depth. In a laboratory experiment, water was pumped into a flume using centrifugal pumps, and a rectangular weir was attached downstream for discharge measurement. The experiment investigated factors such as Manning roughness coefficient, bed material geometry, bed slope, and weir shapes. Approximately 1680 tests were conducted to analysed the impact of these factors on discharge and the coefficient of discharge. The average Manning's roughness coefficients for a grain size of 20 mm were 0.019 (with weir) and 0.019 (without weir) in a random bed configuration, and 0.028 (with weir) and 0.027 (without weir) in a perpendicular flow bed configuration. For a grain size of 30 mm, the coefficients were 0.023 (with weir) and 0.022 (without weir) in a random bed configuration, and 0.033 (with weir) and 0.026 (without weir) in a perpendicular flow bed configuration. The presence of a weir has affected Manning's roughness coefficients and discharge coefficients. With a weir, the roughness coefficients have generally been higher compared to without a weir, indicating increased roughness in the channel. The discharge coefficient for a rectangular weir with a grain size of 20 mm ranged from 0.39 to 0.84 (random bed) and 0.27 to 0.68 (perpendicular flow bed), while for a grain size of 30 mm it ranged from 0.31 to 0.81 (random bed) and 0.23 to 0.48 (perpendicular flow bed). The discharge coefficients have varied depending on the grain size and bed configuration, reflecting different flow efficiencies over the weir. Rough particles influenced flow and Manning's roughness coefficient value, then reduced discharge and velocity values. Under two bed configurations and slopes, beds with a grain size of 30 mm have higher roughness coefficients compared to those with a grain size of 20 mm. The models have shown that the roughness coefficient is inversely proportional to the discharge and directly proportional to the tailgate water levels. The coefficient of roughness and discharge coefficient are mainly influenced by the channel slopes, bed roughness, bed grain size, and bed configuration. A randomly configured bed with a 20 mm grain size gravel bed is preferred over a perpendicular bed configuration to handle high discharges. Using a 20 mm grain-size gravel bed in open-channel flow is more suitable than a 30 mm grain-size bed. Relying on the constant friction factor, Manning's n, is not recommended as it may result in design errors. These findings have the potential to improve hydraulic engineering design practices, enhancing the accuracy and efficiency of open-channel flow systems.

Impact of downstream obstructions on ogee weir efficiency: a regression analysis

Uncertainty analysis of discharge coefficient predicted for rectangular side weir using machine learning methods

Discharge coefficient of vertical sluice gates with broad crested weir under free-submerged orifice flows using best subset regression

Accurate discharge coefficient prediction of streamlined weirs by coupling linear regression and deep convolutional gated recurrent unit

Enhancing Rectangular Side Weir Discharge Prediction Using Stacking Technique

Discharge coefficient estimation of modified semi-cylindrical weirs using machine learning approaches

Unlocking precision in hydraulic engineering: machine learning insights into labyrinth sluice gate discharge coefficients

Regression time-series model for analyzing observational data

A performance comparison of the meta model methods for discharge coefficient prediction of labyrinth weirs

Numerical Modeling of Flow over a Rectangular Broad-Crested Weir with a Sloped Upstream Face

Advanced Hybrid Techniques for Predicting Discharge Coefficients in Ogee-Crested Spillways: Integrating Physical, Numerical, and Machine Learning Models

Analysis of discharge characteristics of a symmetrical stepped labyrinth side weir based on global sensitivity

Application of Machine Learning Models in Predicting Discharge Coefficient of Side B-Type Piano Key Weir

Enhanced Support Vector Machine with Particle Swarm Optimization and Genetic Algorithm for Estimating Discharge Coefficients of Circular-Crested Oblique Weirs

Experimental Study on the Hydraulic Performance of Porous Broad-Crested Weirs with Sloping Crests

A comparison study between CFD analysis and PIV technique for velocity distribution over the Standard Ogee crested spillways

Numerical simulation of flow over ogee crested spillways under high hydraulic head ratio

Statistical accuracy for estimations of large wood blockage in a reservoir environment

Flow through a sluice gate over a broad crested weir under free- and submerged-flow conditions

Acclimatize experimental approach to adjudicate hydraulic coefficients under different bed material configurations and slopes with and without weir

FLOW-3D Model Development for the Analysis of the Flow Characteristics of Downstream Hydraulic Structures