Abstract:In this work, we studied the microstructure and mechanical properties of hot-pressed B4C, B4C + 5 wt% TiAl, and B4C + B + 5 wt% TiAl. The X-ray diffraction and Raman spectroscopy results showed that the addition of Ti–Al alone did not led to Al doping in B4C, and it did not reduce the degree of amorphization of B4C generated under high shear stresses. In contrast, the co-addition of Ti–Al and B resulted in both B and Al solid solutions in the B4C and effectively mitigated the amorphization of B4C. Electron probe microanalysis (EPMA) and energy dispersive X-ray spectroscopy (EDS) analyses suggested that the co-addition of Ti–Al and B promoted the interdiffusion of lightweight elements such as B, C, Al, Mg, and Si at high temperatures, resulting in a dense body with uniformly distributed second phase. The transmission electron microscopy (TEM) observations of the B4C + B + 5 wt% TiAl sample showed that a nano–core–shell structure with aggregated dislocations in the shells which was generated at TiB2 grains due to the segregation and dissolution-precipitation between TiB2 and B-rich boron carbide. The short-range ordered substitution of B and the disordered doping of Al in B4C led to lattice distortion and expansion, resulting in the formation of high-density defects, including stacking faults and nano-twins, improving the mechanical properties for B4C. The B4C + B + 5 wt% TiAl sample exhibits a combination of fascinating properties, including low density (2.52 g/cm3), high Vickers hardness (35.53 ± 0.83 GPa) and moderate fracture toughness (4.37 ± 0.35 MPa m1/2).

The Effects of Transition Metal Oxides (Me = Ti, Zr, Nb, and Ta) on the Mechanical Properties and Interfaces of B4C Ceramics Fabricated via Pressureless Sintering

The effect of transition metal carbides MeC (Me = Ti, Zr, Nb, Ta, and W) on mechanical properties of B4C ceramics fabricated via pressureless sintering

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Effect of Ti and its compounds on the mechanical properties and microstructure of B4C ceramics fabricated via pressureless sintering

Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite

Strengthened Interfacial Bonding and Its Effects on Fracture Mode of TaC Ceramics with Addition of B

Effect of Boron Addition on Microstructure, Mechanical Properties and Oxidation Resistance of TaC Ceramics

Effect of Ti Doping on the Mechanical Properties of B4C Composite Ceramics

The effect of B and Ti–Al intermetallics additions on the microstructure and mechanical properties of hot-pressed B4C

Effects of TaC Addition on Microstructure and Mechanical Properties of SiBCN Composite Ceramics

Effect of TiB2 particles on microstructure and mechanical properties of B4C–TiB2 ceramics prepared by hot pressing

Phase Formation, Microstructure and Mechanical Properties of TaB2-SiC Composites Synthesized by Reaction Hot Pressing: Effects of SiC Contents and Oxygen Impurity

Design, Preparation, and Enhanced Mechanical Properties of Novel Plate-Like Grains Toughened (zr, Ti, W, Ta)C Medium-Entropy Ceramics Fabricated by In-Situ Reaction Hot-Pressing

Pressureless sintering of WC-TaC binderless carbide

Microstructure and mechanical properties of TiB2–B4C ceramics fabricated by hot-pressing

Effect of Mechanical Alloying on Sinterability and Phase Evolution in Pressure-Less Sintered TiB2‒TiC Ceramics

Low-temperature synthesis and mechanical performance analysis of single-phase high-entropy (Ti,Cr,V,Nb,Ta)B 1.9 ceramics

Pressureless Sintering of ZrB2–SiC Ceramics: the Effect of B4C Content

Microstructure and mechanical properties of pressure‐less sintered B4C–SiC–ZrB2–LaB6 ceramic composites

Influence of TiC content on microstructure and mechanical properties of (Ta, Ti)C ceramics

Effects of WC/TiC addition on the thermodynamic behavior of TiB 2 -based cermet during sintering process