Abstract:With the dramatic increase in CO 2 emissions over the last few decades and the subsequent rise in global temperatures leading to climate change, substantial efforts have been directed towards the development of materials designed for the direct capture of CO 2 from the atmosphere, a process known as direct air capture (DAC). DAC stands out as one of the primary negative emission technologies (NETs) expected to play a pivotal role in achieving negative CO 2 emissions. However, most of the reported sorbent performances have been focused on ambient temperatures (around 25 °C) or higher, specifically under dry conditions, with very few exceptions. This limitation has posed a significant obstacle to the widespread deployment of DAC, as a substantial portion of the world experiences sub-ambient temperatures and non-zero humidity levels. In this study, we evaluate the in-situ cationic ring-opening polymerization of three different 2-oxazolines monomers initiated by CPTMS or IPTMS, which are chemically tethered to mesoporous silica foam and large-pore alumina-silica supports and their performance for CO 2 capture under various conditions. Among all combinations of supports, initiators, and monomers, the MSF-C-EtOX sorbent demonstrated exceptional utilization of the support, initiator, and monomer properties, resulting in superior CO 2 uptakes under various conditions. The optimum adsorption temperature at dry condition was found to be 40°C, achieving a CO 2 uptake of 1.72 mmol/g. Further testing under sub-ambient dry adsorption conditions at -20°C showed a CO 2 capacity of 0.80 mmol/g. The introduction of moisture significantly enhanced CO 2 uptakes, reaching 2.45 mmol/g at 20 °C. Under humid conditions, the sorbent exhibited robust performance at low temperatures, with CO 2 uptakes of 1.88 and 1.40 mmol/g at 0°C and -20°C, respectively. Importantly, the sorbent demonstrated stable cyclic capacity over 10 and 50 cycles under humid and dry conditions, respectively. The findings presented in this study suggest that supported in-situ polymerized amines are promising materials for DAC under ambient-temperature and low-temperature conditions. There are additional prospects for fine-tuning these materials to facilitate the large-scale implementation of DAC facilities in diverse environmental conditions.

Photo-thermal CO 2 desorption from amine-modified silica / carbon aerogel for direct air capture

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Temperature-vacuum Swing Adsorption for Direct Air Capture by Using Low-Grade Heat

Direct Air Capture of CO2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

The amine-functionalized alumina captures CO 2 directly from the ambient air in the Rotating Adsorption Bed

Solar-assisted Temperature Vacuum Swing Adsorption for Direct Air Capture: Effect of Relative Humidity

Ambient and sub-ambient temperature direct air CO2 capture (DAC) by novel supported in-situ polymerized amines

Development of sorbent materials for direct air capture of CO2

Design of Amine-Functionalized Layered Double Oxide Nanosheets with Efficient CO2 Capture Capacities from Ambient Air, Ultrafast Kinetics, and Promising Stability

Comparative analysis of amine-functionalized silica for direct air capture (DAC): Material characterization, performance, and thermodynamic efficiency

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Toward the feasible direct air capture of carbon dioxide with molecular sieves by water management

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Unidirectional Ice-Templating for Aerogel Adsorbents: Excellent Pore Structure and High CO2 Capture Performance for Direct Air Capture

Feasibility and Effectivity of an Amine-Grafted Alumina Adsorbent for Direct Air Capture.

Nanosilica polyamidoamine dendrimers for enhanced direct air CO2 capture

Direct Air Capture of CO2 with Metal Nitrate-Doped, Tetraethylenepentamine-Functionalized SBA-15 Adsorbents

Photo-swing CO2 capture using aminopolymers as sorbents and TiN light absorber

Kinetic research on ion exchange regeneration of quaternary ammonium-based CO 2 sorbent for direct air capture