Abstract:Abstract The InAs/GaSb superlattice infrared detector has been developed with tremendous effort. However, the performance of it, especially long-wavelength infrared detectors (LWIR), is still limited by the electrical performance and optical quantum efficiency (QE). Forcing the active region to be p -type through proper doping can highly improve QE, and the gating technique can be employed to greatly enhance electrical performance. However, the saturation bias voltage is too high. Reducing the saturation bias voltage has broad prospects for the future application of gate voltage control devices. In this paper, we report that the gated P + – π –M–N + InAs/GaSb superlattice long-wavelength infrared detectors exhibit different π region doping levels that have a reduced minimum saturation bias at − 10 V with a 200-nm SiO 2 layer after a simple and effective anodic vulcanization pretreatment. The saturation gate bias voltage is much lower than − 40 V that reported with the same thickness of a 200-nm SiO 2 passivation layer and similar structure. The optical and electrical characterization indicates that the electrical and optical performance of the device would be weakened by excessive doping concentration. At 77 K, the 50% cutoff wavelength of the device is about 8 μm, the 100% cutoff wavelength is 10 μm, the maximum quantum efficiency is 62.4%, the maximum of responsivity is 2.26 A/W at 5 μm, and the maximum RA of the device is 1259.4 Ω cm 2 . Besides, the specific detectivity of Be 780 °C-doped detector without gate electrode exhibits a peak of 5.6 × 10 10 cm Hz 1/2 /W at 5 μm with a 70-mv reverse bias voltage, which is more than three times that of Be 820 °C-doped detector. Moreover, the peak specific detectivity could be further increased to 1.3 × 10 11 cm Hz 1/2 /W at 5 μm with a 10-mv reserve bias voltage that has the bias of − 10 V at the gate electrode.

Efficient Electroabsorption Modulation of Mid- and Far-Infrared Radiation by Driving the Band-Inversion Transition of In As / Ga Sb Type-II Quantum Wells

Modeling of Ultrafast Waveguided Electro-Absorption Modulator at Telecommunication Wavelength (λ = 1.55 Μm) Based on Intersubband Transition in an InGaAs/AlAs/AlAsSb Asymmetric Coupled Double Quantum Well Lattice-Matched to InP

InGaAsP Multiple-Quantum-Well Electroabsorption Modulator Integrated With V-Cavity Laser

InGaAs/InGaAsP Diffused Quantum Wells Optical Amplifiers and Modulators

Theoretical analysis of InGaAsP/InGaAsP multiple-quantum-wells electroabsorption modulators for the application of high-speed low driving voltage integrated light source

Electro-absorption Modulated 53 Gbps Widely Tunable Laser Based on Half-Wave V-coupled Cavities

An 80Gb/s Ge Waveguide Electro-Absorption Modulator

Nonvolatile High-Contrast Whole Long-Wave Infrared Emissivity Switching Based on In3SbTe2

Monolayer WS2 based electro-absorption modulator

Fast Thermo-Optical Modulators with Doped-Silicon Heaters Operating at 2 Μm.

Metamorphic InGaAs/InAsPSb Quantum Well Light Emitting Diodes for Operation in the Short‐Wave Infrared Region

Mid-infrared (MIR) Mach-Zehnder Silicon Modulator at 2μm Wavelength Based on Interleaved PN Junction

80Gb/s NRZ Ge Waveguide Electro-Absorption Modulator.

Thermally Tunable GeSi Electro-Absorption Modulator with a Wide Effective Operating Wavelength Range

High-Performance Anodic Vulcanization-Pretreated Gated P+–π–M–N+ InAs/GaSb Superlattice Long-Wavelength Infrared Detector

Optimization of Multiple Quantum Well Electroabsorption Modulators Based on Transmission Performance Simulation

Semiconductor Saturable Absorber Mirror in the 3–5 Μm Mid-Infrared Region

1.3-µm identical active electro-absorption modulated laser with quantum well intermixed passive waveguide

A 10-Ghz Bandwidth Electroabsorption Modulated Laser by Ultra-Low-Pressure Selective Area Growth

A novel mid-infrared thermal emitter with ultra-narrow bandwidth and large spectral tunability based on the bound state in the continuum

Low Driving Voltage Band-Filling-Based Iii-V-On-Silicon Electroabsorption Modulator