Abstract:<p>For a heat treatment furnace, the precise study of the flow characteristics, combustion and heat transfer in the furnace is essential to know the temperature distribution in a slab during the heating process. In this context several different three-dimensional CFD (Computational Fluid Dynamics) models have been developed to simulate the combustion and heat transfer process in the furnace. These models were developed based on direct fired reheating furnaces with continuous fuel input. In this paper, a novel three-dimensional transient CFD model used to investigate the slab heating characteristics in the heat treatment furnace with pulse combustion was developed. The transient calculation in the furnace was performed based on the steady-state simulation of the furnace temperature, and the movement of slabs on the rollers in the furnace was simulated using dynamic mesh. By comparison, the results from the EDC with two different reaction mechanisms showed good consistency. However, the EDC with the two-step reaction mechanism required one fifth the calculation time of the EDC with the GRI-Mech3.0, and was thus the preferred model. In contrast to direct fired reheating furnaces, the outer radiant tube walls were treated as the coupled boundary conditions in the model to realize indirect heat transfer between the process gas in the furnace and the combustion gas in the radiant tubes. Furthermore, a pulse combustion method was proposed to control the working states of the burners based on UDF (User-Defined Function), in order to realize the pulse combustion process in the heat treatment furnace. By the validation of "Black Box", the temperature variation of the slab and the gas temperature in the furnace predicted by the model agreed well with the experimental results. The simulation revealed that the temperature distribution of the radiant tubes and furnace gas was uniform and the maximum temperature difference on the outer radiant tube walls was less than 84 K. During the slab transient heating process, the slab temperature distribution became more uniform in the soaking zone and the maximum temperature difference along the thickness of the slab was below 13 K at discharge.</p>

CFD simulation and experimental study of calcium carbide heat transfer under natural convection and radiation heat transfer

Investigation On The Ash Deposition Of A Radiant Syngas Cooler Using Critical Velocity Model

Development and Cfd Simulation of A Novel Phosphoric Reactor with Waste Heat Recovery

Numerical analysis of the heat transfer of radiant tubes and the slab heating characteristics in an industrial heat treatment furnace with pulse combustion

Influence of Feed Architecture on Heat and Mass Transfer in Calcium Carbide Electric Furnace

Experimental investigation on waste heat reutilization of calcined petroleum coke

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

CFD simulation of combustion and heat transfer in ethylene cracking furnace

Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization

Numerical Simulation Of Flow And Heat Transfer In Connection Of Gasifier To The Radiant Syngas Cooler

An Electromagnetics-Temperature-component Multi-Physical Coupled Model for Electric Furnace in Calcium Carbide Smelting Process

Numerical Simulation of Flow and Temperature Fields in the Radiation Chamber of a Waste-Heat Boiler for Copper Flash Smelting

CFD simulation and optimization of secondary air distribution for waste combustion in grate furnace

Experimental Study and Model Development for the High-Rayleigh-number Corium Pool with Heat and Mass Transfer

TRANSIENT COUPLED HEAT TRANSFER IN HIGH TEMPERATURE CERAMICS SUBMITTED TO AERODYNAMIC HEATING

Impact of Flue Gas Radiative Properties and Burner Geometry in Furnace Simulations

Computational Fluid Dynamics Simulation of Combustion and Selective Non-Catalytic Reduction in a 750 T/d Waste Incinerator

Heat Transfer Simulation of Fuel Transport Cask for High Temperature Gas Cooled Reactor

Numerical simulation on flow, combustion and heat transfer of ethylene cracking furnaces

Experimental Investigation and Modeling of Cooling Processes of High Temperature Slags

Analysis and optimization about electromagnetics-temperature-component distribution in calcium carbide electric furnace