Abstract:In this research, the thermomechanical fatigue (TMF) characteristics of a second-generation Ni-based single-crystal superalloy were investigated. The combined effects of temperature cycling and mechanical stress were examined using a strain-controlled approach under different TMF testing conditions. The results indicated that cyclic softening occurred during the early stages during in-phase (IP) loading. In contrast, out-of-phase (OP) tests exhibited cyclic hardening, as evidenced by an increase in the stress range, which intensified at higher mechanical strain amplitudes. This resulted in a shorter fatigue life compared to the IP TMF case. The crack distribution patterns and damage mechanisms on the cross-sectional and fracture surfaces of the failed specimens were analyzed. In the OP TMF tests, oxidation-assisted cracking was identified as the primary damage mechanism. The dominance of oxide layers was a key distinguishing feature. Additionally, twinning-related deformation and topologically close-packed (TCP) phase particles were observed in specimens subjected to a higher mechanical strain of 0.6%, where they ran parallel to the main crack, contributing to a reduction in lifetime. Conversely, the IP TMF cases were mainly dominated by creep damage mechanisms, with some signs of oxidation penetration observed during testing. The application of the Ostergren model to the fatigue life prediction of a Ni-based single-crystal superalloy under both conditions was evaluated. As this model was insufficient, a modified Ostergren model was proposed by incorporating the maximum and amplitude stresses in the power law forms.

Investigation of damage mechanisms in thermomechanical fatigue of nickel-based single-crystal alloys

Investigation of fatigue mesoscopic mechanical properties of a nickel-based superalloy by instrumented microindentation measurements

Anisotropic Thermomechanical Fatigue of a Nickel-Base Single-Crystal Superalloy Part I: Effects of Crystal Orientations and Damage Mechanisms

Deformation behavior and crack mechanism of a first generation single-crystal Ni-based superalloys under thermomechanical fatigue loading

Molecular dynamics simulation of thermomechanical fatigue properties of Ni-based single crystal superalloys

Thermomechanical Fatigue of Nickel-Based Single-Crystal Superalloys

Effects of creep and oxidation to thermomechanical fatigue life assessment for nickel-based superalloy

Comparison of fatigue characteristics and failure analysis of Ni-based superalloy subjected to thermomechanical fatigue under different phase conditions

Thermo-Mechanical Creep-Fatigue Damage Evolution and Life Assessment of TiAl Alloy

Effects of temperature gradients on thermomechanical fatigue of nickel-based superalloy

Assessment of Thermo-Mechanical Fatigue in a Nickel-Based Single-Crystal Superalloy CMSX-4 Accounting for Temperature Gradient Effects

Evolution of fatigue mechanical properties and micro defects in nickel-based single crystal superalloys: A molecular dynamics research

Thermomechanical fatigue behavior and failure mechanism of a nickel-based directional solidification column crystal superalloy

Change in Failure Behavior and Fatigue Life of Single-Crystal Ni-Based Superalloys Under Thermomechanical Fatigue Loading

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A critical-plane-based thermomechanical fatigue lifetime prediction model and its application in nickel-based single-crystal turbine blades

Life Assessment of Multiaxial Thermomechanical Fatigue of a Nickel-Based Superalloy Inconel 718

Thermo-mechanical Fatigue Deformation and Fracture Mechanisms of Nickel-Based Powder Metallurgy Superalloy

Thermo-mechanical fatigue crack growth in a nickel-based powder metallurgy superalloy

Thermomechanical Fatigue Experiment and Failure Analysis on a Nickel-Based Superalloy Turbine Blade

A modified damage-coupled viscoplastic constitutive model for capturing the asymmetric behavior of a nickel-based superalloy under wide creep-fatigue loadings