Abstract:Hydraulic steel gates are the core adjustment mechanism for water conservancy projects, the safety of which is related to the safety of the entire water conservancy project. In this study, the issue of flow-induced vibration under the influence of pulsing water pressure when the deep-hole plane steel gate construction is partially opened is investigated using a numerical calculation approach of CFD–CSD coupling. The time-history pulsating pressure loads of each part are first determined by tracking the upstream, bottom, and downstream pulsating water pressure loads under partially open operation conditions of the gate. The impact of the water in front of the gate on the natural vibration mode and frequency of the gate is then investigated based on the analysis of the dry/wet modes of the gate structure. Additionally, the hydrodynamic load is applied to the finite element model of the gate structure while taking into account the fluid–structure coupling effect, and the results of the gate flow-induced vibration response are obtained. Three typical local opening relative openings are chosen, with the operating state of the design water head (Hs = 70 m) of a deep-hole plane steel gate as an example. According to the analysis's findings, the gate's natural vibration frequency is greatly lowered under the influence of the water in front of it, and its amplitude increases by 50%. The pressure value pressing on the gate changes dynamically as it is partially opened and discharged. The maximum dynamic displacement value and the maximum dynamic stress value of the gate both appear in the middle and lower part of the gate under the condition of partial opening, and both occur when the relative opening is e/H = 0.125. The maximum displacement value is 3.43 mm, and the maximum stress value is 161 MPa. The maximum dynamic displacement and dynamic stress of each gate component steadily decrease with an increase in the relative openness. The gate dynamic response analysis approach described in this research can serve as a guide for hydraulic engineering design.

Experimental Study and Flow Analysis on a New Design of Water-Retaining Sluice Gate

Three-dimensional Numerical Analysis on a New Design of Hydraulic Structure for Water Treatment

Numerical Investigation on Bottom Shear Stress Induced by Flushing Gate for Sewer Cleaning.

Experimental and simulation analysis of flow patterns and energy dissipation through sluice gates in a U-shaped channel

Analysis and research on sluice gate flow of a hydropower station under different working conditions

A Systematic Design Approach of a Float Type Sluice Gate for Flow Measurement Automation

Numerical simulation of flow characteristics of discharge under sluice gate

Hydraulic Issues of Energy Dissipation and Erosion Control for Horizontal Gate

Numerical Analysis of Flow-Induced Vibration of Deep-Hole Plane Steel Gate in Partial Opening Operation

EXPERIMENTAL STUDY AND NUMERICAL SIMULATION OF FLOW-INDUCED VIBRATION FOR THE HYDRAULIC STEEL RADIAL-GATE

Free-surface flow simulations for discharge-based operation of hydraulic structure gates

Study on Hydraulic Characteristic of Unsteady Flow at Huangchigou Water Distribution Hub by Observing Instantaneous Water Level Based on Single-Camera and Fixed-Scale Compensation Method

Application of CFD to predict the sluice gate jammed

Numerical simulation about fast gate hydrodynamic closing of hydropower

Experimental Investigation of Discharge Characteristics of Float Type Sluice Gate

Numerical simulation of turbulent flow behind sluice gate under submerged discharge conditions

Influence of Flashboard Location on Flow Resistance Properties and Internal Features of Gate Valve under the Variable Condition

The Unsteady Flow in the Wide-Shallow Open Channel with Controlling Gates

Experimental Study of Flow Characteristics Through Sluice Gates in U-Shaped Channels

Gate Operation Schemes and Channel Erosion below the Tidal Barrier in Shuanglong River

Hydraulic characteristics of a sluice gate over a broad-crested weir