Abstract:Vertical sluice gates are commonly used to control and measure flow in irrigation and drainage networks. To reduce their size and associated maintenance and operation costs, they are sometimes installed above broad-crested weirs. To explore the effects of the installation location of the sluice gate and the sill height on the hydrodynamic characteristics of the flow passing through the sluice-gated weir, six laboratory models were tested. The 427 and 449 data points included both free- and submerged-flow conditions, respectively. Analytical relationships were developed for the contraction, head-loss, and Henry's (1950) discharge coefficients. Based on the maximization of the discharge and contraction coefficients and the minimization of the head-loss coefficient, results suggest that a gate should be installed at a distance of L /2 (where L is the sill length) from the upstream end of the weir crest, and the height of 1.25 H d (where H d is the water depth as referenced from the weir sill elevation) is the optimal height for the weir. By conducting experiments and constructing correlations for determining the contraction and head-loss coefficients under free flow conditions, the average values of these coefficients for the laboratory models were obtained as 0.664 and 0.133, respectively. Applying the average contraction and head-loss coefficients to the developed relationship for estimating the free and submerged discharge coefficients resulted in an error of 4% and 6%, respectively. WinGate alpha 0.2 software was used to estimate the experimental free and submerged discharge coefficient of the gated weir with an average error of 5.4% and 12.7%, respectively. It was done without any consideration of the cross-section shape of the weir or the location of the gate on the weir sill. In addition, an inspection of the submergence threshold of the gated weir showed an increase in the submergence threshold when the gate was moved further downstream from the upstream end of the sill.

Flow through a sluice gate over a broad crested weir under free- and submerged-flow conditions

Hydraulic characteristics of a sluice gate over a broad-crested weir

Experimental Study and Flow Analysis on a New Design of Water-Retaining Sluice Gate

Flow Downstream Sluice Gate with Orifice

Sluice Gate Design and Calibration: Simplified Models to Distinguish Flow Conditions and Estimate Discharge Coefficient and Flow Rate

Discharge coefficient of vertical sluice gates with broad crested weir under free-submerged orifice flows using best subset regression

Hydraulic characteristics of labyrinth sluice gate

Formula of water flow through the flat sluice gate in the open channel

Free-surface flow simulations for discharge-based operation of hydraulic structure gates

Influence of Sill on the Hydraulic Regime in Sluice Gates: An Experimental and Numerical Analysis

Flow Regime Discrimination and Methodology for Calculating Discharge in Trapezoidal Sluice Gates

Effects of ramp slope and discharge on hydraulic performance of submerged hump weirs

Experimental Study on the Hydraulic Performance of Porous Broad-Crested Weirs with Sloping Crests

Sluice Gate Discharge From Momentum Balance

Numerical simulation of flow characteristics of discharge under sluice gate

Discharge Coefficient and Submerged Coefficient of Streamlined Broad Crest Weir

Experimental Study on Flow Diversion Ratio of Low Head Sluice Built in Curved Channel

CHARACTERISTIC OF CONTRACTION AND DISCHARGE COEFFICIENT FOR FLOW UNDER SLUICE GATE

On the effect of flow regime and slope of the channel bed on the hydraulic performance of the sharp-crested rectangular side weir: a numerical simulation

Energy loss and contraction coefficients-based vertical sluice gate’s discharge coefficient under submerged flow using symbolic regression

Experimental and simulation analysis of flow patterns and energy dissipation through sluice gates in a U-shaped channel