Abstract:As the civil aviation industry advances, higher requirements are put forward for the performance of airport cement pavement . The frequent takeoffs and landing of aircraft will cause continuous and large impact load on airport pavement, and combined with long-term natural factors, there will be various structural diseases. These diseases not only affect the service life of pavement, navigation safety. To enhance the impact resistance and durability of concrete, the incorporation of fiber has proven an effective approach, and basalt fibers (BF) and polypropylene fibers (PF) are selected as reinforcement materials in this study. Firstly, the effects of single BF and hybrid BF and PF on the mechanical properties of concrete were explored through compressive and flexural tests considering fiber volume contents (0.1%, 0.15, 0.2%) and lengths (6 mm, 9 mm, 12 mm). Then, the drop hammer impact test method, recommended by ACI committee 544, was refined to evaluate the impact resistance toughness of concrete. Finally, the numerical simulation of the impact test was established to explain the concrete impact damage mechanism. The results show that under less than 0.15% volume content, the single BF can effectively enhance the compressive strength , flexural strength, and impact resistance of concrete. Compared with the single BF, the combination of 12 mm BF and 6 mm PF yields favorable results, encompassing improved mechanical properties and impact resistance, thus exhibiting a positive hybrid effect. The increase in PF length (9 mm) leads to a reduction in compressive strength but an improvement in flexural strength and impact resistance. The simulation of the impact test is constructed and the accuracy is confirmed by comparing the impact times and failure patterns of the specimens. The tensile damage of plain concrete is much greater than the compressive damage, and the cracks will spread rapidly from the upper surface to the lower surface. Compared with plain concrete, the crack width of hybrid fiber reinforced concrete is larger, but the damage degree is more uniform. Fiber can absorb a large amount of impact energy, reduce the emergence of micro-cracks, and improve the impact toughness and toughness coefficient of concrete.

Experimental investigation of single and hybrid-fiber reinforced concrete under drop weight test

Experimental Study on Hybrid Effect Evaluation of Fiber Reinforced Concrete Subjected to Drop Weight Impacts.

Impact resistance and mechanical properties of fiber‐reinforced concrete using string and fibrillated polypropylene fibers in a hybrid form

An experimental and numerical study on the hybrid effect of basalt fiber and polypropylene fiber on the impact toughness of fiber reinforced concrete

Effectiveness of hybrid steel-basalt fiber reinforced concrete under compression

Experimental Study on Impact Performance of Basalt-Polypropylene Fiber Reinforced High-Performance Concrete

Hybrid Effect Evaluation of Steel Fiber and Carbon Fiber on the Performance of the Fiber Reinforced Concrete.

Improving the tensile strength of reinforced concrete: evaluating the impact of different fiber additives through numerical and experimental analysis

Investigation of Impact Resistance of High-Strength Portland Cement Concrete Containing Steel Fibers

Impact Mechanical Properties of Concrete Reinforced with Hybrid Carbon Fibers

Effect of fiber hybridization on mechanical properties of concrete

The Synergistic Effects of Different Types of Hybridized Synthetic Fibers on Concrete Post-Crack Residual Strength

Hybrid fiber concrete with different basalt fiber length and content

Effect of Fiber Hybridization, Strain Rate and w/c Ratio on the Impact Behavior of Hybrid FRC

Investigating the Effect of Various Fibers on Plasticity and Compressive Strength of Concrete Samples

Research on the Impact Response and Model of Hybrid Basalt-Macro Synthetic Polypropylene Fiber Reinforced Concrete

Efficiency Of Basalt Fiber Length And Content On Mechanical And Microstructural Properties Of Hybrid Fiber Concrete

Effect of fiber type, shape and volume fraction on mechanical and flexural properties of concrete

Property Assessment of High-Performance Concrete Containing Three Types of Fibers

Study on Mechanical Properties and Optimum Fiber Content for Basalt/Polyacrylonitrile Hybrid Fiber Reinforced Concrete

Experimental analysis of torsional behavior of hybrid fiber reinforced concrete beams