Anand Palanivel Karthik Palanivel Robert Cep Rajesh Durvasulu Muniyandy Elangovan Prasanna Venkatesh Ramdas a Department of Mechanical Engineering,Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology,Chennai,Indiab Department of Mechanical Engineering,Vel Tech Multi Tech Dr. Rangarajan Dr. Sakunthala Engineering College,Chennai,Indiac Department of Machining,Assembly and Engineering Metrology,Faculty of Mechanical Engineering,VSB-Technical University of Ostrava,Ostrava,Czech Republicd Department of Biosciences,Saveetha School of Engineering,Saveetha Institute of Medical and Technical Sciences,Chennai,Indiae Department of Mechanical Engineering,SACS MAVMM Engineering College,Madurai,India

Abstract:Natural fibers have in recent times turned into reasonable to automotive production as a substitute corroboration for synthetic fiber reinforced thermoplastics. This research was motivated by evolving and assessing benzoyl-treated Neem and Pineapple fiber reinforced and particulated by sawdust in hybrid epoxy polymers for automotive. Seven types of composites were fabricated using hand layup technique. The prepared composites were cut according to their ASTM standard. The Hybrid Neem and Pineapple Fiber Reinforced with Saw dust Particulated Epoxy Composite (NPFRSPEC) was studied for thermal analysis like Thermal Conductivity (TC), Coefficient of Linear Thermal Expansion (CLTE), Heat Deflection Temperature (HDT) and Thermal Gravimetric Analysis (TGA). Morphological analysis was done through FESEM on failure surfaces. The results reveal that treatment fibers enhanced the thermal stability among the non-treated composite. The treated fibers exhibited 10% increase in heat deflection temperature and 28% increase in thermal conductivity. From the results, it's also noticed that the treated hybrid composite delivers better thermal efficiency when compared with other natural fiber-reinforced polymers available in the sector which could potentially replace long fiber reinforced thermoplastic components in car doors and bumpers. 近年来,天然纤维作为合成纤维增强热塑性塑料的替代品,在汽车生产中变得合理. 这项研究的动机是在汽车用混合环氧聚合物中开发和评估由锯末增强和颗粒化的苯甲酰处理的印楝和菠萝纤维. 采用手工叠层技术制备了七种类型的复合材料. 根据ASTM标准切割制备的复合材料. 研究了锯末颗粒环氧复合材料(NPFRSPEC)增强的混合楝树和菠萝纤维的导热系数(TC)、线性热膨胀系数(CLTE)、热变形温度(HDT)和热重分析(TGA)等热分析. 通过FESEM对失效表面进行形态分析. 结果表明,处理纤维增强了未处理复合材料的热稳定性. 处理后的纤维的热变形温度提高了10%,导热系数提高了28%. 从结果中还可以注意到,与该行业可用的其他天然纤维增强聚合物相比,经处理的混合复合材料具有更好的热效率,这可能会取代汽车车门和保险杠中的长纤维增强热塑性部件.

Chemical treatment on polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr)/banana skin powder (BSP) composites using epoxy resin

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

The Effect of Epoxy Resin Compatibilizer On Polypropylene (PP) / Recycled Acrylonitrile Butadiene Rubber (NBRr) / Banana Skin Powder (BSP) Composites

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

The characterization and properties of low linear density polyethyelene (LLDPE)/ acrylonitrile butadiene rubber (NBR)/ palm press fiber (PPF) with γ-aminopropyltriethoxysilane coupling agent

Insight on the properties of thermoplastic elastomer-based natural rubber and recycled rubber post-treated with electron beam irradiation

Study on the modification of polyester resin bamboo fiber-based composite with euphorbia coagulum and their effect on mechanical and thermal properties

Thermal Adsorption and Mechanical Behaviour of Polypropylene Hybrid Composite Synthesized by Glass/Hemp Fibre via an Injection Moulding Process

Optimization of the Mechanical Behavior of Polymer Composites Reinforced with Fibers, Nanoparticles, and Rubbers

Study on the Effect of Halloysite Nanotubes on the Mechanical Properties and Swelling Resistance of Ethylene-Propylene Diene Monomer (EPDM)/Nitrile Butadiene Rubber (NBR) Blend Nanocomposites

Effect of epoxidized natural rubber on thermal properties, fatigue life, and natural weathering test of styrene butadiene rubber/recycled acrylonitrile‐butadiene rubber (SBR/NBRr) blends

Experimental Investigation on Thermal Behaviors of Benzoyl Treated Neem / Pineapple Fiber Reinforced Saw Dust Filled Epoxy Hybrid Green Composites

Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties

Effect of the Addition of Thermoplastic Resin and Composite on Mechanical and Thermal Properties of Epoxy Resin

Dynamic and static mechanical properties of PP/EVA blend nanocomposites: Effects of type of masterbatch preparation technique and nature of compatibilizer

Effect of epoxy functionalized elastomer modified carbon fiber on mechanical properties and interfacial adhesion of chloroprene rubber (CR)/natural rubber (NR) composites

Effect of the synergistic interaction of zinc adipate, hydrotalcite and ethylene propylene rubber on the performances of polypropylene

Experimental investigation on bamboo fiber reinforced epoxy polymer composite materials developed through two different techniques

Investigation on the mechanical, thermal, structural and morphological properties of polypropylene/ethylene-vinyl acetate copolymer/graphene oxide nanocomposites: effect of nanofiller surface functionalization and compatibilizers

Fabricating super-tough polypropylene nanocomposites incorporating silane cross-linked in-situ nano-fibrillated ethylene-1-butene copolymer

High concentration NaOH processing of natural fiber explored polypropylene composite featured with mullite: characteristics investigation