Abstract:In order to improve the torque/speed characteristics of the variable flux reluctance machines (VFRMs), an optimal voltage distribution method is proposed to maximize the utilization of the DC‐link voltage. With the help of the investigation of operating range of armature and excitation voltage of single‐leg excitation VFRM, the optimal armature voltage and the zero‐sequence voltage can be obtained. Experiments show that the torque/speed characteristics of the VFRM driven by single‐leg converter can be significantly improved. In order to improve the torque/speed characteristics of the variable flux reluctance machines (VFRMs), an optimal voltage distribution method is proposed to maximize the utilization of the DC‐link voltage. According to the investigation of operating range VFRM driven by single‐leg converter, the optimal armature voltage and the zero‐sequence voltage can be obtained to generate adjustable zero‐sequence current. Thus, the DC‐link voltage utilization and output capacity of VFRM can be significantly improved by optimizing the zero‐sequence current. For verification, the test results on a prototype 6/4 VFRM with single‐leg excitation are presented. The experimental results indicate that, compared with the constant zero‐sequence current control, the DC‐link voltage utilization of the VFRM with proposed method increases by 11.13% together with 36.67% higher output torque at rated speed.

Maximization utilization of DC‐link voltage in variable flux reluctance machine with field winding driven by single‐leg converter

A Doubly-Fed Variable Flux Reluctance Machine with Integrated Stator Field and Armature Winding and Rotor Armature Winding

Performance Analysis of DC-Biased Modular Linear Variable Flux Reluctance Machines

Optimal Designs of Wound Field Switched Flux Machines with Different DC Windings Configurations

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

A Novel Doubly-Fed Flux Reversal Linear Machine with Armature Windings Wound on Both Stator and Mover Teeth

Influence of End-Winding on Optimal Design Parameters for Maximum Torque of DC Excited Flux-Switching Machines

Comparative Study of Flux-Switching PM and EE Machines with Dual Armature Winding Configuration

XInvestigation of vibration and noise in novel variable flux reluctance machine with reference to switched reluctance machine

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

DC-Field Excitation Variable Flux Reluctance Starter Generator With Modular Structure for Fault-Tolerant Capability Improvement

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

Novel Fault-Tolerant Doubly Fed Flux Reversal Machine with Armature Windings Wound on Both Stator and Rotor Teeth

Modified Voltage Vector Modulation Strategy for Open-Winding FMDRM Drives With Switching Action Reduction Capable of ZSV Regulation

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

Thrust ripple and inductances characteristics of a hybrid-excited flux-switching linear machine

Research of V/f Control Method for Multiphase Induction Motor with Non-sinusoidal Supply at Low Speed

Maximum Torque Output for Volts/hz Controlled Induction Machines in Flux-Weakening Region

A Novel High-Order-Harmonic Winding Design Method for Vernier Reluctance Machine With DC Coils Across Two Stator Teeth

Deep Flux Weakening Control With Six-Step Overmodulation For A Segmented Interior Permanent Magnet Synchronous Motor