Abstract:When the thermoplastic composites reach the service limits during the service, the recovery and utilization are the key concerns. Meanwhile, the improvement of strength, toughness and durability of epoxy resin is the effective method to prolong the service life of materials and structures. In the present paper, three kinds of thermoplastic resins (polypropylene-PP, polyamide 6-PA6 and polyether-ether-ketone-PEEK) and composites (carbon fiber-PEEK, glass fiber-PA6 and glass fiber-PP) were adopted as the fillers to reinforce and toughen the epoxy resin (Ts). The mechanical, thermal and microscopic analysis were conducted to reveal the performance improvement mechanism of Ts. It can be found that adding thermoplastic resin and composite fillers at the low mass ratio of 0.5~1.0% brought about the maximum improvement of tensile strength (7~15%), flexural strength (7~15%) and shear strength (20~30%) of Ts resin. The improvement mechanism was because the addition of thermoplastic fillers can prolong the cracking path and delay the failure process through the load bearing of fiber, energy absorption of thermoplastic resin and superior interface bonding. In addition, the thermoplastic composite had better enhancement effect on the mechanical/thermal properties of Ts resin compared to thermoplastic resin. When the mass ratio was increased to 2.0~3.0%, the agglomeration and stress concentration of thermoplastic filler in Ts resin appeared, leading to the decrease of mechanical and thermal properties. The optimal addition ratios of thermoplastic resin were 0.5~1.0% (PEEK), 1.0~2.0% (PA6) and 0.5~1.0% (PP) to obtain the desirable property improvement. In contrast, the optimal mass ratios of three kinds of composite were determined to be 0.5~1.0%. Application prospect analysis indicated adding the thermoplastic resin and composite fillers to Ts resin can promote the recycling and reutilization of thermoplastic composites and improve the performance of Ts resin, which can be used as the resin matrix, interface adhesive and anti-corrosion coating.

Preparation and properties of aniline chain‐extended thermoplastic epoxy resin using triphenylphosphine as catalyst

Study on Synthesis and Thermal Property of Epoxy Resin Containing Naphthalene

A new strategy to improve the toughness of epoxy thermosets by introducing the thermoplastic epoxy

Preparation and properties of high-temperature resistant bisphthalonitrile resins containing trifluoromethyl groups reinforced by poly (aryl ether nitrile) capped by phthalonitrile and composites

Chain extension of thermoplastic polyamide elastomer and its foaming performance

Effect of the Addition of Thermoplastic Resin and Composite on Mechanical and Thermal Properties of Epoxy Resin

Fully recyclable and high-performance carbon fiber composites based on thermoplastic epoxy polymer

Toughening and strengthening of low-temperature resistant epoxy resins by introducing high-performance thermoplastic resin with phthalazinone structure

Amino-functionalized Carbon Nanotubes/polyphosphazene Hybrids for Improving the Fire Safety and Mechanical Properties of Epoxy

Preparation, characterization, and performance of reactive phenolphthalein poly(aryl ether sulfone) tougheners highly compatible with epoxy resin

Investigation on the Curing and Thermal Properties of Epoxy/Amine/Phthalonitrile Blend

Study of the Self-Polymerization of Epoxy/Phthalonitrile Copolymers and Their High-Performance Fiber-Reinforced Laminates

Study on Chain Extension Blending Modification and Foaming Behavior of Thermoplastic Polyamide Elastomer

A simple synthesis of supramolecular Polyamide12 via solid‐state melt reaction and its interlaminar properties in Carbon Fiber Reinforced Thermoplastics

Studies on the curing behavior, thermal, and mechanical properties of epoxy resin‐co‐amine‐functionalized lead phthalocyanine

A New Strategy to Improve the Toughness of Epoxy Thermosets—By Introducing Poly(ether nitrile ketone)s Containing Phthalazinone Structures

Preparation of a self-catalyzed amino-epoxy phthalonitrile resin with a large processing window

Chemical treatment on polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr)/banana skin powder (BSP) composites using epoxy resin

Co-curing preparation of flame retardant and smoke-suppressive epoxy resin with a novel phosphorus-containing ionic liquid

Effect of epoxy chain extenders on molecular structure and properties of polylactic acid

Facile synthesis of hyperbranched epoxy resin for combined flame retarding and toughening modification of epoxy thermosets