Abstract:AbstractThe search for suitable friction materials for high-speed train is an attractive but difficult problem. In recent years, a variety of different novel friction materials were fabricated to meet the aims of high loads and speeds under ambient environment. Carbon fiber-reinforced carbon composites (C/C), carbon fiber-reinforced silicon carbide composites (C/C-SiC) and metallic composites fabricated by powder metallurgy are three excellent materials among them. Here a comparison of these three different materials working as brake pads, coupled with high-density C/C-SiC brake disk, was described. All the experiments were conducted using the same procedure with increasing initial braking speed (the rotation speed of brake disk at the beginning of braking process) from 30 to 59 m/s and constant load of 1.25 MPa, simulating the real working condition of high-speed train. The coefficient of friction (COF) and wear rates of three materials were compared and analyzed. During experiments, the COF of metallic and C/C pads remains nearly constant at 0.31 and 0.22, respectively, with increasing braking speed, while that of C/C-SiC exhibits a parabola. These different trends of COF may be attributed to the distinctive forming processes of friction film on the top of contact surfaces. Meanwhile, the wear rates of metallic composites increase rapidly from 683 to 1803 mm3/MJ with initial braking speed, while C/C-SiC presents the highest wear loss of 1887 mm3/MJ at 49 m/s and lowest value of 315 mm3/MJ at 59 m/s. Interestingly, the wear rate of C/C composites, due to the appropriate bonding strength of matrix/fiber and relatively high shear stress, decreases from 3698 to 903 mm3/MJ with increasing initial braking speed, which does not consist with pre-existing paper. Thus, metallic pads presented the lowest wear rates at lower speed (<49 m/s) but the highest at high speed, while C/C-SiC composite pads showed the greatest wear resistance at high speed. This investigation of three different friction materials will enhance our understanding of these friction materials and benefit the selection and safe application of high-speed train friction materials.

A comparative investigation into the material matching performance of different friction pairs under current-carrying friction

A Comparative Investigation of the Tribological Behavior and Wear Mechanism of Bronze-graphite Composite under Dry- and Water-lubricated Sliding Against Steel

Effect of counterpart materials on tribological behaviors of copper impregnated carbon/carbon composite under electric current condition

Comparative study of the current-carrying tribological properties of carbon graphite composites with different hardnesses

Investigation of the Enhancement in Current-Carrying Friction Performance with Internal “copper Network Structure” Constructed by Pre-Oxidized Carbon Fibers of the Carbon Skateboard

Tribology performance of Cu-C/C composites with and without current

Effect of different gaps in the conductor rail joints on the current-carrying wear performance of carbon skateboards/conductive rail contact

Research Progress on Current-Carrying Friction with High Stability and Excellent Tribological Behavior

Effect of Magnetic Field on the Current-carrying Friction and Wear Performance of C/Cu Contact Pairs

The Study of Arc Rate, Friction, and Wear Performance of C/C Composites in Pantograph–Catenary System

Research of Friction and Wear Behavior of Sliding Contacts under Strong Current Conditions

Comparative Investigation into the Friction and Wear Behaviours of a Cu–Ag Contact Wire/carbon Strip and a Pure Copper Contact Wire/carbon Strip at High Speeds

Comparison of Friction and Wear Behavior Between C/C, C/C-SiC and Metallic Composite Materials

The role of relatively humidity in friction and wear behaviors of carbon sliding against copper with electric current

Study on Current-Carrying Tribological Characteristics of C-Cu Sliding Electric Contacts under Different Water Content

Study on material transfer in the process of contact strips rubbing against a contact wire with electric current

Progress on Current-Carry Friction and Wear: An Overview from Measurements to Mechanism

Characteristics of Sliding Electric Contact Between Couples of Carbon and Metal Materials

Tribological and Conductive Behavior of Cu/Cu Rolling Current-Carrying Pairs in a Water Environment

Comparative Study on Wear Behaviors of Metal-Impregnated Carbon Material and C/C Composite Under Electrical Sliding