Abstract:Less than 5% of polystyrene is recycled, motivating a search for energy efficient and economical methods for polystyrene recycling that can be deployed at scale. One option is chemical recycling, consisting of thermal depolymerization and purification to produce monomer-grade styrene (>99%) and other co-products. Thermal depolymerization and distillation are readily scalable, well-established technologies; however, to be considered practical, they must be thermodynamically efficient, economically feasible, and environmentally responsible. Accordingly, mass and energy balances of a pyrolysis reactor for thermal depolymerization and two distillation columns to separate styrene from α-methyl styrene, styrene dimer, toluene, and ethyl benzene co-products, were simulated using ASPEN to evaluate thermodynamic and economic feasibility. These simulations indicate that monomer-grade styrene can be recovered with energy inputs <10MJ/kg, comparable to the energy content of pyrolysis co-products. Thermodynamic sensitivity analysis indicates the scope to reduce these values and enhance the robustness of the predictions. A probabilistic economic analysis of multiple scenarios combined with detailed sensitivity analysis indicates that the cost for recycled styrene is approximately twice the historical market value of fossil-derived styrene when styrene costs are fixed at 15% of the total product cost or less than the historical value when feedstock costs are assumed to be zero. A Monte Carlo and Net Present Value-based economic performance analysis indicates that chemical recycling is economically viable for scenarios assuming realistic feedstock costs. Furthermore, the CO 2 abatement cost is roughly $1.5 per ton of averted CO 2 , relative to a pyrolysis process system to produce fuels. As much as 60% of all polystyrene used today could be replaced by chemically recycled styrene, thus quantifying the potential benefits of this readily scalable approach.

Kinetic Phenomena in Mechanochemical Depolymerization of Poly(styrene)

New Sustainable Polymers with On-Demand Depolymerization Property

Chemical Recycling of Polyolefin Waste: from the Perspective of Efficient Pyrolysis Reactors

Thermodynamic limits of the depolymerization of poly(olefin)s using mechanochemistry

Modeling Mechanochemical Depolymerization of PET in Ball-Mill Reactors Using DEM Simulations

Chemical Recycling of Polycarbonate and Polyester without Solvent and Catalyst: Mechanochemical Methanolysis

Liquid-Assisted Grinding Enables a Direct Mechanochemical Functionalization of Polystyrene Waste

Hybrid Chemomechanical Plastics Recycling: Solvent-free, High-Speed Reactive Extrusion of Low-Density Polyethylene

Mechanochemically Accelerated Deconstruction of Chemically Recyclable Plastics

Magnetic resonance insights into the heterogeneous, fractal-like kinetics of chemically recyclable polymers

Depolymerization of plastics by means of electrified spatiotemporal heating

Leveraging mechanochemistry for sustainable polymer degradation

Mechanochemically Promoted Functionalization of Postconsumer Poly(Methyl Methacrylate) and Poly(α-Methylstyrene) for Bulk Depolymerization

Light-Driven Polymer Recycling to Monomers and Small Molecules

Disequilibrating Dynamic Polymers for Spontaneous Recyclability

Deconstruction of Polymers through Olefin Metathesis

Thermodynamic and economic analysis of a deployable and scalable process to recover Monomer-Grade styrene from waste polystyrene

Highly efficient kilogram-scale mechanochemical catalytic depolymerization of PET polyester waste into reusable monomers