Design and synthesis of a single ion conducting block copolymer electrolyte with multifunctionality for lithium ion batteries

Yunfeng Zhang,Corina Anrou Lim,Weiwei Cai,Rupesh Rohan,Guodong Xu,Yubao Sun,Hansong Cheng

DOI: https://doi.org/10.1039/c4ra08709g

2014-01-01

RSC Adv.

Abstract:Block copolymer structure generates pores in the single ion conducting electrolyte, which enhance performance of lithium-ion batteries.

What problem does this paper attempt to address?

Simultaneous Improvement of Ionic Conductivity and Mechanical Strength in Block Copolymer Electrolytes with Double Conductive Nanophases.

Xiao-Han Cao,Jun-Huan Li,Mu-Jia Yang,Jia-Liang Yang,Rui-Yang Wang,Xing-Hong Zhang,Jun-Ting Xu

DOI: https://doi.org/10.1002/marc.201900622

IF: 5.006

2020-01-01

Macromolecular Rapid Communications

Abstract:The most daunting challenge of solid polymer electrolytes (SPEs) is the development of materials with simultaneously high ionic conductivity and mechanical strength. Herein, SPEs of lithium bis-(trifluoromethanesulfonyl)imide (LiTFSI)-doped poly(propylene monothiocarbonate)-b-poly(ethylene oxide) (PPMTC-b-PEO) block copolymers (BCPs) with both blocks associating with Li+ ions are prepared. It is found that the PPMTC-b-PEO/LiTFSI electrolytes with double conductive phases exhibit much higher ionic conductivity (2 x 10(-4) S cm(-1) at r.t.) than the BCP electrolytes with a single conductive phase. Concurrently, the storage moduli of PPMTCn-b-PEO44/LiTFSI electrolytes are approximate to 1-4 orders of magnitude higher than that of the neat PEO/LiTFSI electrolytes. Therefore, simultaneous improvement of ionic conductivity and mechanical properties is achieved by construction of a microphase-separated and disordered structure with double conductive phases.
Comprehension-driven design of advanced multi-block single-ion conducting polymer electrolytes for high-performance lithium-metal batteries

Xu Dong,Dominic Bresser

DOI: https://doi.org/10.1016/j.jechem.2024.02.018

IF: 13.1

2024-03-20

Journal of Energy Chemistry

Abstract:Graphical abstract Design and modification of high-performance single-ion conducting polymer electrolytes providing high interfacial stability, enhanced safety, and superior charge transport towards high-energy lithium-metal batteries containing high-voltage, nickel-rich LiNi 1-x-y Co x Mn y O 2 (NCM) cathodes. Download : Download high-res image (107KB) Download : Download full-size image

chemistry, physical,engineering, chemical, applied,energy & fuels
Block copolymer electrolyte with adjustable functional units for solid polymer lithium metal battery

Zhiyuan Lin,Xianwei Guo,Yubo Yang,Mingxue Tang,Qi Wei,Haijun Yu

DOI: https://doi.org/10.1016/j.jechem.2020.04.052

IF: 13.1

2021-01-01

Journal of Energy Chemistry

Abstract:Solid polymer electrolytes have been considered as the promising candidates to improve the safety and stability of high-energy lithium metal batteries. However, the practical applications of solid polymer electrolytes are still limited by the low ionic conductivity, poor interfacial contact with electrodes, narrow electrochemical window and weak mechanical strength. Here, a series of novel block copolymer electrolytes with three-dimensional networks are designed by cross-linked copolymerization of the polyethylene glycol soft segments and hexamethylene diisocyanate trimer hard segments. Their ionic migration performances and interface compatibilities with Li metal anode have been optimized delicately by tailoring the ratio of these functional units. The optimized block copolymer electrolyte has shown an amorphous crystalline structure, a high ionic conductivity of ∼5.7×10−4 S cm−1, high lithium ion transference number (∼0.49), wide electrochemical window up to ∼4.65 V (vs. Li+/Li) and favorable mechanical strength at 55 °C. Furthermore, the enhanced interface compatibility can well support the normal operations of lithium metal batteries using both LiFePO4 and LiNi0.8Co0.15Al0.05O2 cathodes. This study not only paves a new way to develop solid polymer electrolyte with optimizing functional units, but also provides a polymer electrolyte design strategy for the application demand of lithium metal battery.

chemistry, physical,engineering, chemical, applied,energy & fuels
PEO-Based Block Copolymer Electrolytes Containing Double Conductive Phases with Improved Mechanical and Electrochemical Properties

Ze-Kun Zhang,Shi-Peng Ding,Ze Ye,Ding-Li Xia,Jun-Ting Xu

DOI: https://doi.org/10.3390/ma15227930

IF: 3.4

2022-01-01

Materials

Abstract:In this work, the advanced all solid-state block copolymer electrolytes (SBCPEs) for lithium-ion batteries with double conductive phases, poly(ethylene oxide)-b-poly(trimethyl-N-((2-(dimethylamino)ethyl methacrylate)-7-propyl)-ammonium bis(trifluoromethanesulfonyl) imide) (PEO-b-PDM-dTFSI)/LiTFSI, were fabricated, in which the charged PDM-dTFSI block contained double quaternary ammonium cations and the PEO block was doped with LiTFSI. The disordered (DIS) and ordered lamellae (LAM) phase structures were achieved by adjusting the composition of the block copolymer and the doping ratio r. In addition, the presence of the hard PDM-dTFSI block and the formation of the LAM phase structure resulted in a good mechanical strength of the solid PEO-b-PDM-dTFSI/LiTFSI electrolyte, and it could maintain a high level of 104 Pa at 100 °C, which was around 10,000 times stronger than that of the PEO/LiTFSI electrolyte. Based on the good mechanical and electrochemical properties, the PEO-b-PDM-dTFSI/LiTFSI SBCPE exhibited excellent long-term galvanostatic cycle performance, indicating the strong ability to suppress lithium dendrites.
Rapid Ion Conduction Enabled by Synergism of Oriented Liquid Crystals and Electron-Deficient Boron Atoms in Multiblock Copolymer Electrolyte for Advanced Solid-State Lithium-Ion Battery

Qinghui Zeng,Yu Liu,Baerlike Wujieti,Zhenfeng Li,Anqi Chen,Jiazhu Guan,Honghao Wang,Yuchen Jiang,Henghui Zhou,Wei Cui,Shi Wang,Liaoyun Zhang

DOI: https://doi.org/10.1016/j.cej.2024.150298

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Liquid crystals (LCs) with characteristics of self-orientation have exhibited superiorities in construction of ordered ion channels for rapid Li-ion transport. Herein, reversible addition-fragmentation chain transfer (RAFT) polymerization is employed to synthesize a unique type of boron-containing LCs based ABCBA type multiblock copolymers for the first time. The composite block copolymer electrolytes (BCPEs) are fabricated by introducing the copolymer electrolytes into glass fiber separator via solution-casting method. Noteworthily, LCs can not only provide ordered ion channels for efficient ion conduction, but also ameliorate the mechanical strength. Meanwhile, the nitrile groups with high polarity from LCs are able to further facilitate lithium salt dissociation and reinforce electrochemical stability of the system. Crucially, boron elements with electron deficiency can anchor anions and adsorb impurities to endow BCPEs with boosted ion transport capability and sufficient electrochemical stability. Consequently, the well-designed electrolyte shows high ionic conductivity of 1.13 x 10-4 S cm-1 (30 degrees C), and broadened electrochemical stability window of 4.85 V. Impressively, the assembled Li/ LiFePO4 cells and even Li/LiMnxFe1-xPO4 high-voltage cells exhibit remarkable performances. This work provides a synthetic strategy of structure-controlled polymer electrolyte matrix and illustrates that the BCPEs are definitely a category of satisfactory electrolyte candidate for high-performance solid-state lithium-ion batteries.
Block Copolymer Electrolytes for Lithium Metal Batteries: Strategies to Boost both Ionic Conductivity and Mechanical Strength

Tianyi Wang,Lei Zhong,Min Xiao,Dongmei Han,Shuanjin Wang,Zhiheng Huang,Sheng Huang,Luyi Sun,Yuezhong Meng

DOI: https://doi.org/10.1016/j.progpolymsci.2023.101743

IF: 31.281

2023-09-19

Progress in Polymer Science

Abstract:The mechanically hard phase and ionically conductive phase endow suitably designed block copolymer electrolytes (BCPEs) with the "Janus" property, thus providing the opportunity to decouple the trade-off between mechanical strength and ionic conductivity by controlling the phase-separated structures. The conductivity of BCPEs is predominantly determined by the molecular structure of block copolymers and the type and concentration of additives, while the manipulation of phase-separated structures helps strengthen their mechanical support and ion transport. This review article presents an overview of BCPEs and focuses on the "molecular structure-phase structure-property" relationship. Ideally, BCPE membranes should have high-throughput and aligned ion transport channels perpendicular to electrodes. First, given the desired attributes of polymer electrolytes, i.e., high ionic conductivity, high strength, low thickness, and high limiting current density, we summarize the research status and optimization strategies for BCPEs. Second, we present a summary of methods that control the phase behavior of BCPEs based on the phase separation mechanism. Third, BCPEs are classified into dual-ion conductor and single-ion conductor, whose advantages and disadvantages are analyzed. Furthermore, we propose a design rationale for high-performance quasi-solid-state BCPEs. We elaborate polymerization methods for the regulation of molecular and phase structure. These aspects are believed to collectively contribute to BCPE membranes with both high ion-conductivity and high mechanical strength, further boosting the development of safe and high-energy solid-state lithium metal batteries.

polymer science
Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Yihe Wang,Yu Tian,Diana Estevez,Hua-Xin Peng,Faxiang Qin

DOI: https://doi.org/10.1016/j.jpowsour.2021.230127

IF: 9.2

2021-01-01

Journal of Power Sources

Abstract:Solid polymer electrolytes are potential replacement of liquid electrolytes due to their much less flammability and leakage. Among them, poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)-based electrolytes have several advantages including improved processability and electrochemical stability. Unfortunately, poor ionic conductivity and mechanical properties due to high plasticizer concentration hinder their practical applications. Herein, we address these issues by exploiting the solvation effect in the electrolyte through tuning the amount of residual N-methyl-2-pyrrolidone (NMP) and lithium salts. Moreover, by blending with porous carbon (PC) the mechanical integrity of the PVDF-HFP electrolytes is substantially enhanced due to improved interfacial bonding and specific surface area. The appropriate value of electrical conductivity and highly porous morphology of PC also meet the ionic transport and electronic insulation requirements. With the absorbed residual NMP as plasticizer and complexed with Li ions to formLi[NMP](3)(+) , ionic conductivity and amorphicity are improved. By elucidating the solvent and salt concentration interplay, Li-ion conductivity of up to 0.56 mS cm(-,) wide electrochemical window of 5 V versus Li/Li+ and 1000 h of cycling stability (versus Li, 0.2 mA/cm(2)) are obtained. These findings afford a novel electrolyte design guideline for enhancing interfacial compatibility and cycling through hybridization and ion solvation to develop practical lithium batteries.
Regulation of Interphase Layer by Flexible Quasi‐Solid Block Polymer Electrolyte to Achieve Highly Stable Lithium Metal Batteries (Adv. Funct. Mater. 27/2023)

Simin Chai,Zhi Chang,Yue Zhong,Qiong He,Yijiang Wang,Yuanlang Wan,MingYang Feng,Yingzhu Hu,WeiHang Li,Weifeng Wei,Anqiang Pan

DOI: https://doi.org/10.1002/adfm.202370164

IF: 19

2023-07-05

Advanced Functional Materials

Abstract:Triblock Polymer Electrolyte In article number 2300425, Anqiang Pan, Zhi Chang, and co‐workers construct a triblock polyacrylonitrile/polylactic acid‐block‐ethylene glycol polymer as skeleton for gel electrolyte, in which the triblock chain structure and increased electronegative functional groups in extended polymer chains play important roles in directing the transport of Li+ ions and forming compact interface layers.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Influence of Copolymer Chain Sequence on Electrode Latex Binder for Lithium-Ion Batteries

Zhenan Zheng,Xiang Gao,Yingwu Luo

DOI: https://doi.org/10.1007/s00396-019-04548-9

IF: 2.4

2019-01-01

Colloid & Polymer Science

Abstract:Electrode binders have significant influences on lithium-ion battery performance. Good binders should be able to absorb electrolyte to accelerate lithium-ion transport while simultaneously maintaining adequate adhesion and mechanical strength after swelling. Currently, most polymer binders are based on homo or random copolymers so they may only meet one of these requirements, as an improvement in electrolyte swelling ability is detrimental to mechanical strength, and vice versa. This work investigates whether the design of chain sequence can resolve this contradiction. Reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization is employed to synthesize copolymer latex with different chain sequences as electrode binders, which are examined in both LiFePO4 cathode and silicon anodes. The results show a triblock copolymer chain sequence gives the best performance. The microphase separation in triblock copolymer distributes functionalities of electrolyte affinity and strength maintenance into disparate blocks and therefore satisfies both requirements simultaneously. The advantages of triblock chain sequence are demonstrated by superior ionic conductivity, mechanical strength after electrolyte absorption, and lithium-ion diffusion coefficient and then lead to better battery performance compared with random counterpart and commercial aqueous binders.
Semi-Spontaneous Post-Crosslinking Triblock Copolymer Electrolyte for Solid-State Lithium Battery

Zhenan Zheng,Jie Huang,Xiang Gao,Yingwu Luo

DOI: https://doi.org/10.3390/batteries9090465

2023-09-13

Batteries

Abstract:The solid polymer electrolyte is a promising candidate for solid-state lithium battery because of favorable interfacial contact, good processability and economic availability. However, its application is limited because of low ionic conductivity and insufficient mechanical strength. In this study, the delicate molecular structural design was realized via controlled / “living” radical polymerization in order to decouple the trade-off between ionic conductivity and mechanical strength. The random and triblock copolymer electrolytes were designed and synthesized to investigate the influence of molecular structure on ionic conduction, while a chemical cross-linking network was constructed via a semi-spontaneous post-crosslinking reaction. Compared with a random counterpart, the triblock copolymer electrolyte presented stronger chain segment motion and a liquid-like mechanical response due to the independent ion-conducting block, resulting in significantly improved ionic conductivity (from 6.29 ± 1.11 × 10−5 to 9.57 ± 2.82 × 10−5 S cm−1 at 60 °C) and cell performance. When assembled with LiFePO4 and lithium metal electrodes, the cell with triblock copolymer electrolyte showed significantly improved rate performance (150 mAh g−1 at 1 C) and cycling life (200 cycles with 92.8% capacity retention at 1 C). This study demonstrates the advantages of molecular structure regulation on ionic conduction and mechanical support, which may provide new insights for the future design of solid polymer electrolytes.
A Single‐Ion Conducting Network as Rationally Coordinating Polymer Electrolyte for Solid‐State Li Metal Batteries (Adv. Energy Mater. 13/2022)

Hao Li,Yunfei Du,Qi Zhang,Yong Zhao,Fang Lian

DOI: https://doi.org/10.1002/aenm.202270054

IF: 27.8

2022-04-01

Advanced Energy Materials

Abstract:Polymer ElectrolytesIn article number 2103530, Hao Li, Yong Zhao, Fang Lian and co‐workers propose a novel single‐ion conducting network polymer electrolyte (PTF‐4EO) via integrating a LiCTFPB salt with ethylene oxide segments through a crosslinking effect. The unique diamondoid structure enables the fabrication of a PTF‐4EO with a high cation concentration and rational O‐Li+ coordination, and thus possesses a superior lithium ion transference number, high ionic conductivity, excellent electrochemical stability as well as good mechanical stability, thus enabling excellent cycle performance for high voltage cathodes in solid‐state batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Nanostructured block copolymer single-ion conductors for low-temperature, high-voltage and fast charging lithium-metal batteries

Junli Shi,Huu-Dat Nguyen,Zhen Chen,Rui Wang,Dominik Steinle,Lester Barnsley,Jie Li,Henrich Frielinghaus,Dominic Bresser,Cristina Iojoiu,Elie Paillard

DOI: https://doi.org/10.20517/energymater.2023.27

2023-07-21

Energy Materials

Abstract:Herein, a single-ion polymer electrolyte is reported for high-voltage and low-temperature lithium-metal batteries that enables suppressing the growth of dendrites, even at high current densities of 2 mA cm-2. The nanostructured electrolyte was introduced into the cell by mechanically processing the polymer powder via an easily scalable process. Important for the potential application in commercial battery cells is the finding that it does not induce aluminum corrosion at high voltages and leads to low interfacial resistance with lithium metal. These beneficial characteristics, in combination with its high single-ion conductivity and its high anodic stability, allow for the stable cycling of state-of-the-art lithium-ion cathodes, such as NMC111 and NMC622, in combination with a lithium metal anode at 20 °C and even 0 °C for several hundred cycles.
Towards an in-Depth Understanding of Single-Ion Conducting Polymer Electrolytes for Lithium-Metal Batteries

Alexander Mayer,Dominic Bresser

DOI: https://doi.org/10.1149/ma2023-024553mtgabs

2023-12-22

ECS Meeting Abstracts

Abstract:Recently, we have reported a new polyarylene-based single-ion conducting multi-block copolymer electrolyte providing very high ionic conductivities of about 1 mS cm -1 at ambient temperature and excellent cycling stability of LiNMC 811 (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ) cells – even at 0 °C. 1–3 Further improvement of this new electrolyte system, however, requires an in-depth understanding of ideally each single functional unit in the polymer. Herein, we present some of our latest results on the experimental and theoretical investigation of stepwise modified copolymers in order to decipher the impact of the different functional groups on the eventual mechanical, thermal, chemical, and electrochemical behavior. This stepwise modification includes, amongst others, the replacement of the biphenyl unit by a series of bisphenol derivatives and the variation of the ionophobic and ionophilic block. The former approach provides the unique opportunity to investigate the influence of the monomer substitution pattern, while the latter unveils some rather unexpected findings concerning the impact of the lithium concentration in the electrolyte. References H.-D. Nguyen et al., Energy Environ. Sci. , 11 , 3298–3309 (2018). D. Steinle et al., J. Solid State Electrochem. , 26 , 97–102 (2022). Z. Chen et al., Nano Energy , 77 , 105129 (2020).
Novel sulfur-doped single-ion conducting multi-block copolymer electrolyte

Alexander Mayer,Tugce Ates,Alberto Varzi,Stefano Passerini,Dominic Bresser

DOI: https://doi.org/10.3389/fchem.2022.974202

2022-08-23

Abstract:Solid-state lithium batteries are considered one of the most promising candidates for future electrochemical energy storage. However, both inorganic solid electrolytes (such as oxide-based or sulfide-based materials) and polymer electrolytes still have to overcome several challenges to replace the currently used liquid organic electrolytes. An increasingly adopted approach to overcome these challenges relies on the combination of different electrolyte systems. Herein, we report the synthesis and characterization of a novel sulfur-doped single-ion conducting multi-block copolymer (SIC-BCE) system. This SIC-BCE may serve as interlayer between the electrodes and the sulfidic electrolyte such as Li6PS5Cl, thus benefitting of the high ionic conductivity of the latter and the favorable interfacial contact and electrochemical stability of the polymer. The polymer shows excellent ionic conductivity when swollen with ethylene carbonate and allows for stable stripping/plating of lithium, accompanied by a suitable electrochemical stability towards reduction and oxidation. First tests in symmetric Cu|SIC-BCE|Li6PS5Cl|SIC-BCE|Cu cells confirm the general suitability of the polymer to stabilize the electrode|electrolyte interface by preventing the direct contact of the sulfidic electrolyte with, e.g., metallic copper foils.
Multipolar Conjugated Polymer Framework Derived Ionic Sieves via Electronic Modulation for Long‐Life All‐Solid‐State Li Batteries

Xue Yang,Long Fang,Jing Li,Cong Liu,Linfeng Zhong,Fan Yang,Xiaotong Wang,Zishou Zhang,Dingshan Yu

DOI: https://doi.org/10.1002/anie.202401957

2024-03-27

Angewandte Chemie International Edition

Abstract:Here, we build a tunable multipolar conjugated polymer framework platform via pore wall chemistry to probe the role of electronic structure engineering in improving the Li+ conduction by theoretical studies. Guided by theoretical prediction, we develop a new cyano-vinylene-linked multipolar polymer framework namely CNF-COF, acting as efficient ion sieves to modify polymer electrolytes for long-lifespan all-solid-state (ASS) Li metal batteries. The cyano and fluorine groups dual-decoration in CNF-COF favorably regulates the electronic structure via multipolar donor-acceptor electronic effects to afford proper energy band structure and abundant electron-rich sites for enhanced anti-oxidative ability, facilitated ion-pair dissociation and suppressed anion movements. Thus, the CNF-COF incorporation into poly (ethylene oxide) (PEO) electrolytes not only renders selective rapid Li+ conduction but also facilitates the Li dendrite suppression. Specifically, the constructed composite electrolyte with an ultralow CNF-COF content of only 0.5 wt% is endowed with a high ionic conductivity of 0.634 mS cm-1 at 60 °C and a large Li+ transference number of 0.81. As such, the Li symmetric cell delivers stable Li plating/stripping over 1400 h. Impressively, t he assembled ASS Li battery under 60 °C allows for stable cycling over 2000 cycles at 1 C and over 1000 cycles even at 2 C.

chemistry, multidisciplinary
One-Step in Situ Polymerization: A Facile Design Strategy for Block Copolymer Electrolytes

Kairui Guo,Jirong Wang,Zhen Shi,Yong Wang,Xiaolin Xie,Zhigang Xue

DOI: https://doi.org/10.1002/anie.202213606

2022-01-01

Angewandte Chemie International Edition

Abstract:To optimize the rapid transport of lithium ions (Li+) inside lithium metal batteries (LMBs), block copolymer electrolytes (BCPEs) have been fabricated in situ in LMBs via a one-step method combining reversible addition-fragmentation chain transfer (RAFT) polymerization and carboxylic acid-catalyzed ring-opening polymerization (ROP). The BCPEs balanced the Li+ coordination characteristics of the polyether- and polyester-based electrolytes to achieve a rapid Li+ migration in the SPEs. The carboxylic acid played a dual role since it both catalyzed the ROP and stabilized the interface. Furthermore, the in situ assembly of LMBs did effectively enable an efficient intercalation/de-intercalation of Li+ at the electrode/electrolyte interface. The in situ assembled Li/BCPE4/LFP exhibited high-capacity retention of 92% after 400 cycles at 1 C. The one-step in situ fabrication of BCPEs provides a new direction for the design of polymer electrolytes.
Deciphering and Integrating Functionalized Side Chains for High Ion-Conductive Elastic Ternary Copolymer Solid-State Electrolytes for Safe Lithium Metal Batteries

Hongfei Xu,Jinlin Yang,Yuxiang Niu,Xunan Hou,Zejun Sun,Chonglai Jiang,Yukun Xiao,Chaobin He,Shubin Yang,Bin Li,Wei Chen

DOI: https://doi.org/10.1002/anie.202406637

2024-09-02

Abstract:A critical challenge in solid polymer lithium batteries is developing a polymer matrix that can harmonize ionic transportation, electrochemical stability, and mechanical durability. We introduce a novel polymer matrix design by deciphering the structure-function relationships of polymer side chains. Leveraging the molecular orbital-polarity-spatial freedom design strategy, a high ion-conductive hyperelastic ternary copolymer electrolyte (CPE) is synthesized, incorporating three functionalized side chains of poly-2,2,2-Trifluoroethyl acrylate (PTFEA), poly(vinylene carbonate) (PVC), and polyethylene glycol monomethyl ether acrylate (PEGMEA). It is revealed that fluorine-rich side chain (PTFEA) contributes to improved stability and interfacial compatibility; the highly polar side chain (PVC) facilitates the efficient dissociation and migration of ions; the flexible side chain (PEGMEA) with high spatial freedom promotes segmental motion and interchain ion exchanges. The resulting CPE demonstrates an ionic conductivity of 2.19×10-3 S cm-1 (30 °C), oxidation resistance voltage of 4.97 V, excellent elasticity (2700 %), and non-flammability. The outer elastic CPE and the inner organic-inorganic hybrid SEI buffer intense volume fluctuation and enable uniform Li+ deposition. As a result, symmetric Li cells realize a high CCD of 2.55 mA cm-2 and the CPE-based Li||NCM811 full cell exhibits a high-capacity retention (~90 %, 0.5 C) after 200 cycles.
High lithium conductivities in weakly-ionophilic low-dimensional block copolymer electrolytes

J. Liu,Y. Zheng,Y.-P. Liao,D.C. Apperley,G. Ungar,P.V. Wright

DOI: https://doi.org/10.1016/j.electacta.2005.02.066

IF: 6.6

2005-01-01

Electrochimica Acta

Abstract:The structure of amphiphilic low-dimensional copolymer electrolytes I of similar overall composition but prepared by different synthetic procedures X and Y are described. I are copolymers of poly[2,5,8,11,14-pentaoxapentadecamethylene(5-alkyloxy-1,3-phenylene)] (CmO5) and poly[2,-oxatrimethylene(5-alkyloxy-1,3-phenylene)] (CmO1) where the alkyl side chains having m carbons are hexadecyl or mixed dodecyl/octadecyl (50/50). 1H NMR shows that the copolymers have 50% (m=16) or only 18 and 13% of CmO5 units and DSC indicates that the copolymers have ‘block’ sequencing of CmO1 and CmO5 segments. Molecular dynamics modelling indicates that in CmO5 Li+ and BF4− ions are separated by Li+ encapsulation in tetraethoxy segments but in ionophobic CmO1 units the salt is mostly present as neutral aggregates decoupled from the polymer. Conductivities of these microphase-separated mixtures with salt-bridge amphiphilic polyethers II and III of each system are similar. They have low temperature dependence over the range 20°C to 110°C at ∼10−3Scm−1. 7Li NMR linewidth measurements confirm high lithium mobilities at −20°C. A conduction mechanism is proposed whereby Li+ hopping takes place along rows of decoupled aggregates (dimers/quadrupoles) within an essentially block copolymer structure. Subambient measurements to −10°C gave a conductivity of 4×10−5Scm−1.
A fast ionic transport copolymeric network for stable quasi-solid lithium metal battery

Weiqi Mai,Qiaoying Cao,Mingtao Zheng,Yong Xiao,Hang Hu,Yingliang Liu,Yeru Liang

DOI: https://doi.org/10.1016/j.jechem.2023.08.045

IF: 13.1

2023-09-08

Journal of Energy Chemistry

Abstract:Solid-state lithium (Li) metal batteries overwhelm the lithium-ion batteries by harvesting high energy from Li metal anode with ultrahigh capacities and gaining excellent safety from solid electrolytes. However, the uncontrollable solvents in solid electrolytes usually aggravate poor interfacial contact with lithium metal anode and deteriorate Li + pathways. Here a copolymeric network-structured ion conductor by rationally integrating cellulose nanofibril as a two-in-one functional material is employed to anchor the solvent. Taking advantages of tightly anchoring of cellulose nanofibril to solvent, the as-constructed quasi-solid polymer-based electrolyte offers rapid Li + transport channels and realizes effective Li-dendrite suppression, which enables high ionic conductivity of 1.93 × 10 −3 S cm −1 at room temperature, long-term Li plating/stripping over 1900 h, and high capacity retention of 99%. This work provides a fresh strategy for creating solid electrolytes that meet both high ionic conductivity and interfacial stability requirements for practical solid-state lithium metal battery.

chemistry, physical,engineering, chemical, applied,energy & fuels
Influence of chemical microstructure of single-ion polymeric electrolyte membranes on performance of lithium-ion batteries

Yunfeng Zhang,Rupesh Rohan,Weiwei Cai,Guodong Xu,Yubao Sun,An Lin,Hansong Cheng

DOI: https://doi.org/10.1021/am503152m

2014-10-22

Abstract:A novel protocol to generate and control porosity in polymeric structures is presented for fabrication of single ion polymer electrolyte (SIPE) membranes for lithium ion batteries. A series of SIPEs with varying ratios of aliphatic and aromatic segments was successfully synthesized and subsequently blended with PVDF-HFP to fabricate membranes of various sizes of pores. The membranes were characterized using techniques including SEM, solvent uptake capacity measurement and ionic conductivity. We demonstrate that appropriate membrane porosity enhances ionic conductivity, reduces interfacial resistance between electrodes and electrolyte and ultimately boosts performance of Li-ion batteries. The implication of the structure-performance relationship for battery design is discussed.

Design and synthesis of a single ion conducting block copolymer electrolyte with multifunctionality for lithium ion batteries

Simultaneous Improvement of Ionic Conductivity and Mechanical Strength in Block Copolymer Electrolytes with Double Conductive Nanophases.

Comprehension-driven design of advanced multi-block single-ion conducting polymer electrolytes for high-performance lithium-metal batteries

Block copolymer electrolyte with adjustable functional units for solid polymer lithium metal battery

PEO-Based Block Copolymer Electrolytes Containing Double Conductive Phases with Improved Mechanical and Electrochemical Properties

Rapid Ion Conduction Enabled by Synergism of Oriented Liquid Crystals and Electron-Deficient Boron Atoms in Multiblock Copolymer Electrolyte for Advanced Solid-State Lithium-Ion Battery

Block Copolymer Electrolytes for Lithium Metal Batteries: Strategies to Boost both Ionic Conductivity and Mechanical Strength

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Regulation of Interphase Layer by Flexible Quasi‐Solid Block Polymer Electrolyte to Achieve Highly Stable Lithium Metal Batteries (Adv. Funct. Mater. 27/2023)

Influence of Copolymer Chain Sequence on Electrode Latex Binder for Lithium-Ion Batteries

Semi-Spontaneous Post-Crosslinking Triblock Copolymer Electrolyte for Solid-State Lithium Battery

A Single‐Ion Conducting Network as Rationally Coordinating Polymer Electrolyte for Solid‐State Li Metal Batteries (Adv. Energy Mater. 13/2022)

Nanostructured block copolymer single-ion conductors for low-temperature, high-voltage and fast charging lithium-metal batteries

Towards an in-Depth Understanding of Single-Ion Conducting Polymer Electrolytes for Lithium-Metal Batteries

Novel sulfur-doped single-ion conducting multi-block copolymer electrolyte

Multipolar Conjugated Polymer Framework Derived Ionic Sieves via Electronic Modulation for Long‐Life All‐Solid‐State Li Batteries

One-Step in Situ Polymerization: A Facile Design Strategy for Block Copolymer Electrolytes

Deciphering and Integrating Functionalized Side Chains for High Ion-Conductive Elastic Ternary Copolymer Solid-State Electrolytes for Safe Lithium Metal Batteries

High lithium conductivities in weakly-ionophilic low-dimensional block copolymer electrolytes

A fast ionic transport copolymeric network for stable quasi-solid lithium metal battery

Influence of chemical microstructure of single-ion polymeric electrolyte membranes on performance of lithium-ion batteries