Abstract:The effects of Nb alloying on microstructural evolution and mechanical performance of a newly developed solid-solution strengthened Fe-Ni-based superalloy, considered as the candidate material for high-temperature components manufacturing in fourth Generation (Gen IV) advanced nuclear reactor, were systematically investigated. The results show that the increase in the Nb content obviously increased the volume fraction and average size of MC carbides, and the MC carbides more preferentially distributed at grain boundaries. The average grain size and low Σ coincident site lattice (CSL) boundary exhibited a gradually decreased trend with increasing Nb content. Meanwhile, the thermal stability (grain size and grain boundary precipitation) of the alloy can be improved notably via Nb alloying. The tensile strength of Nb-alloyed alloys at 750 °C was enhanced significantly compared to that of Nb-free alloy, mainly due to the synergistic effect of solid-solution strengthening and fine grain strengthening. It was impressive that the variation of Nb content had no obvious influence on the yield strength, but gradually decreased the ultimate tensile strength. The detrimental effects of the decrease in Σ3 boundaries and intergranular precipitates were assumed to restrict the strengthening factors. The ductility of Nb-alloyed alloys decreased remarkably due to the changed dominant deformation mechanism from planar slip to wavy slip; however, it showed an increasing trend in high Nb-content alloys due to the occurrence of dynamic recrystallization and grain rotation. The present work establishes Nb alloying as an effective method to optimize the microstructure and mechanical properties of solid-solution strengthened Fe-Ni-based superalloys, and the appropriate Nb content is recommended to be controlled below 0.5 wt% for this alloy.

Effect of Nb addition on the internal oxidation of novel Ni-base superalloy

Effect of Substrate Characteristics on Interdiffusion Coefficients of Ni and Al Atoms in Β-Nial Phase of Aluminide Coatings

The high-temperature oxidation behavior and mechanism in a powder metallurgy Ni-based superalloy featuring δ-Nb3Al addition

Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

The Effect of Nb, Ta, and Ti on the Oxidation of a New Polycrystalline Ni-Based Superalloy

Effect of Y on the Oxidation Behavior of a Directionally Solidified Ni-based Single Crystal Superalloy

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

Microstructural Instability and Precipitation Behaviors of Intermetallic Phases in a Nb-Containing CoNi-Based Superalloy

Influence of Ti addition on oxidation behavior of Ni-Cr-W-based superalloys

The synergy effect of elements on the oxidation resistance of a high-purity directionally solidification nickel-based superalloy

Effect of Nb and B on the Precipitation Behaviors in Al-Ti-Nb Balanced Ratio Ni-Based Superalloy: A Phase-Field Study

The microstructure and mechanical performance optimization of a new Fe-Ni-based superalloy for gen IV nuclear reactor: The critical role of Nb alloying strategy

Effect of Nb Addition on Oxidation Mechanisms of High Cr Ferritic Steel in Ar–H2–H2O

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

Effect of Ti and Al on Microstructure and Partitioning Behavior of Alloying Elements in Ni-based Powder Metallurgy Superalloys

Oxidation Behaviour of New Nickel-Base Superalloys with Varying Aluminium: Niobium Ratio

Effect of Nb on inclusions and phase transformation in simulated high heat input coarse-grain HAZ of Nb/Ti low carbon microalloyed steel

Effects of Ce addition on the oxidation behavior of Ni-28W-6Cr superalloy

Effects of Niobium Addition on Dynamic Mechanical Behavior and Fracture Properties of Iron-Aluminide-Based Alloys

Effect of Yttrium Additions on the High-Temperature Oxidation Behavior of GH4169 Ni-Based Superalloy