Abstract:Exergoeconomic assessment of an energy conversion system based on energy-exergy analysis and appropriate economic principles, is essential to identify the costs of the inefficiencies both for the whole integrated system and for individual energy components. The current study contributes to an exergoeconomic analysis focusing on the steady-state performance of a biomass-fed combined heat and power (CHP) system including a two-stage auto-thermal biomass gasifier, a direct internal reforming planar solid oxide fuel cell (DIR-PSOFC) and a micro-gas turbine (mGT). A one-dimensional model of the DIR-PSOFC is used to investigate the temperature gradient within the solid structure of the fuel cell under different operating conditions. In order to assess the effect of the main system input parameters on the performance of the cogeneration system, a comprehensive parametric analysis is carried out. The results show that the highest rate of exergy destruction takes place in the gasifier with an amount of 39.23%, followed by the afterburner and the SOFC due to the highly irreversible nature of the process of these components. The system input exergy supplied by biomass is 525.7 kW, of which 53.2% is wasted in the system components and the exergy efficiency of the total CHP system is determined to be 49.72%. Furthermore, the results indicate that the highest exergy destruction cost rate is related to the afterburner with 2.39 ($⁄h). Based on the results of the sensitivity analysis, the trends of the performance parameters demonstrate some conflicts with the variation of the operating parameters, which implies the necessity of an optimization procedure. In all the operating conditions considered, the temperature difference along the cell length is kept below the maximum allowable temperature gradient, which is 150 K. Two-step multi-objective optimization has been conducted by use of non-dominated sorting genetic algorithm technique. Significant and newsworthy relationships between the optimal operating parameters and the considered design variables have been unveiled using the Pareto-based multi-objective optimization procedure.

Thermodynamic analysis of a novel integrated biomass pyrolysis-solid oxide fuel cells-combined heat and power system for co-generation of biochar and power

Negative Emission Power Plants: Thermodynamic Modeling and Evaluation of a Biomass-Based Integrated Gasification Solid Oxide Fuel Cell/Gas Turbine System for Power, Heat, and Biochar Co-Production—Part 1

Biomass pyrolysis for biochar or energy applications? A life cycle assessment

Comprehensive performance assessment of a novel biomass-based CCHP system integrated with SOFC and HT-PEMFC

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Comparative Study of Process Simulation, Energy and Exergy Analyses of Solar Enhanced Char-Cycling Biomass Pyrolysis Process

Synergistic Combination of Pyrolysis, Anaerobic Digestion, and CHP Plants.

Exergoeconomic Analysis and Multi-Objective Optimization of an Integrated CHP System Based on Syngas-Fueled Planar Solid Oxide Fuel Cell

Confirmation of the Feasibility of Using Agrobyproduct Biochar in Thermal Power Plants through Oxygen Pyrolysis and Conventional Pyrolysis

Achieving near-zero emission and high-efficient combined cooling, heating and power based on biomass gasification coupled with SOFC hybrid system

Energy, exergy, exergoeconomic, and environmental analyses and multi-objective optimization of a biomass-to-energy integrated thermal power plant

Retrofitting Biomass Combined Heat and Power Plant for Biofuel Production—A Detailed Techno-Economic Analysis

Achieving high-efficiency conversion and poly-generation of cooling, heating, and power based on biomass-fueled SOFC hybrid system: Performance assessment and multi-objective optimization

Thermodynamic Analysis and Possible Applications of the Integrated Pyrolysis Fuel Cell Plant (IPFCP)

Thermodynamic analysis of a novel combined heating and power system based on low temperature solid oxide fuel cell (LT-SOFC) and high temperature proton exchange membrane fuel cell (HT-PEMFC)

Experimental Study of Biochar Production Process Using a Pilot Carbonization Kiln as a Biofuel’s Properties Improvement Module

Multi-aspect analysis and optimization of biomass-fueled multi-generation plant

Performance Study of Biomass Pyrolysis, Char Gasification and Oxy-Fuel Combustion Integrated System

New Process Combining Fe-Based Chemical Looping and Biomass Pyrolysis for Cogeneration of Hydrogen, Biochar, Bio-Oil and Electricity with In-Suit CO2 Separation

Assessment of low‐rank coal and biomass co‐pyrolysis system coupled with gasification

Bio-oil and biochar from the pyrolytic conversion of biomass: A current and future perspective on the trade-off between economic, environmental, and technical indicators