Abstract:The deterioration process and deterioration mechanism of magnesium oxychloride cement (MOC) in an alkaline environment were studied using a scanning electron microscope (SEM), an X-ray diffractometer (XRD), a Fourier transform infrared spectrometer (FT-IR) and a micro-electro-hydraulic servo pressure testing machine to investigate the effects of soaking time in 10 wt.% NaOH solution on the macro- and micro-morphology, phase composition and compressive strength of MOC samples. The results show that the deterioration of MOC samples under an alkaline environment is mainly caused by the alkaline environment providing more OH- ions, which can react with 5Mg(OH)2·MgCl2·8H2O (P 5) in the sample. The resulting reaction gives rise to a faster decomposition of 5Mg(OH)2·MgCl2·8H2O (P 5) and a substantial reduction in the strength of the sample, and finally leads to a gradual deterioration of MOC samples. Meanwhile, immersion time exhibits a significant effect on MOC samples. The extension of immersion time coincides with more OH- ions entering the sample, and the greater presence of OH ions increases the likelihood that more P 5 will produce a hydrolysis reaction, further resulting in the increased deterioration of the sample. After soaking for 6 h in alkaline media, the main phase composition of the surface layer of an MOC sample changes to MgO and Mg(OH)2, and its microscopic morphology is also dominated by round sheets, giving rise to a sharp decrease in its compressive strength (52.2%). When the immersion time is prolonged to 72 h, OH- ions have already immersed into the inner core of the sample, causing the disappearance of P 5 from the whole sample. At the same time, both the surface and inner core of the sample exhibit a disc-shaped morphology, and chalking phenomena also appear on the surface of the sample. This reduces the compressive strength of the sample to 13.5 MPa, only 20% of its compressive strength in water. The compressive strength of the sample after 120 h of immersion is as low as 8.6 MPa, which is lower than that of the sample dipped in water for 21 days (9.5 MPa). As a result, the MOC samples studied in alkaline environments exhibit a faster deterioration rate, mainly because of a faster hydrolysis reaction by P 5, caused by more OH- ions.

Characteristics of the corrosion products of steel bars in modified magnesium oxysulfide cement containing chloride salts

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

Chemical Composition of Corrosion Products of Rebar Caused by Carbonation and Chloride

Effects of steel slag on the properties and microstructure of magnesium oxysulfate cement prepared by magnesium desulfurization byproducts

Degradation Mechanisms of Chloride Contaminated Cast-in-Situ Concrete Partially Exposed to Magnesium-Sulfate Combined Environment

Atmospheric chloride-induced corrosion of steel-reinforced concrete beam exposed to real marine-environment for 7 years

Electrochemical behavior of steel bars in magnesium phosphate cement

Molecular Dynamics Simulation of Reinforcing Steel Corrosion when Subjected to Both Chloride Attack and Mechanical Loading

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Effect of Ion Corrosion on 517 Phase Stability

Alteration mechanisms of carbonated steel slag product under hydrochloric acid attack

Study on the Stability of Low-Carbon Magnesium Cementitious Materials in Sulfate Erosion Environments

Characterization of magnesium-calcium oxysulfate cement prepared by replacing MgSO4 in magnesium oxysulfate cement with untreated desulfurization gypsum

Microscopic Analysis of Steel Corrosion Products in Seawater and Sea-Sand Concrete

Corrosion behavior of reinforcing bar in magnesium phosphate cement based on polarization curve

Study on the Deterioration Mechanism of Magnesium Oxychloride Cement under an Alkaline Environment

Study on Concrete Deterioration and Chloride Ion Diffusion Mechanism by Different Aqueous NaCl-MgSO4 Concentrations

Degradation characteristics of Portland cement mortar incorporating supplementary cementitious materials under multi-ions attacks and drying-wetting cycles

Degradation progress of Portland cement mortar under the coupled effects of multiple corrosive ions and drying-wetting cycles

Corrosion of Steel Fibers in Chloride-Contaminated Simulated Concrete Pore Solutions

Corrosion products of low-alloy steel bars and their induction of cracking in seawater sea-sand concrete cover