Abstract:Fabricating of economical transitional metal oxide-based materials with satisfied low-temperature catalytic performance and application perspective is still a challenge in deep degradation of VOCs. Here, Mn-Cu bimetallic oxides were facilely prepared by one-step hydrothermal-redox method, which displayed much higher catalytic activity in toluene oxidation than those synthesized by hydrolysis-driven redox-precipitation or co-precipitation approach. It is shown that the lattice defect and oxygen vacancy concentration over prepared materials can be tuned by controlling Cu/Mn molar ratio. Amongst, spinel structured MnCu0.5 exhibited the highest catalytic activity, superior durability and water resistance in toluene total oxidation owing to abundant surface adsorbed oxygen species, excellent low-temperature reducibility, and high amounts of Cu+ and Mn3+. In detail, the reaction rate of MnCu0.5 was over 9.0 times higher than that of MnCu0.75, MnCu0.75-P and MnCu0.75-H2O2 at relative low temperature of 210 °C. The cyclic redox process with easier oxygen species mobility played a key role in the catalytic oxidation of toluene. Typical reaction intermediates as benzyl alcohol, benzaldehyde, benzene, phenol, and benzoquinone could be detected by PTR-MS, which further decomposed to acetone, ethanol, ketone, acetic acid, methanol, formaldehyde and acetaldehyde species by ring opening before total mineralization.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an efficient and economical transition - metal - oxide - based material for catalytically degrading volatile organic compounds (VOCs), especially toluene, at a relatively low temperature. Specifically, the paper explores the catalytic performance and reaction pathway of the Mn - Cu bimetallic oxide catalyst prepared by a one - step hydrothermal - redox method. The paper points out that currently, in terms of deeply degrading VOCs, it is still a challenge to prepare economical transition - metal - oxide - based materials with satisfactory low - temperature catalytic performance and application prospects. Therefore, researchers adjust the Cu/Mn molar ratio to control the lattice defects and oxygen vacancy concentration of the prepared materials, so as to improve their catalytic activity, stability and water resistance, especially in the complete oxidation of toluene. The paper mentions that the Mn - Cu bimetallic oxide catalyst prepared by this method, especially MnCu_0.5 with a spinel structure, exhibits the highest catalytic activity, excellent durability and water resistance in toluene oxidation. This is mainly attributed to abundant surface - adsorbed oxygen species, excellent low - temperature reducibility and high contents of Cu^+ and Mn^{3+}. In addition, the paper also studies in detail the role of lattice oxygen and the reaction pathway in the toluene oxidation process. Typical reaction intermediates such as benzyl alcohol, benzaldehyde, benzene, phenol and benzoquinone are detected by proton - transfer - reaction - mass spectrometry (PTR - MS), and are further decomposed into substances such as ketones, acetic acid, methanol, formaldehyde and acetaldehyde, and finally complete mineralization is achieved. In summary, this paper aims to improve the catalytic efficiency of the catalyst in VOCs degradation, especially in the catalytic oxidation of toluene, by improving the preparation method of the catalyst, thereby providing more effective technical means for environmental protection.

Efficient catalytic degradation of toluene at a readily prepared Mn-Cu catalyst: Catalytic performance and reaction pathway

Insight into the catalytic performance and reaction routes for toluene total oxidation over facilely prepared Mn-Cu bimetallic oxide catalysts

Catalytic Ozonation of Toluene over Amorphous Cu-Mn Bimetallic Oxide: Influencing Factors, Degradation Mechanism and Pathways.

Enhanced catalytic oxidation of toluene over manganese-based multi-metal oxides synthesized by ozone driving redox reaction

Investigation of Cu-Mn Catalytic Ozonation of Toluene: Crystal Phase, Intermediates and Mechanism

Adsorption and Catalytic Ozonation of Toluene on Mn/ZSM-5 at Low Temperature

Low-Temperature Combustion of Toluene over Cu-Doped SmMn<sub>2</sub>O<sub>5</sub> Mullite Catalysts via Creating Highly Active Cu<SUP>2+</SUP>-O-Mn<SUP>4+</SUP> Sites

Redox-Induced In Situ Growth of MnO2 with Rich Oxygen Vacancies over Monolithic Copper Foam for Boosting Toluene Combustion

Balance of Activation and Ring-Breaking for Toluene Oxidation over CuO-MnOx Bimetallic Oxides

Oxygen vacancy-mediated Mn2O3 catalyst with high efficiency and stability for toluene oxidation

Boosting the total oxidation of toluene by regulating the reactivity of lattice oxygen species and the concentration of surface adsorbed oxygen

Super Stability of Cu-Mn/Y Bimetallic Catalyst for Ozone-assisted Catalytic Oxidation of Toluene

MCM-41 supported Cu-Mn catalysts for catalytic oxidation of toluene at low temperatures.

Facile synthesis of homogeneous hollow microsphere Cu-Mn based catalysts for catalytic oxidation of toluene

Solvent-free catalytic oxidation of toluene over heterogeneous CeMnOx composite oxides

Catalytic Ozonation of Toluene and Dichloromethane Mixture at Low Temperatures over Modified MnOx-based Catalyst

Influences of different surface oxygen species on oxidation of toluene and/or benzene and their reaction pathways over Cu-Mn metal oxides

Preparation of MnO2 decorated Co3Fe1O powder/monolithic catalyst with improved catalytic activity for toluene oxidation

Enhanced toluene oxidation by photothermal synergetic catalysis on manganese oxide embedded with Pt single-atoms

Tuning the crystallinity of the MnOx catalysts to promote toluene catalytic oxidation

Modulated synthesis of MnO2-decorated Fe–Mn composite oxides:synergistic effects on boosting the performance of toluene oxidation