Abstract:Purpose Nowadays, ample industries are fascinated to look for high strength and light weight materials for the development of robust parts. Because of light weight and high stiffness to weight ratio; usage of aluminum parts is growing rapidly, especially in automotive engineering. Process improvement of Al alloys and their grain structure refinement is the current area of interest in casting companies. In this research work, an investigation has been carried out to enhance the process improvement of die casting by optimization of various significant parameters and their refinement of grains by the effect of Nb-C novel grain refiner. Design/methodology/approach L27 orthogonal array (OA) has been considered to optimize the preferred casting input parameters such as molten metal temperature (°C), die temperature (°C), injection pressure (bar), Al-3.5Nb-1.5 C novel grain refiner and Ni alloying additions as key process parameters in order to increase the quality and efficiency of Al-9Si-3Cu aluminum alloy die casting by reducing the porosity formation. Findings It was observed that the porosity values have significantly decreased from 0.88% to 0.25% particularly at 0.1 wt.% of new grain refiner and 0.5 wt. % of Al-6Ni master alloy. As per the ANOVA results, it was observed that Al-3.5FeNb-1.5 C grain refiner ( F value 2609.22), Al-6Ni alloying addition ( F value 1329.13), molten metal temperature ( F value 1002.43) and, injection pressure ( F value 448.06) are the factors that significantly affects the porosity, whereas die temperature was found to be insignificant. The results show that new grain refiner is one the most significant factor among the other selected parameters. The contribution of the new grain refiner to the variation of mean casting porosity is around 57.74%. confidence interval (CI) has also been estimated as 0.013 for 95% consistency level to validate the predicted range of optimum casting porosity of aforesaid alloy. Originality/value To the best of the authors' knowledge, no study has been conducted in the past to investigate the combined effect of these die casting parameters and composition factors for the development of Al-Si robust cast parts. The paper represents original research and provides new information for the fabrication of die casting parts.

Optimization of Die casting process based on Taguchi approach

Process Optimization of Low-pressure Die Casting of Aluminum Alloy Wheel based on Taguchi Method

Study on Simulation of Stamping Forming and Die Surface Optimization of Aluminum Alloy Plate

Die casting process optimization using Taguchi methods

Porosity formation studies in high pressure die castings of Al-9Si-3Cu alloy based on Taguchi method

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Optimizing Factors affecting gas porosity in GDC of Al-Si (A356) Alloy using Taguchi’s DOE

Optimization of Low-Pressure Die Casting Process with Soft Computing

Optimization of Precision Die Design on High-Pressure Die Casting of AlSi9Cu3

High-pressure die casting process optimization for improving shrinkage porosity and air entrainment in carburetor housing with aluminum alloy using Taguchi-based ProCAST simulation and MADM-based overall quality index

Optimization of process parameters to improve dimensional accuracy of investment casting using Taguchi approach

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

An Internet of Things-enabled model-based approach to improving the energy efficiency of aluminum die casting processes

The optimization accuracy control of a die-casting product part

Optimization of Semi-solid High-Pressure Die Casting Process by Computer Simulation, Taguchi Method and Grey Relational Analysis

Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Optimization of low-pressure die casting process parameters for reduction of shrinkage porosity in ZL205A alloy casting using Taguchi method

Synthesis of Stir-Cast AA7050/5%B4C Composite and Optimization of EDM Response Parameters Using Taguchi Analysis

Optimization of vacuum counter-pressure casting process for an aluminum alloy casing using numerical simulation and defect recognition techniques

Multi-objective optimization basing modified Taguchi method to arrive the optimal die design for CGP of AZ31 magnesium alloy