Abstract:The stability of perovskite solar cells under operation is a critical challenging issue, especially under extreme temperatures or temperature variations. Perovskite solar cells have been reported to retain the initial efficiency over just 200–300 thermal cycles between –40 to 85 °C — the standard testing protocol for thermal cycling. The rapid degradation has been largely attributed to mechanical residual stresses within the multilayer device stacks. Most studies have focussed on stress relief by improving the interfaces in the devices, which are known to be prone to delamination, or the cell's encapsulation. Less attention has been paid to the perovskite layer. Now, Min Chen, Joseph Luther and colleagues across the United States and Switzerland show that the minimization of residual strain in the perovskite affords better stability against thermal cycling stresses. The researchers add an alkyl ammonium additive — n -octylammonium iodide — into the perovskite precursor solution. Upon annealing, the ammonium molecules distribute at grain boundaries and interfaces, suppressing residual tensile strain in the perovskite film. This translates into solar cells with improved stability against thermal cycling. The initial efficiency is retained over 500 cycles, when the time to complete each cycle is 6 hours, and over 2,500 cycles in accelerated tests in which each cycle lasts 5 minutes. The research team shows that stability is enhanced for different device designs and both in cells and modules, confirming the reproducibility of the approach. By analysing the devices after the stressing test, Chen et al. demonstrate that the perovskite film with reduced tensile strain has fewer cracks and is less prone to delamination, ensuring more stable devices. Future work can build on stress engineering of the perovskite film and other existing strategies for interfaces and encapsulation to further improve the stability of perovskite solar cells against thermal stresses.

Long-chain anionic surfactants enabling stable perovskite/silicon tandems with greatly suppressed stress corrosion

Stability-enhanced perovskite heterointerfaces and solar cells via strongly anchored and sterically hindered ligands

Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain

Reconstructing Subsurface Lattice for Stable Perovskite Photovoltaics

Efficient and Stable of Perovskite Solar Cells

Planar perovskite solar cells with long-term stability using ionic liquid additives

Long-term stability in perovskite solar cells through atomic layer deposition of tin oxide

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts

Stress compensation based on interfacial nanostructures for stable perovskite solar cells

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Steric Impediment of Ion Migration Contributes to Improved Operational Stability of Perovskite Solar Cells

A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability

Improved Absorber Phase Stability, Performance, and Lifetime in Inorganic Perovskite Solar Cells with Alkyltrimethoxysilane Strain-Release Layers at the Perovskite/TiO<sub>2</sub> Interface

Multifunctional molecules of surfactant to support enhanced efficiency and stability for perovskite solar cells

Surface Reaction Induced Compressive Strain for Stable Inorganic Perovskite Solar Cells

Dual‐Surface Polydentate Anchoring Enabled Strain Regulation for Stable and Efficient Perovskite Solar Cells

Relieving stress for stability

Local nearly non-strained perovskite lattice approaching a broad environmental stability window of efficient solar cells

Impeded Degradation of Perovskite Solar Cells Via the Dual Interfacial Modification of Siloxane

Aqueous solvent-regulated crystallization and interfacial modification in perovskite solar cells with enhanced stability and performance