Abstract:Colossal permittivity ceramic materials (CP, >10 3 ) have the potential of miniaturization and convenience for electric components. Unfortunately, they are often accompanied by high dielectric loss (>0.5), which limits their application. In this work, Ti 1- x (Tm 0.5 Nb 0.5 ) x O 2 (TTNO x ) ceramics are prepared via the solid state method. The results show that the main phase of doped samples maintains the rutile TiO 2 phase and the average grain size decreases with increasing additive amounts. Gradually, the Tm 2 Ti 2 O 7 phase appears and subsequently it is converted to the TmNbTiO 6 phase. Furthermore, the low dielectric loss and colossal permittivity are synchronously achieved in doped ceramic samples by defect regulation. Especially, high permittivity of ∼1.61 × 10 5 , low dielectric loss of ∼0.078 (1 kHz) and the AC resistivity of ∼10 −9 s/cm are achieved in x = 0.01 samples at room temperature with good frequency and temperature stability. The true origin is deeply discussed by some analyses of XRD, XPS, SEM, Raman spectra and the complex impedance. The results show that enhanced dielectric performance originates from this fact that the addition of Nb and Tm ions triggers defective dipoles formation in grains, such as TiTi′/TmTi′−VO..−TiTi′/TmTi′ , TiTi′/TmTi′−NbTi∙ , pinning the electron and limiting its long-range transition. Furthermore, the grain boundary resistivity is crucial to the ceramic conductivity. This study has driving implications for the application of colossal permittivity ceramic materials.

Improvement of the dielectric properties of rutile TiO2 ceramics at megahertz

Colossal Dielectric Permittivity in (al+nb) Co-Doped Ba0.4Sr0.6TiO3 Ceramics

Columbite-rich Multiphase TiO2 Nanoceramic with Superior Mechanical and Dielectric Properties

The Dielectric Properties for (nb,in,b) Co-Doped Rutile TiO2 Ceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Giant Permittivity Up to 100 MHz in La and Nb Co‐doped Rutile TiO2 Ceramics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Enhanced dielectric performance of Niobium and Thulium modified rutile TiO 2 ceramics by defect regulation

Enhanced Dielectric Performance of Niobium and Thulium Modified Rutile TiO2 Ceramics by Defect Regulation

Origin of Colossal Dielectric Permittivity of Rutile Ti0.9In0.05Nb0.05O2: Single Crystal and Polycrystalline

Colossal Permittivity Characteristics of (Nb, Si) Co-Doped TiO2 Ceramics

Good dielectric performance and broadband dielectric polarization in Ag, Nb co‐doped TiO 2

High dielectric permittivity and ultralow dielectric loss in Nb-doped SrTiO 3 ceramics

Crystal structure, Raman spectroscopy and microwave dielectric properties of Ba3.75Nd9.5Ti18-z(Al1/2Nb1/2)zO54 ceramics

The abnormal multiple dielectric relaxation responses of Al3+ and Nb5+ co-doped rutile TiO2 ceramics

Microwave Dielectric Properties of Al-doped Ba4(Sm,Nd)9.33Ti18O54 Ceramics Added with TiO2 and Sintered in Oxygen

Sintering Behavior, Structures and Microwave Dielectric Properties of a Rutile Solid Solution System: (axnb2x)ti1–3xo2 (a=cu, Ni)

High Dielectric Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO3 Ceramics

High-performance colossal permittivity for textured (Al+Nb) co-doped TiO2 ceramics sintered in nitrogen atmosphere

Colossal Permittivity and Ultralow Dielectric Loss in Nb-doped SrTiO 3 Ceramics

Microstructure, Colossal Permittivity, and Humidity Sensitivity of (na, Nb) Co-Doped Rutile TiO2 Ceramics