Abstract:The production of nitrogen fertilizer in China generates a substantial quantity of gasifier coke (GFC) as an industrial by-product, posing challenges for its effective recycling. In this study, a combination of co-hydrothermal carbonization (co-HTC) and pelleting technology was employed to convert pomelo peel (PP) and GFC into fuel pellets. Notably, these two feedstocks, characterized by significantly distinct physicochemical properties, exhibited beneficial complementarity, mitigating the limitations of using a single feedstock for fuel preparation. The severe caking and non-uniformity of PP hydrochar resulted in significant flaws in the pellets prepared through direct blending with GFC. The co-HTC technology significantly alleviated the poor processability of PP hydrochar and the low energy density of PP hydrochar pellet while greatly improving the flammability of GFC and the mechanical strength of GFC pellet. The results demonstrated a significant enhancement in uniformity of hydrochar after co-HTC, leading to a reduction in compression energy consumption to 6.16–7.62 J/g and an increase in pellet energy density to 30.60–35.08 GJ/m3. The ignition temperature and the activation energy of GFC were significantly reduced. The co-HTC technology effectively addressed the challenge of GFC pelletizing by achieving fuel pellets with a compressive strength of 11.89 MPa and a drop resistance of 99.8 %. Interestingly, the co-HTC process showed significant synergistic effects, increasing the energy yield of PP hydrochar to 73.38–92.9 % and effectively reducing the ash and sulfur content in GFC to 4.99–11.92 % and 0.35–0.55 %, respectively. The most pronounced synergistic effects were observed when blending PP and GFC in a 5:5 ratio. The complementarity of feedstocks and the synergistic effects of co-HTC converge to facilitate the conversion of biomass and industrial waste into high-performance fuel pellets.

Feasibility of Pine Bark Pellets and Their Pyrolyzed Biochar Pellets as Fuel Sources in Molten Hydroxide Direct Carbon Fuel Cells

The effect of biomass pyrolysis temperature on the performance of biochar-fed molten hydroxide direct carbon fuel cells

Application of Biochar Derived from Different Types of Biomass and Treatment Methods as a Fuel Source for Direct Carbon Fuel Cells

In-situ catalytic gasification of kelp-derived biochar as a fuel for direct carbon solid oxide fuel cells

Review—Bibliometrics and Current Research Trends on Direct Carbon-Solid Oxide Fuel Cells Utilizing Biomass as Fuel

FeS As a Promising Cathode Catalyst for Direct Borohydride Fuel Cells

Biomass-Based Fuels and Activated Carbon Electrode Materials: An Integrated Approach to Green Energy Systems

Carbon Deposition Mitigation Strategies in Proton-Conducting Solid Oxide Fuel Cells: A Case Study with Biomass Fuels

Cedar Wood-Based Biochar: Properties, Characterization, and Applications as Anodes in Microbial Fuel Cell

Feasibility analysis and environmental impact evaluation of biochar derived from mango pit for blast furnace injection

A novel Chinese parasol leaf biochar fuelled direct carbon solid oxide fuel cell for high performance electricity generation

Highly efficient direct carbon solid oxide fuel cells operated with camellia oleifera biomass

Thermodynamic analysis of a novel integrated biomass pyrolysis-solid oxide fuel cells-combined heat and power system for co-generation of biochar and power

A Comparative Study of Different Carbon Fuels in an Electrolyte-Supported Hybrid Direct Carbon Fuel Cell

Comprehensive Study on the Feasibility of Pyrolysis Biomass Char Applied to Blast Furnace Injection and Tuyere Simulation Combustion

Direct Borohydride Fuel Cell Performance Using Hydroxide‐conducting Polymeric Nanocomposite Electrolytes

Co-hydrothermal carbonization of pomelo peel and gasifier coke for production of fuel pellets: Complementarity of feedstocks and synergistic effects

Easily-prepared macroporous-mesoporous carbon from palm fiber as a sustainable anode for high-performance microbial fuel cells

Feasibility analysis of plastic and biomass hydrochar for blast furnace injection

A novel biomass modified brown coal as composite fuel for high performance direct carbon solid oxide fuel cells

Porous Carbon as Anode Catalyst Support to Improve Borohydride Utilization in a Direct Borohydride Fuel Cell