Abstract:Abstract Polymer coatings are commonly used to protect carbon steels from corrosion but they are susceptible to weathering and many of them have environmental concerns. Therefore, we studied the possibility of an environmentally favorable inorganic magnesium phosphate cement (MPC) coating for protecting mild steel. A formulation suitable for coating steel was developed by compositional modification [i.e., incremental replacement of dead-burned magnesia (MgO) with magnesium hydroxide (Mg(OH) 2 )] to a road-repair MPC. This modification yielded an acceptable working time and prevented pore formation at the coating-steel interface. Corrosion monitoring by linear polarization and electrochemical impedance spectroscopy for 14 days found that, the MPC coating substantially increased the linear polarization resistance (R p ) [e.g., day 1: (8.2 ± 1.7) × 10 3 (nadir value) vs. 495 ± 55 Ω cm −2 ] and charge transfer resistance (R ct ) (e.g., day 1: 9.3 × 10 3 vs. 3.8 × 10 2 Ω cm −2 ). The coated steel underwent neutral sodium chloride (NaCl) salt spray for 2400 h without visible rusting. Immersion for 24 h in liquids simulating the pore fluid indicated that, passivation by the excess MgO in the coating was a major contributor to its anti-corrosive property. Tafel polarization in the liquids found that, corrosion current density (I corr ) followed the rank: 3.5% NaCl solution (6.0 μA cm −2 ) > 3.5% NaCl solution containing MgO (3.6 μA cm −2 ) > 3.5% NaCl solution containing fragmented MPC (1.7 μA cm −2 ), suggesting that a physical barrier effect and dissolved phosphate ions improved its protection. This study shows that, MPC coating is a promising durable and environmentally favorable anti-corrosive material for protecting steel structures in some applications.

Corrosion behavior of reinforcing bar in magnesium phosphate cement based on polarization curve

Electrochemical behavior of steel bars in magnesium phosphate cement

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Analysis of Polarization Curves Characteristics of Rebar in Concrete

Research on Reinforcement Corrosion in Concrete by Using Electrochemical Frequency Modulation Technology

Strength and Leaching Characteristics of Magnesium Phosphate Cement-Solidified Zinc- Contaminated Soil under the Effect of Acid Rain

Research on the Chloride Ion Penetration Resistance of Magnesium Phosphate Cement (MPC) Material as Coating for Reinforced Concrete Structures

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

Electrochemical Impedance Spectroscopy Characteristics of Corrosion Behavior of Rebar in Concrete

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Mechanical Performance of Corroded Steel Bars in Concrete

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Inorganic Acid Resistance Performances of Magnesium Phosphate Cement: A Two-Year Observation

Anti-Corrosion Performance of Magnesium Potassium Phosphate Cement Coating on Steel Reinforcement: The Effect of Boric Acid

Study on Bonding Performance of Magnesium Phosphate Cement Mortar in Chloride Corrosion Environment

Electrochemical Corrosion Behavior of Carbon Steel Reinforcement in Concrete Containing Limestone and Mesoporous Silica Nanoparticles under Acidic Environment

Environmentally favorable magnesium phosphate anti-corrosive coating on carbon steel and protective mechanisms

Steel Corrosion Behavior of Reinforced Calcium Aluminate Cement-Mineral Additions Modified Mortar