Abstract:This research investigates the effect of various fibers on the strength and flexibility of concrete from an educational perspective. In this research, the use of additives including types of fibers (macrosynthetic fibers, polypropylene, and glass fibers) which make up 1% of the volume of hybrid concrete is taught. The combined addition of these fibers to create the hybrid reinforced concrete with high tensile strength and plasticity is discussed in this education. The tensile strength results obtained from direct and indirect methods have significant differences. In the concrete laboratory, multiple experiments were carried out to determine the best fiber composition using two different types of fibers. The experiments included direct tensile testing using the compressive-to-tensile force conversion (CTFC) method, which is a new approach, and indirect tensile testing using the Brazilian disk method. The loading rate for the tests was 1 kg/sec. The average tensile strength was 3.3 MPa, and the average compressive strength was 35 MPa. The Young's modulus was measured to be 20 GPa. The results showed that macrosynthetic fibers were more effective in increasing the concrete's tensile strength compared to other combinations. The tests performed on the effects of combining glass fibers with macrosynthetic fibers compared to combining macrosynthetic fibers with polypropylene show a more effective tensile strength. In this article, the direct tensile strength of concrete samples is evaluated by introducing an innovative tensile test device with a ring-shaped sample. The results obtained from this new device have been numerically compared with the uniaxial direct tension method proposed by ISRM. The educational measures of this new knowledge regarding concrete additives and performing innovative tensile strength tests and comparing them with each other provide a detailed understanding of concrete strength evaluation.

Improving the tensile strength of reinforced concrete: evaluating the impact of different fiber additives through numerical and experimental analysis

Investigating the Effect of Various Fibers on Plasticity and Compressive Strength of Concrete Samples

Experimental Study on Mechanical and Durability Properties of Glass and Polypropylene Fiber Reinforced Concrete

The Synergistic Effects of Different Types of Hybridized Synthetic Fibers on Concrete Post-Crack Residual Strength

Strengthening of Reinforced Concrete Beams with Textile-Reinforced Concrete

Effect of fiber hybridization on mechanical properties of concrete

Improvement in the strength of concrete reinforced with agriculture fibers: Assessment on mechanical properties and microstructure analysis

Experimental investigation of single and hybrid-fiber reinforced concrete under drop weight test

Experimental study on the axial tensile properties of polypropylene fiber reinforced concrete

Experimental Study of Dynamic Tensile Strength of Steel-Fiber-Reinforced Self-Compacting Concrete Using Modified Hopkinson Bar

Tensile Behavior of Hybrid Fiber-Reinforced Ultra-High-Performance Concrete

Property Assessment of High-Performance Concrete Containing Three Types of Fibers

Composite Fiber Wrapping Techniques for Enhanced Concrete Mechanics

Tensile Strength and Mode I Fracture Toughness of Polymer Concretes Enhanced with Glass Fibers and Metal Chips

Experimental Study on Hybrid Effect Evaluation of Fiber Reinforced Concrete Subjected to Drop Weight Impacts.

Evaluation of the Tensile Characteristics and Bond Behaviour of Steel Fibre-Reinforced Concrete: An Overview

Effect of fiber type, shape and volume fraction on mechanical and flexural properties of concrete

Experimental investigations on tensile strength and fracture toughness of a polyoxymethylene fiber reinforced concrete

Influence of fiber treatment methods on the mechanical properties of high strength concrete reinforced with sisal fibers

Performance evaluation of indented macro synthetic polypropylene fibers in high strength self-compacting concrete (SCC)

Ultra‐high performance concrete under direct tension: Investigation of a hybrid of steel and synthetic fibers