Abstract:Vascularization is essential for the regeneration of three-dimensional (3D) bioprinting organs. As a general method to produce microfluidic channels in 3D printing constructs, coaxial extrusion has attracted great attention. However, the biocompatible bioinks are very limited for coaxial extrusion to fabricate microchannels with regular structure and enough mechanical properties. Herein, a hybrid bioink composed of alginate (Alg) and silk fibroin (SF) was proposed for 3D bioprinting of microchannel networks based on coaxial extrusion. The rheological properties of the bioink demonstrated that the hybrid Alg/SF bioink exhibited improved viscosity and shear thinning behavior compared with either pure Alg or SF bioink and had similar storage and loss modulus in a wide range of shear frequency, indicating a sound printability. Using a coaxial extrusion system with calcium ions and Pluronic F127 flowing through the core nozzle as cross-linkers, the Alg/SF bioink could be extruded and deposited to form a 3D scaffold with interconnected microchannels. The regular structure and smooth pore wall of microchannels inside the scaffold were demonstrated by optical coherence tomography. Micropores left by the rinse of F127 were observed by scanning electron microscope, constituting a hierarchical structure together with the microchannels and printed macropores. Fourier transform infrared spectroscopy analysis proved the complete rinse of F127 and the formation of beta-sheet SF structure. Thus, Alg/SF could form a double cross-linked network, which was much stronger than the pure Alg network. Moreover, cells in the Alg/SF scaffold showed higher viability and proliferation rate than in the Alg scaffold. Therefore, Alg/SF is a promising bioink for coaxial extrusion-based 3D bioprinting, with the printed microchannel network beneficial for complex tissue and organ regeneration.

Coaxial 3D Bioprinting Process Research and Performance Tests on Vascular Scaffolds

Coaxial 3D Bioprinting of Organ Prototyps from Nutrients Delivery to Vascularization

3D-Printed Tortuous Vessels with Photodissociable and Morphology-Controllable Ink.

Directly Coaxial 3D Bioprinting of Large-Scale Vascularized Tissue Constructs.

3D Coaxial Bioprinting of Vasculature.

Coaxial Nozzle-Assisted 3D Bioprinting with Built-in Microchannels for Nutrients Delivery.

Coaxial Electrohydrodynamic Bioprinting of Pre-vascularized Cell-laden Constructs for Tissue Engineering

A Biological 3D Printer for the Preparation of Tissue Engineering Micro-Channel Scaffold

Three-Dimensional Bioprinting Of Perfusable Hierarchical Microchannels With Alginate And Silk Fibroin Double Cross-Linked Network

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

Bioprinting of Coaxial Multicellular Structures for a 3D Co-Culture Model

Freestanding vascular scaffolds engineered by direct 3D printing with Gt-Alg-MMT bioinks

Engineering gelatin-based alginate/carbon nanotubes blend bioink for direct 3D printing of vessel constructs

Formation of Stable Vascular Networks by 3D Coaxial Printing and Schiff-Based Reaction

Novel Compound-Forming Technology Using Bioprinting and Electrospinning for Patterning A 3d Scaffold Construct with Multiscale Channels

The Research on Multi-Material 3D Vascularized Network Integrated Printing Technology

Microfluidic Printing of Tunable Hollow Microfibers for Vascular Tissue Engineering.

A Versatile Method for Fabricating Tissue Engineering Scaffolds with a Three-Dimensional Channel for Prevasculature Networks

3D Bioprinting for Vascularization

In Vitro and in Vivo Evaluation of 3D Bioprinted Small-Diameter Vasculature with Smooth Muscle and Endothelium.

A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair