Abstract:Applying an established technique known as sol–gel autocombustion, Mn-enhanced Li-Ni-Mn-Zn (LNMZ) ferrite nanoparticles with nominal compositions of Li 0.15 Ni 0.20 Mn 0.10+x Zn 0.40-x Fe 2.15 O 4 , where x = 0.00 to 0.10 in the step of 0.05, were synthesized in this investigation. Prepared disk- and toroid-shaped specimens were sintered in the air for 5 h at different temperatures. The XRD was utilized to examine structure-related indicators like phase identification, crystallite size, and the lattice constant of the samples. The crystallite size of the specimens was in the range of 41 to 46 nm, which was calculated at the sintering temperature (T S ) of 1523 K. Theoretical and bulk densities declined with enhanced Mn concentration, whereas the lattice constant and porosity improved slightly. As expected, density rises and porosity decreases with increasing T S (from 1373 to 1523 K). The average grain diameter was found to increase with increasing Mn 2+ ions, which was determined by the linear intercept technique. For the maximum Mn 2+ ions (x = 0.10) of this investigation at T S = 1523 K, the real part of initial permeability achieves its largest value (=439), and improves 27 % in comparison with the preliminary composition (x = 0.00). For the same sample, the relative quality factor, significantly enhanced, reaches the highest value (=20015), which is 60 % larger compared to the parent composition of the LNMZ ferrites. With the addition of the Mn content, the Néel temperature declines from 573 to 558 K. The real part of the dielectric constant, dielectric loss tangent, the real part of the impedance, the Cole-Cole plots, and ac conductivity were analyzed to disclose the facts about the dielectric features of the current LNMZ nano-ferrite materials.

The formation mechanism of MnZn ferrite by the CTAB-assisted synthesis

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Preparation and Magnetic Properties of ZnCuCrLa Ferrite and Its Nanocomposites with Polyaniline

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Preparation and Properties of Nanosize MnZn Ferrite from Δ-Feooh

The Effect of the Calcination Time on the Microstructure and Properties of MnZn Ferrite Powders

Synthesis and Characterization of Single Crystalline Mnooh and Mno2 Nanorods by Means of the Hydrothermal Process Assisted with Ctab

Synthesis and Magnetic Properties of Mn-Zn Ferrite Nanoparticles

Room Temperature Preparation of Nanocrystalline MnCuZn Ferrite Powder by Auto-Combustion of Nitrate-Citrate Gels

Preparation of the Percolative Nickel-Zinc Ferrite/Barium Titanate Composite Ceramics with Liquid-Solid Hybrid Method

Synthesis and Characterization of Titania-Coated Mn-Zn Ferrite Nanoparticles

Functionalization of carbon nanotubes with magnetic nanoparticles: general nonaqueous synthesis and magnetic properties.

Formation of manganite fibers under the directing of cationic surfactant

SYNTHESIS OF NANOCRYSTALLINE Mn_(0.6)Cu_(0.2)Zn_(0.2)O(Fe_2O_3)_(0.98) FERRITE BY SOL-GEL AUTO-COMBUSTION METHOD AND CHARACTERIZATION OF ITS MAGNETIC PROPERTIES

Mn-enhanced Li-Ni-Mn-Zn nano-ferrites: Synthesis, characterization, and evaluations of structural, morphological, magnetic, and dielectric features

The Preparation and Haracterization of Nanograined soft Magnetic Mn-Zn Ferrite

Microwave-assisted preparation and in vitro characterizations of doped superparamagnetic ferrite nanoclusters

Effects of Mno2 on the Electromagnetic Properties of Nicuzn Ferrites Prepared by Sol-Gel Auto-Combustion

Effect of nanoparticles on the magnetic properties of Mn–Zn soft ferrite

Preparation of low-temperature sintered Mn doped Mg-Cu-Zn ferrites by sol-gel self-combustion method

CTAB-mediated synthesis of iron–nickel alloy nanochains and their magnetic properties