Abstract:Polyethylene terephthalate (PET) is one of the most widely used raw materials in chemical industry. Chemical recycling of the waste PET is a sustainable way not only considering the economic benefit but also the environmental goals. This paper focused on the effects among three foremost variables (methanolysis temperature, time, and mass ratio of methanol (MeOH) to PET), established a mathematical model depicted the complete effects of the parameters on the process, and sought the optimal solution of this PET methanolysis reaction. Response surface methodology (RSM) was used to model and analysis the recycling process of dimethyl terephthalate (DMT) from waste PET under supercritical methanol conditions. Methanolysis temperature and time could increase the DMT yield. Mass ratio of MeOH to PET hardly affected DMT yield when the methanol is excess. Different operation parameters including reaction temperature (240-320 degrees C), reaction time (15-120 min), and MeOH to PET mass ratio (6:1-10:1) were modeled and optimized using RSM. The quadratic equation with mathematical transformation (square root) modified was established for predicting the DMT yield and evaluated the validity on the basic of ahalysis of variance (ANOVA). The result indicated that the MeOH to PET mass ratio and relative term exhibit a less significant influence on the response surface in comparison to reaction temperature and time in the range of the experiment conditions. Prediction made by the developed model was in reasonably good agreement with the test runs. Under the optimal condition, the yield of DMT reached 99.79% which was much closer to the extent of the complete reaction. (C) 2015 Elsevier B.V. All rights reserved.

Modeling Mechanochemical Depolymerization of PET in Ball-Mill Reactors Using DEM Simulations

Modeling of an Industrial Polycondensation Process for Polyethylene Terephthalate

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Highly efficient kilogram-scale mechanochemical catalytic depolymerization of PET polyester waste into reusable monomers

Kinetic Phenomena in Mechanochemical Depolymerization of Poly(styrene)

Thermodynamic limits of the depolymerization of poly(olefin)s using mechanochemistry

Selective depolymerization of PET to monomers from its waste blends and composites at ambient temperature

Modeling and Optimizing of Producing Recycled PET from Fabrics Waste Via Falling Film-Rotating Disk Combined Reactor

Partial glycolytic depolymerisation of poly(ethylene terephthalate) (PET) in the solid state: Modelling the contribution of time and temperature

Understanding Rapid PET Degradation via Reactive Molecular Dynamics Simulation and Kinetic Modeling

Assessment of PET Depolymerization Processes for Circular Economy. 1. Thermodynamics, Chemistry, Purification, and Process Design

Chemical Recycling of Polycarbonate and Polyester without Solvent and Catalyst: Mechanochemical Methanolysis

Mechanochemistry Milling of Waste Poly(Ethylene Terephthalate) into Metal-Organic Frameworks.

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Impact of Ball Milling on the Microstructure of Polyethylene Terephthalate

Depolymerization mechanisms and closed-loop assessment in polyester waste recycling

Development of a continuous PET depolymerization process as a basis for a back-to-monomer recycling method

Modular Nano-Scaffold Biocatalysis for Superior PET Depolymerization and Valorization

Integrating experimental and computational approaches for deep eutectic solvent-catalyzed glycolysis of post-consumer polyethylene terephthalate

Electrochemically mediated alkaline hydrolysis and methanolysis of poly(ethylene terephthalate) (PET)

Investigating and Modeling PET Methanolysis under Supercritical Conditions by Response Surface Methodology Approach