Degradation progress of Portland cement mortar under the coupled effects of multiple corrosive ions and drying-wetting cycles

Shukai Cheng,Zhonghe Shui,Xu Gao,Jianxin Lu,Tao Sun,Rui Yu
DOI: https://doi.org/10.1016/j.cemconcomp.2020.103629
IF: 9.93
2020-08-01
Cement and Concrete Composites
Abstract:<p>Concrete structures serving in the marine tidal zone usually suffer the most severe degradations due to multiple ions attacks and drying-wetting cycles. This study systematically investigates the influence of multiple ions presented in the seawater on the degradation process of Portland cement mortar under drying-wetting cycles. The interactions between sulfate (SO<sub>4</sub><sup>2-</sup>) and magnesium (Mg<sup>2+</sup>) on the chloride diffusion and damage behaviors of cement mortar were determined. The results show that the SO<sub>4</sub><sup>2-</sup> and SO<sub>4</sub><sup>2-</sup>+ Mg<sup>2+</sup> in composite solution firstly decrease the chloride ingress and then increase the chloride diffusion, while the presence of Mg<sup>2+</sup> increases the chloride diffusion of mortar samples regardless of the exposure to the NaCl + MgCl<sub>2</sub> or NaCl + MgCl<sub>2</sub>+Na<sub>2</sub>SO<sub>4</sub> solution, and rich Mg<sup>2+</sup> is found at the outer layer. The existence of SO<sub>4</sub><sup>2-</sup> and SO<sub>4</sub><sup>2-</sup>+ Mg<sup>2+</sup> in multiple ions solutions accelerates the degradation progress, whereas the single Mg<sup>2+</sup> has negligible effect on the damages of samples. The phase compositions highlight that the Mg<sup>2+</sup>+SO<sub>4</sub><sup>2-</sup> in chloride solution increases consumption of portlandite and causes the decalcification of C–S–H, thus aggravating the degradations of mortar. These phase changes are generally agreed with the predictions of a thermodynamic model. Moreover, the microstructure analysis reveals that the presence of Mg<sup>2+</sup>+SO<sub>4</sub><sup>2-</sup> coarsens pore structure of matrix and induces a higher porosity, which further accelerates the ingress of corrosive ions.</p>
construction & building technology,materials science, composites
What problem does this paper attempt to address?