Abstract:Purpose In vitro patient-specific flexible vascular models are helpful for understanding the haemodynamic changes before and after endovascular treatment and for effective training of neuroendovascular interventionalists. However, it is difficult to fabricate models of overall unified or controllable thickness using existing manufacturing methods. In this study, we developed an improved and easily implemented method by combining 3D printing and brush-spin–coating processes to produce a transparent silicone model of uniform or varied thickness. Methods First, a water-soluble inner-skeleton model, based on clinical data, was printed on a 3D printer. The skeleton model was subsequently fixed in a single-axis-rotation machine to enable continuous coating of silicone, the thickness of which was manually controlled by adsorption and removal of excess silicone in a brush-spinning operation. After the silicone layer was solidified, the inner skeleton was further dissolved in a hot water bath, affording a transparent vascular model with real geometry. To verify the controllability of the coating thickness by using this method, a straight tube, an idealised aneurysm model, a patient-specific aortic arch model, and an abdominal aortic aneurysm model were manufactured. Results The different thicknesses of the manufactured tubes could be well controlled, with the relative standard deviations being 5.6 and 8.1% for the straight and aneurysm tubes, respectively. Despite of the diameter changing from 33 to 20 mm in the patient-specific aorta, the thickness of the fabricated aortic model remains almost the same along the longitudinal direction with a lower standard deviation of 3.1%. In the more complex patient-specific abdominal aneurysm model, varied thicknesses were realized to mimic the measured data from the CT images, where the middle of the aneurysm was with 2 mm and abdominal aorta as well as the iliac arteries had the normal thickness of 2.3 mm. Conclusion Through the brush–spin–coating method, models of different sizes and complexity with prescribed thickness can be manufactured, which will be helpful for developing surgical treatment strategies or training neuroendovascular interventionalists.

3D bioprinting of neurovascular tissue modeling with collagen‐based low‐viscosity composites

3D Bioprinting of Neurovascular Tissue Modeling with Collagen‐Based Low‐Viscosity Composites (Adv. Healthcare Mater. 25/2023)

Coaxial 3D Bioprinting of Organ Prototyps from Nutrients Delivery to Vascularization

Directly Coaxial 3D Bioprinting of Large-Scale Vascularized Tissue Constructs.

Two-step Method Fabricating a 3D Nerve Cell Model with Brain-Like Mechanical Properties and Tunable Porosity Vascular Structures Via Coaxial Printing

3D Bioprinted Hyaluronic Acid-Based Cell-Laden Scaffold for Brain Microenvironment Simulation

Biomimetic design and integrated biofabrication of an in-vitro three-dimensional multi-scale multilayer cortical model

Biomimetic Design and Integrated Biofabrication of an In-Vitro Three-Dimensional Multiscale Multilayer Cortical Model

Coaxial Electrohydrodynamic Bioprinting of Pre-vascularized Cell-laden Constructs for Tissue Engineering

Single-Step 3D Bioprinting of Alginate-Collagen Type I Hydrogel Fiber Rings to Promote Angiogenic Network Formation

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

A Novel Method for Generating 3D Constructs with Branched Vascular Networks Using Multi-Materials Bioprinting and Direct Surgical Anastomosis

Coaxial Cell Printing of Freestanding, Perfusable, and Functional in Vitro Vascular Models for Recapitulation of Native Vascular Endothelium Pathophysiology

3D bioprinting microgels to construct implantable vascular tissue

Coaxial 3D Bioprinting Process Research and Performance Tests on Vascular Scaffolds

Synthesis of Easily-Processable Collagen Bio-Inks Using Ionic Liquid for 3D Bioprinted Liver Tissue Models with Branched Vascular Networks

3D Coaxial Bioprinting of Vasculature.

3D bioprinting and microscale organization of vascularized tissue constructs using collagen-based bioink

Three-Dimensional Bioprinting Of Perfusable Hierarchical Microchannels With Alginate And Silk Fibroin Double Cross-Linked Network

In Vitro and in Vivo Evaluation of 3D Bioprinted Small-Diameter Vasculature with Smooth Muscle and Endothelium.

A Brush–Spin–Coating Method for Fabricating in Vitro Patient-Specific Vascular Models by Coupling 3D-Printing