Abstract:As a precursor material, CoyCu3−y-MOF-74 has been synthesized by using a cost-effective and environmentally friendly mechanochemical method. It had a uniform nano-morphology and a controllable stoichiometric composition. By calcinating the CoyCu3−y-MOF-74 material, a bimetallic Co-Cu oxide catalytic material, with the formula M-CoyCu3−yOx, could, thereafter, be prepared. It was later on used for catalytic oxidation of toluene. The effect of calcination temperature and Co/Cu molar ratio on the redox properties, catalytic activity, and structural properties of the catalyst, were also systematically studied. The M-Co2Cu1Ox catalyst showed a complete toluene conversion of 1000 ppm toluene at 225 ℃ and with a under weight hour space velocity of 30,000 ml/ (g h). The corresponding conversion temperature for 50% and 90% of the original amount of M-Co2Cu1Ox (i.e., T50 and T90) were 202 and 220 ℃, respectively. X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and electron paramagnetic resonance (EPR) results also showed a high density of oxygen vacancies in M-Co2Cu1Ox. Also, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments indicated that benzaldehyde and benzoic acid were the main intermediates formed during the catalytic oxidation of toluene. In addition, the M-Co2Cu1Ox catalyst did also show an excellent durability and good water resistance by exposing it to a 5% water vapor for 24 h. Thus, the green and facile mechanical synthesis of the MOF-74 precursor has been proven to be very beneficial for the design and synthesis of a mixed metal oxide catalyst with a high toluene catalytic oxidation efficiency.

MCM-41 supported Cu-Mn catalysts for catalytic oxidation of toluene at low temperatures.

Investigation of Cu-Mn Catalytic Ozonation of Toluene: Crystal Phase, Intermediates and Mechanism

Catalytic Ozonation of Toluene over Amorphous Cu-Mn Bimetallic Oxide: Influencing Factors, Degradation Mechanism and Pathways.

Enhanced catalytic oxidation of toluene over manganese-based multi-metal oxides synthesized by ozone driving redox reaction

Adsorption and Catalytic Ozonation of Toluene on Mn/ZSM-5 at Low Temperature

Low-Temperature Combustion of Toluene over Cu-Doped SmMn<sub>2</sub>O<sub>5</sub> Mullite Catalysts via Creating Highly Active Cu<SUP>2+</SUP>-O-Mn<SUP>4+</SUP> Sites

Facile synthesis of homogeneous hollow microsphere Cu-Mn based catalysts for catalytic oxidation of toluene

Insight into the catalytic performance and reaction routes for toluene total oxidation over facilely prepared Mn-Cu bimetallic oxide catalysts

Mesoporous MnCeOx Solid Solutions for Low Temperature and Selective Oxidation of Hydrocarbons.

Efficient catalytic degradation of toluene at a readily prepared Mn-Cu catalyst: Catalytic performance and reaction pathway

Enhanced catalytic toluene oxidation by interaction between copper oxide and manganese oxide in Cu-O-Mn/γ-Al2O3 catalysts

Heterogeneous catalytic oxidation of toluene with molecular oxygen over Cu-Mn oxides

Cu-Mn-Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Catalytic oxidation of toluene over Co-Cu bimetallic oxides derived from CoyCu3-y-MOF-74

Super Stability of Cu-Mn/Y Bimetallic Catalyst for Ozone-assisted Catalytic Oxidation of Toluene

Mn–Co Oxide Decorated on Cu Nanowires As Efficient Catalysts for Catalytic Oxidation of Toluene

Enhancing Low-Temperature Catalytic Performance for Toluene Oxidation Using In-Situ Pyrolyzed Mn-Doped MOF-74 Derived MCNOx Catalysts

Oxidation of Toluene over Mesoporous MnO2/CeO2 Nanosphere Catalysts: Effects of the MnO2 Precursor and the Type of Support

Boosting the total oxidation of toluene by regulating the reactivity of lattice oxygen species and the concentration of surface adsorbed oxygen

Tuning the crystallinity of the MnOx catalysts to promote toluene catalytic oxidation

One-step Synthesis of Bimetallic Pt-Pd/MCM-41 Mesoporous Materials with Superior Catalytic Performance for Toluene Oxidation